Car-Interface CI-RL4-LR17 User manual

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

r.LiNK Video inserter

CI-RL4-LR17

Compatible with

Land Rover and Jaguar vehicles

with Incontrol Touch Pro Duo infotainment

and 10.2 inch monitor

Video-inserter for front- and rear-view camera

and two additional video inputs

Product features

Video-inserter for factory-infotainment systems

1 CVBS Input for rear-view camera

1 CVBS Input for front camera

2 CVBS Video-inputs for after-market Video sources (e.g. USB-Player, DVB-T2

Tuner)

Automatic switching to rear-view camera input on engagement of the reverse gear

Automatic front camera switching after reverse gear for 10 seconds

Activatable parking guide lines for rear-view camera (not available for all vehicles)

Video-in-motion (ONLY for connected video-sources)

Video-inputs NTSC compatible

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page2

Contents

1. Prior to installation

1.1. Delivery contents

1.2. Checking the compatibility of vehicle and accessories

1.3. Connection video interface

1.4. Settings of the 8 Dip switches (black)

1.4.1. Activating the front camera input (dip 1)

1.4.2. Enabling the interface’s video inputs (dip 2-3)

1.4.3. Rear-view camera setting (dip 5)

1.4.4. Activating the guide lines (dip6)

1.4.5. Activating the PDC (dip7)

1.5. Settings of the 4 Dip switches (CAN function –red)

2. Installation

2.1. Place of installation

2.2. Monitor removal –example Land Rover

2.3. Note for test run

2.4. Connection schema

2.5. Connection –picture signal cable

2.6. Analog power supply for the video interface

2.7. Power supply output

2.8. Connection - video-sources

2.8.1. Audio insertion

2.8.2. After-market front camera

2.8.3. After-market rear-view camera

2.8.3.1. Case 1: Interface receives the reverse gear signal

2.8.3.2. Case 2Interface does not receive the reverse gear signal

2.9. Connection - video-interface and external keypad

2.10. Picture settings

3. Interface operation

3.1. By factory touch screen

3.2. By keypad

4. Specifications

5. FAQ –Trouble Shooting-Interface functions

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page3

Legal Information

By law, watching moving pictures while driving is prohibited, the driver must not be

distracted. We do not accept any liability for material damage or personal injury resulting,

directly or indirectly, from installation or operation of this product. Apart from using this

product in an unmoved vehicle, it should only be used to display fixed menus or rear-view-

camera video when the vehicle is moving (for example the MP3 menu for DVD upgrades).

Changes/updates of the vehicle’s software can cause malfunctions of the interface. Up to

one year after purchase we offer free software-updates for our interfaces. To receive a free

update, the interface has to be sent in at own cost. Wages for de-and reinstallation and

other expenditures involved with the software-updates will not be refunded.

1. Prior to installation

Read the manual prior to installation. Technical knowledge is necessary for installation. The

video interface’s place of installation must be free of moisture and away from heat sources.

Before the final installation in the vehicle of the video sources, we recommend a test-run

to ensure the compatibility of vehicle and interface. Due to changes in the production of

the vehicle manufacturer there’s always a possibility of incompatibility.

1.1. Delivery contents

Take down the serial number of the interface and store this manual for support

purposes: ____________________

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page4

Requirements

Brand

Compatible vehicles

Compatible systems

Land Rover

Range Rover since model year 2018

Range Rover Sport since model year 2018

Range Rover Velar since model year 2017

Range Rover Evoque since model year 2020

Discovery 5

Incontrol Touch Pro Duo

with 10.2 inch 24:9 monitor (glossy)

and climate control panel via 2nd

touch monitor

XE since model year 2019

I-Pace since model year 2019

Limitations

Video only The interface inserts ONLY video signals into the infotainment. For

inserting Audio signals either the possibly existing factory audio-AUX-

input or a FM-modulator can be used. If 2 audio sources shall be

connected to the infotainment, an additional electronic is necessary to

switch them.

Factory rear-view camera Automatically switching-back from inserted video to factory rear-view

camera is only possible while the reverse gear is engaged. To delay the

switch-back an additional electronic part is required.

After market front camera The front camera will automatically be switched for 10 seconds after

disengaging the reverse gear. A manually front camera switching is

possible by external keypad.

PDC and guide lines If the video interface does not receive the required information from

the vehicle CAN-bus, neither guide-lines nor optical PDC display will be

supported.

Video input signal only NTSC compatible

1.2. Checking the compatibility of vehicle and accessories

Jaguar

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page5

1.3. Connection video interface

The video-interface converts the video signals of connected after-market sources in a factory

monitor compatible picture signal which is inserted in the factory monitor, by using separate

trigger options. Further it reads the vehicle’s digital signals out of the vehicle’s CAN-bus and

converts them for the video interface.

1.4. Settings of the 8 Dip switches (black)

Some settings have to be selected by the dip-switches on the

video interface.

Dip position down = ON and position up = OFF.

*The front camera will automatically be switched for 10 seconds after disengaging the

reverse gear.

See the following chapters for detailed information.

After each Dip-switch-change a power-reset of the Can-box has to be performed!

Dip

Function

ON (down)

OFF (up)

Front camera

enabled*

disabled

Power supply

output

(red wire)

+12V (max. 3A) when reverse gear

is engaged incl. 10 seconds delay

and +12V by manual switching to

front camera by keypad

+12V (max. 3A) ACC

CVBS AV1-input

enabled

disabled

CVBS AV2-input

enabled

disabled

No function

Set to OFF

Rear-view cam type

after-market

factory or none

Guide lines

enabled

disabled

PDC

enabled

disabled

No function

Set to OFF

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page6

1.4.1. Activating the front camera input (dip 1)

If set to ON, the interface switches for 10 seconds from the rear-view camera to the front

camera input after having disengaged the reverse gear. In addition, a manual switch-over to

the front camera input is possible via keypad (short press) from any image mode.

Description of the front camera power supply: see chapter “Power supply output”.

1.4.2. Enabling the interface’s video inputs (dip 2-3)

Only the enabled video inputs can be accessed when switching through the interface’s video

sources. It is recommended to enable only the required inputs, disabled inputs

will be skipped when switching through the video-interfaces inputs.

1.4.3. Rear-view camera setting (dip 5)

If set to OFF, the interface switches to factory picture while the reverse gear is engaged to

display factory rear-view camera.

If set to ON, the interface switches to its rear-view camera input „V4 Reverse “ while the

reverse gear is engaged.

1.4.4. Enabling the Guide lines (dip 6)

If set to ON, the interface is activated to show the guide lines for the rear-view camera while

the vehicle is in reverse mode (not available for all vehicles).

Note: Some vehicles have a different code on the CAN-bus which the video-interface is not

compatible with. If the interface does not completely communicate with the vehicle CAN

bus, the reverse gear guide-lines can`t be shown during the vehicle’s operation, even if they

in some vehicles once appear after having switched the system to powerless!

1.4.5. Activating the PDC (dip7)

If set to ON, the PDC car will be displayed on the screen and the park distance will be shown

by using the signals of the vehicle’s CAN-bus. If there is no communication between the

interface and the vehicle`s CAN-bus (several vehicles aren’t compatible), the park distance

can’t be shown. In this case, set dip7 to OFF.

Note: Dip 4 and 8 are out of function and have to be set to OFF!

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page7

1.5. Settings of the 4 Dip switches (CAN functions –red)

All 4 dip-switches of the video interface have no function for normal use

and have to be set to OFF.

Dip position “down”is ON and position up is OFF.

Navigation / system

Dip 1

Dip 2

Dip 3

Dip 4

Range Rover,

Range Rover Sport,

Discovery 5,

Range Rover Velar,

New Jaguar XE

OFF

Jaguar XF protocol

OFF

Jaguar XE 2016 protocol

OFF

If the CAN communication doesn’t succeed with the mentioned CAN positions, the other

CAN protocol can also be tried.

After each Dip-switch-change a power-reset of the video interface has to be performed!

2. Installation

To install the interface, first switch off the ignition and disconnect the vehicle’s battery.

Please read the owner`s manual of the car, regarding the battery`s disconnection! If

required, enable the car`s Sleep-mode (hibernation mode)

In case the sleep-mode does not succeed, the disconnection of the battery can be done

with a resistor lead.

If the necessary stabilized power supply for the interface is not taken directly from the

battery, the chosen connection has to be checked for being constantly stabile.

The interface needs a permanent 12V source!

2.1. Place of installation

The video interface is supposed to be installed at a suitable location behind the factory

monitor. This requires the vehicle’s centre console to be removed.

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page8

2.2. Monitor removal –example Land Rover

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page9

2.3. Note for test run

In vehicles in which the climate control system is operated by the touchscreen monitor, it is

necessary to have the monitor connected for an interface test run.

(Concerns e.g. all Land Rover and some other vehicles)

Version 10.08.2020 HW:CAM(V98)/(V31/ZK) CI-RL4-LR17

Page10

2.4. Connection schema

Table of contents

Other Car-Interface Automobile Accessories manuals

Car-Interface

Car-Interface CI-RL4-NAC12 User manual

Car-Interface

Car-Interface RL4-MIB92 User manual

Car-Interface

Car-Interface CI-RL3-LR16-8 User manual

Car-Interface

Car-Interface CI-UCON7-JEEP User manual

Car-Interface

Car-Interface TV-Free CI-TF-PCM30 User manual

Car-Interface

Car-Interface CI-RL3-MIB-TT User manual

Car-Interface

Car-Interface RL4-MM-R User manual

Car-Interface

Car-Interface CI-VL7-SY2 User manual

Car-Interface

Car-Interface TV-Free CI-TF-PCM21 User manual

Car-Interface

Car-Interface CI-RL3-C3D User manual

Car-Interface

Car-Interface CI-CARPLAY-CIC User manual

Car-Interface

Car-Interface CI-RL3-SC15 User manual

Car-Interface

Car-Interface TV-Free TF-NTG1 User manual

Car-Interface

Car-Interface CI-VL3-MBN51 User manual

Car-Interface

Car-Interface CI-RL2-MZD User manual

Car-Interface

Car-Interface CI-DAB-CAN1-SK User manual

Car-Interface

Car-Interface CI-V5-CIC-F-PNP User manual

Car-Interface

Car-Interface CI-RL3-CIC User manual

Car-Interface

Car-Interface CI-VL2-124SPY User manual

Car-Interface

Car-Interface CI-AUX-110 User manual

Car-Interface

Car-Interface CI-RL4-R40-E User manual

Car-Interface

Car-Interface r.LiNK CI-RL2-RLINK User manual

Car-Interface

Car-Interface CI-RL4-MIB92 User manual

Car-Interface

Car-Interface CI-RL-PCM3-TF User manual

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Yakima

Yakima 9MM STANDARD BIKE MOUNT instructions

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

Whispbar

Whispbar K085W Fitting instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual