Casio CLASSPAD User manual
E-1
20031201
ClassPad Add-In Installer
The ClassPad Add-In Installer lets you install add-in software applications on your ClassPad. Add-in
software applications let you add new functions and configure your ClassPad to your specific needs.
Important!
•Never disconnect the USB cable unless specifically instructed to do so. Doing so can cause the calculator to
malfunction.
Minimum System Requirements
Computer: IBM PC/AT or compatible with USB port
CPU: Intel®Pentium®II 200 or AMD DuronTM, Intel®Pentium®II 300 recommended
Operating System: Windows®98SE/Me or Windows®2000/XP
Disk Space: 100 MB available for installation
Memory: 16 MB, 32 MB recommended
Above values do not include memory required for the operating system.
Video Display: 800 ×600 or higher video adaptor and monitor
Note
•Windows is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
•Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States
and other countries.
•AMD Duron is a registered trademark or trademark of Advanced Micro Devices, Inc. in the United States and/or other
countries.
•Company and product names used herein are trademarks of their respective owners.
E-2 20031201
Contents
1. Installing the ClassPad Add-In Installer ......................................................... E-3
To install the ClassPad Add-In Installer .............................................................. E-3
2. Using the ClassPad Add-In Installer ............................................................... E-5
To use the ClassPad Add-In Installer ................................................................. E-5
To uninstall an add-in application ..................................................................... E-10
3. Checking for Correct Add-In Installation ...................................................... E-11
4. Installing Language Pack Add-In Software .................................................. E-12
To install the Language Pack add-in software .................................................. E-12
E-3
20031201
1Installing the ClassPad Add-In Installer
To install the ClassPad Add-In Installer
1
.Double-click “setup” or “setup.exe”.
2
.Click the [Next] button to advance to the next
screen.
3
.Carefully read the terms and conditions of the license agreement.
4
.If you agree to the terms and conditions of the
license agreement, click “I accept the terms…”, and
then click the [Next] button.
•If you do not agree to the terms and conditions of
the license agreement, click “I do not accept the
terms…” and then click the [Cancel] button to exit
the install procedure.
E-4 20031201
1Installing the ClassPad Add-In Installer
5
.Perform either of the following two operations to
specify the drive and folder where you want to
install ClassPad Add-In Installer.
•To use the default settings, simply click the [Next]
button.
•To specify a different folder, click the [Change...]
button. Specify the folder you want, and then click
the [Next] button.
6
.Click [Install].
7
.Click [Finish].
E-5
20031201
2Using the ClassPad Add-In Installer
Add-in software applications let you add new functions and configure your ClassPad to your specific needs.
The ClassPad Add-In Installer lets you install add-in software applications on your ClassPad.
The steps you need to perform depend on whether you have the ClassPad’s “Wakeup Enable” feature
turned on or off. For information about “Wakeup Enable”, see “Configuring Communication Parameters” in
the ClassPad 300 (page 15-3-1)/ClassPad 300 PLUS (page 16-3-1) User’s Guide.
When “Wakeup Enable” is turned on
Perform the following steps in sequence, from 1 through 17.*
When “Wakeup Enable” is turned off
Perform the steps in the following sequence: 1, 2, 3, 4, 8, 9, 5*, 10, 11, 12, 13, 14, 15, 16, 17.
*Note that you need to perform step 5 only if the “Found New Hardware Wizard” dialog box appear on your
computer screen. The “Found New Hardware Wizard” dialog box appears only the first time you connect
the ClassPad to your computer.
Note
•Specify USB cable for the ClassPad’s “Cable Type” setting. For details, see “Communication Dialog Box” in the
ClassPad 300 (page 13-3-8)/ClassPad 300 PLUS (page 14-3-8) User’s Guide.
•Tapping the [Cancel] button on the ClassPad screen during ClassPad Add-In Installer operation cancels operation on
both the ClassPad and the computer. Conversely, clicking the [Cancel] button on your computer screen also cancels
operation on your ClassPad. After you execute a cancel operation, it will take a few seconds for it to take effect. This
is normal, and does not indicate malfunction.
To use the ClassPad Add-In Installer
1
.Press the ClassPad okey to turn it on.
2
.Scroll down the application menu and
then tap Bto start up the
Communication application.
20050601
E-6 20031201
2Using the ClassPad Add-In Installer
3
.Double-click the “ClassPad Add-In Installer” icon.
•Alternatively, you could also perform the
following operation: [Start] – [Programs]
– [CASIO] – [ClassPad Add-In] –
[ClassPad Add-In Installer].
•Since your ClassPad is not connected to the computer yet, the message “ClassPad - Not connected”
will appear in the left pane.
4
.Use the USB cable that comes with your ClassPad to connect it to the computer.
5
.If the Found New Hardware Wizard appears on your computer screen, perform the steps below to install
the ClassPad USB driver.
•The Found New Hardware Wizard will not appear
if you already have the ClassPad USB driver
installed on your computer. In this case, advance
to step 6.
a. Select “Install the software automatically (Recommended)”
and then click [Next].
(Windows XP only)
20050601
Select “No, not this time”.
(Windows XP SP2 only)
E-7
20031201
2Using the ClassPad Add-In Installer
b. Though a message appears to let you know
that the software has not passed the “Windows
Logo Test”, there is no need for concern. Simply
click [Continue Anyway] and proceed with
installation.
c. Click [Finish].
6
.On your ClassPad, press the ckey.
7
.Tap [OK].
8
.Tap [Link], [Install], and then [Add-In].
20040201
E-8 20031201
2Using the ClassPad Add-In Installer
9
.Tap [OK].
10
.On the ClassPad Add-In Installer window, click .
•After a connection is successfully established
between your ClassPad and computer, the
“ClassPad - Not connected” on the left pane will
be replaced by the add-in applications that are
currently installed on your ClassPad.
11
.Click “Application” in the left pane.
•This causes the add-in applications currently
installed on your ClassPad to appear in the
right pane. If the right pane remains blank, it
means your ClassPad does not have any
add-in applications installed.
12
.Drop the add-in software you want to use onto the right pane.
•This starts installation of the add-in.
•You can also use the following steps to install a single add-in
application.
(1) On the ClassPad Add-In Installer window, click [Add-In] and
then [Application].
(2) On the file selection window that appears, click the file you
want to install.
(3) Click [Open] and then go to step 14.
13
.Click the icon.
14
.Click [OK].
E-9
20031201
2Using the ClassPad Add-In Installer
15
.On your ClassPad, tap [OK].
16
.Click [File] – [Exit].
17
.Disconnect the ClassPad from your computer.
Other manuals for CLASSPAD
1
This manual suits for next models
1
Table of contents
Other Casio Software manuals
Casio
Casio Cassiopeia Pocket PC User manual
Casio
Casio Cassiopeia EM-500 User manual
Casio
Casio fx-9860G AU PLUS User manual
Casio
Casio FA-B30 User manual
Casio
Casio E-CON Quick start guide
Casio
Casio PHOTO LOADER User manual
Casio
Casio PHOTO LOADER - VER.3.0 FOR WINDOWS User manual
Casio
Casio CLASSPad300 - ClassPad 300 Touch-Screen Graphing Scientific... User manual
Casio
Casio PHOTO LOADER - VER.2.3 FOR WINDOWS User manual
Casio
Casio Program-Link FA-124 User manual
Casio
Casio Photohands User manual
Casio
Casio Mobile Address Book (Version 2.0US) User manual
Casio
Casio FX-CG10 User manual
Casio
Casio Cassiopeia EM-500 User manual
Casio
Casio Panorama Editor User manual
Casio
Casio Program-Link FA-124 User manual
Casio
Casio Physium Application User manual
Casio
Casio E-Con EA-200 User manual
Casio
Casio DP-8000 User manual
Casio
Casio Cassiopeia Pocket PC User manual
