7
) Once a Tin1eZone is selected. your Aton1ic Clock \Nillstart to search
for the ato111icsignal
3. \Vhi!c the Ato111icClock is seeking for the signal, the icon vvillpulsate
gradually indicating the search n1ode.
4. If valid signal is available. the Aton1ic clock \vi!] decode the Local
~
.
Tin1e in about 3-5 111inutes.The FULL to,\er icon and ··QI(" \Vil]
appear on the display.
). If the first reception is not successful, the clock ,vill atternpt EVERY
hour until the ti111eis decoded.
6. If signal is not available ,vhen setting up, enter the present tin1e and
date by following the n1anual setup".
1\1anualsetup:
A. Select the correct tin1e.day/elate:
I. Press and hold "set" button for three seconds to begin n1anual setup
111odeindicated by flashing year (default 2000).
Adjust year by pressing the+ or --
3. Press "set" again to confin11.
~
4. Adjust flashing 111011thusing the+ or - and eonfirn1 by
pressing the set button.
:,_ Adjust flashing elatein like 111a1111erand confirn1.
6. Select 12/24 hour (regular/111ilitary)in like 111annerand
eonfirn1.
7. Adjust the correct hour in like 111annerand confin11.
8. Adjust the conect 111inutein like nE1nnerand confirn1.
B. Selecting [)ST (Daylight Savings Tin1e):
1. Hold TI?v1EZO?"iEburton for 3 seconds to enter uaylight Saving
Tirriesetting inode. "DST ON" (cici~1ulrseningJ \Villappear on the
screen in the "second's" position of ti111edisplay.
2. Press and release THv1EZONE button to select betvveen DST on
(Uaylight Saving Tin1c on) to DST off (Daylight Saving Tin1e off).
2
