Chairman T9iSimple User manual
T9iSimple (TS-6000) User Manual | Please save this user manual and read all instructions carefully before using.
Product Structure ............................................... P 1
Product Functions and Descriptions....................... P 2
Safety Precaution ............................................... P 4
.... P 5
Daily Maintenance, Basic Troubleshooting Guide
......................................... P 6
Product Specifications
Setup Instructions .............................................. P 3
Caster
AC Power Cord
Headrest Pillow
6 Massage Roller
Heated Seat
Remote Control
Storage Pouch
Power Cord
Connector
Fuse
Power Switch
Backrest
Product Structure
01
Calf Shiatsu Massage Footrest
CHAIRMAN
Remote Control
iSimple
Power ON/OFF
1st press: ON
2nd press: OFF
A1 A2 A3 with 30 minutes
programmed massage
Automatic Program
Selection Button
1ST press: ON
2nd press: OFF
1st press: ON
2nd press: OFF
1st press: ON
2nd press: OFF
This function can work with other manual
functions except under AUTO program.
This function can work with other manual
functions except under AUTO program.
This function can work with other manual
functions except under AUTO program.
Time
Manual timer
setting for 10/20/30 minutes
Kneading
Tapping
COMBINATION
Region
1st: Turn on full body rolling massage
2nd: Turn on regional rolling massage
3rd: Turn off rolling massage
Region Roll (DOWN)
Region Roll (UP)
Footrest Down
Footrest Up
Backrest Recline
Backrest Incline
Heating
Calf Shiatsu Timer
To show the massage time and
massage mode
88
KNEADING
AUTO
TAPPING COMBINATION
REGION
CALF SHIATSU
HEATING
BACKREST FOOTREST ROLLER
ON/OFF
AUTO
KNEADING
TAPPING
COMBINATION
REGION
CALF SHIATSU
HEATING
BACKREST(UP)
BACKREST
(DOWN)
FOOTREST(UP)
FOOTREST
(DOWN)
※Please select the massage time in the beginning.
ROLLER(UP)
ROLLER(DOWN)
SET TIME
TIME
Product Functions and Descriptions
1st press: ON
2nd press: OFF
1st press: ON
2nd press: OFF
By continuously pressing this button
to adjust the backrest angle.
Press twice, the backrest can
automatically incline to maximum a
By continuously pressing this button
to adjust the backrest angle.
Press twice, the backrest can
automatically recline to maximum angle.
By continuously pressing this button
to adjust the footrest angle.
Press twice, the backrest can
automatically up to maximum angle.
By continuously pressing this button
to adjust the footrest angle.
Press twice, the backrest can
automatically down to maximum angle.
By continuously pressing this button
to adjust the rollers up to the desired position.
This function can work with other manual
functions except under AUTO program.
By continuously pressing this button
to adjust the rollers down to the desired
position.This function can work with other
manual functions except under AUTO program.
02
Setup Instructions
Step 1
Take out the chair from the box, raise the
chair back slightly and place it levelly in
the depressed U-shaped slots, then attached
the backrest to the seat with the bolt.
Take U-shaped props on the bottom of
the backrest and adjust the electric screws
and black iron pipe to the position
shown on the diagram; then fix the
bolts and the R-pin. (Please do not
carelessly adjust the electric screws)
Step 2
Insert the left armrest into the fixed slots
on the chair seat then fix the back of the
armrest with small swivel knobs.
Step 4
Check again to make sure all steps
are done properly. The chair is ready
for use.
Step 3
Find the connectors (white/yellow/pink/black)
underneath the seat cushion and connect them to
the same colored cables. Insert the right
armrest into the fixed slots on the chair
seat then fix the back of the armrest
with small swivel knobs.
03
iSimple
Safety Precautions
04
iSimple
1.Unplug the power cord when doing maintenance.
2.Place the unit in its box or in a safe, dry, cool place.
3.DO NOT expose the chair directly to sunlight and DO NOT use the chair in a dirty, greasy, smoggy or humid environment.
4
Daily Maintenance
Basic Troubleshotting Guide
05
Problem
Device stopped suddenly
Spare parts loosen
* The device emits a certain amount of
This is not an abnormality.
Cause Countermeasure
Does not operate
Excessive use and overheat.
Overloaded.
Make sure power is on and check each end of the power cord and
make sure each end is securely plugged in.
* Make sure power switch is on.
* Check if the power failure.
Do not sit or rest heavy objects on chair. Please keep proper lying
angle to enjoy the massage.
Contact the CHAIRMAN customer services for repairs.
Power cord damaged or smoky If an abnormality is detected, do not use and contact the CHAIRMAN customer services for repairs.
Mode Name:
Model Number:
Voltage Available:
T9 iSimple
TS-6000
AC 110-240V;50-60Hz
Power Consumption: 120W
Straight: 127cm(L) x 78cm(W) x 114cm (H) Recline: 170cm(L) x 78cm(W) x 71cm (H)
Weight:
Massage Route:
55KGS
71CM
The Place of Origin: Taiwan
Chair Dimension:
Product Specifications
B S M I
06
CHAIRMAN
按摩椅
This manual suits for next models
1
Table of contents
Other Chairman Massager manuals
