Carrier Comfort Non-Programmable User manual
Comfort TM Non°Programmable
Owner's Manua_
This Comfort non-programmable thermostat is an easy to use model that provides
the most sought-after features for keeping your home comfortable. And with a slim
profile, it is designed to be as smart - and smart-looking - as any of the other
electronics in your home. Let this manual show you how easy it is to enjoy the
newest experience in home comfort.
@ ( E Designed and Assembled in the U.S.A.
NOTE: Read the entire instruction manual before starting the installation.
BUTTONIDENTIFICATION................................. 4
ON-SCREENINDICATORS..................................... 6
OPERATINGTHETHERMOSTAT
Settingthetemperaturesforheatingandcooling.................... 8
Usingthefan.................................................. 9
Usingemergencyheat(heatpumpsystemsonly).................. 10
Installingorreplacingthebatteries............................... 11
Usingthethermostattoturntheheatingandcoolingsystemoff ...... 14
Autochangeover.............................................. 14
ADVANCEDOPTIONS
Advancedoptionsdisplaycodeschart............................ 15
ChangingfromFahrenheittoCelsius............................ 16
Turningonthecontinuousbacklighting.......................... 17
Keypadlockout............................................... 18
Unlockingthekeypad........................................ 19
WHATIF...
Thebatteryiconisdisplayed.................................... 20
"Auxheaton"isdisplayed(heatpumpsystemsonly).............. 20
"Emheat"isdisplayed(heatpumpsystemsonly).................. 20
Thereisapoweroutage........................................ 21
Yougetasystemerrormessage................................. 21
COMMONTERMSANDWHERETOFINDTHEM
Autochangeover.............................................. 22
Auxiliaryheat(heatpumpsystemsonly)......................... 22
Backlighting................................................. 22
Emergencyheat(heatpumpsystemsonly)........................ 22
Mode........................................................ 22
WARRANTY.................................................. 23
o F
oC
fall actualtemp
88_,,_'
setat ?
a. FAN Selects whether the fan operates continuously (on) or only when
needed for heating or cooling (auto)
b. MODE Selects whether thermostat is set for heating, cooling, emergency
heat (heat pump system only), auto (heat and cool as needed), or off
c. UP Increases the temperature or adjusts the screen selection up when
setting advanced features
d. DOWN Decreases the temperature or adjusts the screen selection down
when setting advanced features
off
Em
heat
aux
heat
on
fan
auto
fan
on setat ---___ @
1. Fan mode - on or auto
2. System is in auxiliary (supplemental) mode
3. Current temperature
4. Thermostat mode is either off or using emergency heat
5. Fahrenheit
6. Keypad is locked (no padlock means unlocked)
7. Celsius
8. Battery strength indicator
9. Selected cooling set point; "on" indicates system is in cooling mode
10. Second stage of cooling is active
Setting the temperatures for heating and cooling
Your thermostat is installed with the heating set at 68 ° F and the cooling set at 72 ° F.
You can use these or change them so your home is as warm or as cool as you would
like it to be. These steps will hold the temperature where you set it.
1. To change the heating temperature, press the modebut- "_001
ton on the left until the screen says hoar. o
2. Press the up or down button located on the right side of
the display until you reach the desired temperature, o_:]
3. To change the cooling temperature, press the mode but- o
ton on the left until the screen says cool.
4. Press the up or down button located on the right side of the display until
you reach the desired temperature.
Using the fan
When the fan is on, it helps distribute air throughout your home for a more even
temperature in all spaces. You can set the thermostat so that the fan runs only
during your heating and cooling cycles (auto mode) or to run continuously.
The thermostat is set at the factory to run automatically as needed. Here's how to
change the setting so it runs continuously.
1. Press the fan button on the left. The display message will change from auto
fan to fan on.
2. To return the fan to auto mode, press the fan button °l I°]
again. You will see fan auto on the display, e
Other manuals for Comfort Non-Programmable
1
This manual suits for next models
3
Table of contents
Other Carrier Thermostat manuals
Carrier
Carrier TSTATCCPF701 Guide
Carrier
Carrier 33CS User manual
Carrier
Carrier Cor TP-WEM01-A User manual
Carrier
Carrier TP-WEM01 User manual
Carrier
Carrier 33CS420-01 User manual
Carrier
Carrier 53DFST2-NP User manual
Carrier
Carrier ComfortChoice Touch User manual
Carrier
Carrier Thermostat Assembly instructions
Carrier
Carrier TSTATCCPRF01 Guide
Carrier
Carrier TC-PBO01-BLK User manual
Carrier
Carrier Comfort Touch-n-Go User manual
Carrier
Carrier 49004DP21 Parts list manual
Carrier
Carrier DEBONAIR 33CS User manual
Carrier
Carrier Infinity SYSTXCCITW01 User manual
Carrier
Carrier TSTAT Instructions and recipes
Carrier
Carrier Debonair 33CS250-RC User manual
Carrier
Carrier Infinity Control Home Assembly instructions
Carrier
Carrier 33CS User manual
Carrier
Carrier 33CS400-01 User manual
Carrier
Carrier ComfortVu TB-24-HM Operating instructions
