CDVI GALEO/W User manual
Edition 10/2006 G0301FR0266V01
MOUNTING KIT
Qty Description Photo Utilisation
1
M4x10 tamper screw GALEO Mounting screw
1
T20 spanner For the M4x10 screw
4
M4x30 mounting screws 2 * keypad back plate
2 * Remote Controller
2 Caps GALEO cap
4
S5 plastic anchor 2 * keypad back plate
2 * Remote Controller
1
05D 680K varistor For the lock
2 Wiring sealed caps Cable to the controller
Dimensions: 110 x 75 x 15 mm
CABLE
Description
Red 12V DC (+)
Black 0V
Brown Buzzer command input
Green Data 0
White Data 1
Blue Clock
Gray 0V common
GALEO/W
ILLUMINATED ONLINE KEYPAD
26 BIT OUTPUT FORMAT, CLOCK &
DATA and CDVI OUTPUT FORMAT
INSTALLATION MANUAL
IP 64 DM
Edition 10/2006 G0301FR0266V01
I. GENERAL INFORMATION
A. Description
Input voltage 12V DC
12-digit illuminated keypad keys
EEPROM memory storage
User code in 4, 5 or 6 digits
Buzzer
ST1 jumper for programming
B. Default values
Illumination duration: 10 seconds
User code lenght: 5 digits
26 bit wiegand output
Buzzer disabled
C. Audible Signal
1 short beep keypad powered and key presses
1 long beep data computing in programming
2 short beeps Entry or Exit from programming
4 short beeps data computing error
D. Code Length
The user code must be in 4, 5 or 6 digits.
All the keypad keys can be used to program a user code except the B key.
Enter the user code and then B to validate the code.
E. Consumption
80mA in 12 VDC (permanent illuminated keys)
II. PROGRAMMING
A. Entry in programming
1. Turn off the power. Put the switch to ON. Put back the power.
2. Two beeps are emitted to confirm entry in programming.
The command control of the buzzer is not possible in programming mode.
B. Illumination duration
1. Enter in programming.
2. Enter A0 to program the illumination duration. One beep is emitted. Enter the time in
seconds – 10 for 10 seconds to 99 for 99 seconds or enter 00 for a permanent illumination.
One beep is emitted to confirm the illumination duration.
A0
Edition 10/2006 G0301FR0266V01
3. Remove the ST1 jumper. Two beeps are emitted to confirm exit from programming.
C. Output format
1. Enter in programming.
2. Press A1 to enter in the output format menu. One beep is emitted.
Press 1 to select 26-bit wiegand output format
Press 2 to select CDVI output format
Press 3 to select ISO Track 2 output format
One beep is emitted to confirm programming.
3. Remove the ST1 jumper. Two beeps are emitted to confirm exit from programming.
C. Code length
1. Enter in programming mode.
2. Press A2 to enter in the code length setting menu. One beep is emitted. Press 4 for a 4-digit
user code, press 5 for a 5-digit user code or press 6 for a 6-digit user code. One beep is
emitted to confirm programming.
3. Remove the ST1 jumper. Two beeps are emitted to confirm exit from programming.
4 beeps indicate a data computing error.
D. Audible signal
The audible signal is always enabled in programming mode.
In factory default, the buzzer is disabled when pressing a key. To enable the buzzer:
1. Enter in programming mode.
2. Press A3. One beep is emitted. Press 0 to disable the audible signal. Press 1 to enable the
audible signal. One beep is emitted to confirm programming.
3. Remove the ST1 jumper. Two beeps are emitted to confirm exit from programming.
E. External control of the buzzer
The buzzer can be activated from an external input. The control is done with a logic signal on the
input.
A2
A3
A1
Buzzer enabledBuzzer disabled Buzzer disabled
0V
Edition 10/2006 G0301FR0266V01
F. 26-bit wiegand format
Interfaçage
The output format is 26-bit Wiegand (Signals: DATA1, DATA0 and CLOCK)
Output signal in open collectors (pull up of 2.2K in +5V)
26-bit hexadecimal output format
The frame is made of 26-bit and built as follow:
First parity: 1-bit – even parity for the first 12-bit
User Code: 3 half of a byte represent the code entered
Each byte is transferred from bit 7 to bit 0.
