CHIEF MSB-6134 User manual

INSTALLATION INSTRUCTIONS

8840-000008 REV. A 10/14/05

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: [email protected]

MSB-6134

LCD DISPLAY MOUNTING BRACKET

Prior to assembly, unpack carton completely and verify contents.

If you are missing any of the following components, please contact Customer Service at 1-800/582-6480.

Figure 1

(2) LCD Interface Side Brackets (2) LCD Interface Center Brackets

(4) Mounting Buttons (4) 10-24 x .5” Button Head Cap Screws

(4) ¼-20 x .5” Button Head Cap Screws (8) M5 x 35mm Phillips Head Cap Screws

(8) .50 x .194 x .50 Nylon Spacers (1) 1/8” Allen Key

(1) 5/32” Allen Key

BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY

CAUTION! LCD DISPLAYS ARE EXTREMELY FRAGILE.

NOTE: If installing screen on a Chief J-series wall mount, proceed to Step 3 (J-Series VESA Interface Installation).

1. Chief Q-latch Button Installation (Used with MSR, MTR, MWH, MWR, MCS and MCD mounts): Using a

10-24 button head cap screw inserted from back side of bracket, secure mounting button, with chamfered hole of

mounting button (larger surface) facing bracket, to center brackets (four places) (see Figure 2 and Figure 3).

2. Proceed to Step 4 (Side Bracket Assembly).

Figure 2

Figure 3

Installation Instructions MSB-6134

3. J-Series VESA Interface Installation: Using the 10-24 x .5” button head cap screws along with the 10-24 Nylock

nuts (provided with J-series mount), attach VESA interface from J-Series mount to center brackets (See Figure 4

and Figure 5).

Figure 4

Figure 5

4. Side Bracket Assembly: Attach center brackets to side brackets using the ¼-20 screws (see Figure 6 and Figure 7).

Figure 6

Figure 7

5. Interface Installation: Using M5 screws and nylon spacers, secure side brackets to display (see Figure 8 and

Figure 9). Do not over tighten screws. The ¼-20 button head cap screws attaching the side and center brackets may

need to be loosened in order to line up holes on display. If this is done, please be sure to tighten them once again.

6. Follow the Chief mount instruction manual for screen installation.

Figure 8

Figure 9

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 