Canon BW Printer Kit-G2 Operating and maintenance manual
Feb 21 2005
Installation Procedure
Canon BW
Printer Kit-G2
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and
repair of products. This manual covers all localities where the products are sold. For this reason, there may be
information in this manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.
When changes occur in applicable products or in the contents of this manual, Canon will release technical information
as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will
issue a new edition of this manual.
The following paragraph does not apply to any countries where such provisions are inconsistent with local law.
Trademarks
The product names and company names used in this manual are the registered trademarks of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied,
reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.
COPYRIGHT © 2001 CANON INC.
Printed in Japan
Caution
Use of this manual should be strictly supervised to avoid disclosure of confidential information.
Introduction
Symbols Used
This documentation uses the following symbols to indicate special information:
Symbol Description
Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning.
Indicates an item requiring care to avoid electric shocks.
Indicates an item requiring care to avoid combustion (fire).
Indicates an item prohibiting disassembly to avoid electric shocks or problems.
Indicates an item requiring disconnection of the power plug from the electric outlet.
Indicates an item intended to provide notes assisting the understanding of the topic in question.
Indicates an item of reference assisting the understanding of the topic in question.
Provides a description of a service mode.
Provides a description of the nature of an error indication.
Memo
REF.
Introduction
The following rules apply throughout this Service Manual:
1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical
and mechanical systems with reference to the timing of operation.
In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol ,
the arrow indicates the direction of the electric signal.
The expression "turn on the power" means flipping on the power switch, closing the front door, and closing the
delivery unit door, which results in supplying the machine with power.
2. In the digital circuits, '1'is used to indicate that the voltage level of a given signal is "High", while '0' is used to
indicate "Low".(The voltage value, however, differs from circuit to circuit.) In addition, the asterisk (*) as in
"DRMD*" indicates that the DRMD signal goes on when '0'.
In practically all cases, the internal mechanisms of a microprocessor cannot be checked in the field. Therefore, the
operations of the microprocessors used in the machines are not discussed: they are explained in terms of from
sensors to the input of the DC controller PCB and from the output of the DC controller PCB to the loads.
The descriptions in this Service Manual are subject to change without notice for product improvement or other
purposes, and major changes will be communicated in the form of Service Information bulletins.
All service persons are expected to have a good understanding of the contents of this Service Manual and all relevant
Service Information bulletins and be able to identify and isolate faults in the machine."
Contents
Contents
第1章 Installation Procedure
1.1 Points to Note About Installation .......................................................................................................................... 2
1.1.1Precaution for installation ............................................................................................................................... 2
1.2 Checking components ........................................................................................................................................... 3
1.2.1Checking the Contents..................................................................................................................................... 3
1.3 Installation procedure ............................................................................................................................................ 4
1.3.1Installation ....................................................................................................................................................... 4
Contents
Chapter 1 Installation
Procedure
Chapter 1
2
1.1 Points to Note About Installation
1.1.1 Precaution for installation 0009-2235
To install the Kit, you will need a separately available expansion RAM (256 MB).
This manual suits for next models
2
Table of contents
Other Canon Printer Accessories manuals
Canon
Canon Additional Finisher Tray-C1 User manual
Canon
Canon Finisher-Q1 User manual
Canon
Canon Puncher Unit-P1 User manual
Canon
Canon IMAGEPRESS C7010VPS User manual
Canon
Canon POD Deck Lite-C1 User manual
Canon
Canon Color iR Security Kit-A1P User manual
Canon
Canon imagePROGRAF RU-42 User manual
Canon
Canon iP4000 - PIXMA Photo Printer User manual
Canon
Canon Color Network Multi-PDL Printer Kit-C1 User manual
Canon
Canon NP-1500 User manual
Canon
Canon AG1 User manual
Canon
Canon DADF-P1 User manual
Canon
Canon Puncher Unit-L1 User manual
Canon
Canon DADF-P1 User manual
Canon
Canon imageRUNNER ADVANCE 6065 User manual
Canon
Canon imagePROGRAF RU-61 User manual
Canon
Canon PFI-101 User manual
Canon
Canon Paper Deck-V1 Service manual
Canon
Canon PIXMA MP980 Instruction Manual
Canon
Canon FAX-L350 User manual