Second parity: 1-bit – odd parity for the last 12-bit
Bit 1 Bit 2 … bit 25 bit 26
Even parity on bit 2…bit13 Data (24 bits) Odd parity on bit 14…bit 25
Example a 4-digit code: 1350 then B
1 0000 0000 0001 0011 0101 0000 1
Parity 1 0 0 1
3 5 0 Parity 2
The code is transmitted in hexadecimal: 001350
Example a 5-digit code: 71350 then B
0 0000 0111 0001 0011 0101 0000 1
Parity 1 0 7 1 3 5 0 Parity 2
The code is transmitted in hexadecimal: 071350
Example a 6-digit code: 671350 then B
0 0110 0111 0001 0011 0101 0000 1
Parity 1 6 7 1 3 5 0 Parity 2
The code is transmitted in hexadecimal: 671350
Parity 1: 0 if the number of 1 in bit 2 to bit 13 is even
1 if the number of 1 in bit 2 to bit 13 is odd
Chronograms
\CLOCK
\DATA1
\DATA0
0 logic 1 logic
50s 50s2ms 2ms
Edition 10/2006 G0301FR0266V01
Parity 2: 0 if the number of 1 in bit 14 to bit 25 is odd
1 if the number of 1 in bit 14 to bit 25 is even
G. CDVI Format
This format is owned by CDVI. This format is compatible with other CDVI products ( PROMI, UCA3 ).
H. ISO 7811 Track 2 Format
SS Characters ES
LRC
SS = start sentinel Hex B
ES = end sentinel Hex F
LRC = Ou Exclusif de tous les caractères de la trame (including SS and ES)
The code length is set at 8 digits:
In 4 digits – 00001234
In 5-digits – 00012345
In 6-digits - 00123456
Each digit is made of 5 bits (4 bits data + 1 bit parity)
Characters
B4 B3 B2 B1 Parity
0 0 0 0 0 1
1 0 0 0 1 0
2 0 0 1 0 0
3 0 0 1 1 1
4 0 1 0 0 0
5 0 1 0 1 1
6 0 1 1 0 1
7 0 1 1 1 0
8 1 0 0 0 0
9 1 0 0 1 1
A 1 0 1 0 1
B = SS 1 0 1 1 0
C 1 1 0 0 1
D = FD 1 1 0 1 0
E 1 1 1 0 0
F = ES 1 1 1 1 1
/Présence
/Data
/Clock
Edition 10/2006 G0301FR0266V01
III. MOUNTING INSTRUCTIONS
Drill (bit Ø5mm) 2 mounting holes
(minimum depth 35mm) and the cable
hole.
Insert the S5 2 plastic anchors in the
holes.
Mount the back plate with the M4x30
screws.
Insert the cable of the GALEO®inside
to cable hole.
Place the GALEO®on the back plate
and slide it from up to down. Make sure
that the mounting bracket is properly
set with the GALEO.
Use the M4x10 screw to close the
keypad (T20 spanner). Place the screw
cap.
To mount the remote controller on the wall use the plastic bracket.
®
GALEO
1
2
3
4
R
Other manuals for GALEO/W
2
Table of contents
Other CDVI Keypad manuals
CDVI
CDVI Digicode DGA User manual
CDVI
CDVI CBB User manual
CDVI
CDVI Digicode Series User manual
CDVI
CDVI Galeo 2 User manual
CDVI
CDVI Krypto K3 Instruction Manual
CDVI
CDVI PROFIL100EINT User manual
CDVI
CDVI Digicode KCIN User manual
CDVI
CDVI KCIN User manual
CDVI
CDVI GALEO 4.0 - Bluetooth User manual
CDVI
CDVI GALEOR User manual
CDVI
CDVI DC100E User manual
CDVI
CDVI GALEOR User manual
CDVI
CDVI GALEO 4.0 - Bluetooth User manual
CDVI
CDVI KCIENSBP User manual
CDVI
CDVI GALEO/W User manual
CDVI
CDVI KRYPTO K4 Instruction Manual
CDVI
CDVI SUBLIM User manual
CDVI
CDVI PROFIL100EINT User manual
CDVI
CDVI KCINBT User manual
CDVI
CDVI PROFIL 100 EC User manual
