10
Operating Instructions:
6 seconds
9
Operating Instructions:
2 seconds
Turning the headset on:
1. Press and hold the Talk
button for about 6 seconds,
until the green LED flashes
and there is a brief tone
from the speaker.
2. The headset is now on and
in Standby mode.
Note: If the battery is low,
the red LED will flash.
Turning the headset off:
1. Press and hold the Talk button
for approx. 2 seconds. The red
LED will flash and there will be
a brief tone from the speaker.
The unit will then power off.
Pairing
®
1) Put the Bluetooth device within 30 cm. of the headset.
2) Make sure the headset is off. Keep pressing the Talk button for
about 6 seconds until the red and green LED indicators flash alternately.
The earpiece is now in pairing mode.
3) Perform a device discovery from your phone. (For details
on device discovery for your phone, refer to the phone's
user's guide.) When the scan is complete, the phone
displays the devices found.
Before you use the headset, you must pair it with your
®
mobile phone or other Bluetooth device. “Pairing”creates a
®
secure link between Bluetooth devices, and allows the phone
or other device to remember the headset's unique ID. When
the headset is paired to the mobile phone, it will automatically
connect to the mobile phone.
Note:
