Canon EOS Rebel T4i User manual

Canon

Handy Features

® Disabling the Beeper (p.200)

® Card Reminder (p.200)

® Setting the Image Review Time (p.200)

® Setting the Auto Power-off Time (p.201)

® Adjusting the LCD Monitor Brightness (p.201)

® Creating and Selecting a Folder (p.202)

® File Numbering Methods (p.204)

® Setting Copyright Information (p.206)

® Auto Rotation of Vertical images (p.208)

® Checking Camera Settings (p.209)

® Reverting the Camera to the Default Settings (p.210)

® Preventing the LCD Monitor from Turning Off Automatically

(p.213)

® Changing the Shooting Settings Screen Color (p.213)

® Setting the Flash (p.214)

® Automatic Sensor Cleaning (p.219)

® Appending Dust Delete Data (p.220)

® Manual Sensor Cleaning (p.222)

Handy Features

_Disabling the Beeper

You can prevent the beeper from sounding when focus is achieved,

during self-timer operation, and during touch screen operations.

Under the [_1] tab, select [Beep], then

press < O >. Select [Disable], then

press < 0 >.

To silence the beeper only during touch

screen operations, select [Touch to g].

#;F=4_Card Reminder

This setting prevents shooting if there is no card in the camera.

Under the [_t_l] tab, select [Release

shutter without card], then press

<0 >. Select [Disable], then press

<(_>,

If there is no card inserted in the camera

and you press the shutter button, "Card"

will be displayed in the viewfinder, and

you cannot release the shutter.

Setting the |mage Review Time

You can set how long the image is displayed on the LCD monitor

immediately after capture. If [Off] is set, the image will not be displayed

immediately after image capture. If [Hold] is set, the image review will

be displayed up until the [Auto power off] time.

During image review, if you operate any camera controls such as

pressing the shutter button halfway, the image review will end.

Under the [m_'_1] tab, select [Image

review], then press <0 >. Select the

desired setting, then press <_)>.

200

Handy Features

_Setting the Auto Power'off Time

To save battery power, the camera turns off automatically after the set

time of idle operation elapses. You can set this auto power-off time.

When the camera has turned off due to auto power off, you can turn it

on again by pressing the shutter button halfway or pressing any of the

following buttons: <MENU>, <INFO.>, <[_]>, <r_>, etc.

If [Disable] is set, either turn off the camera or press the <INFO.>

button to turn off the LCD monitor to save battery power.

Even when [Disable] is set, if the camera is not used for 30 rein.,

the LCD monitor will turn off automatically. To turn on the LCD

monitor again, press the <INFO.> button.

Under the [_2] tab, select [Auto power

off], then press <0 >. Select the desired

setting, then press <0>.

Adjusting the LCD Monitor Brightness

You can adjust the brightness of the LCD monitor to make it easier to read.

Under the [_,2] tab, select [LCD

brightness], then press <_)>. With the

adjustment screen displayed, press the

<4_ > key to adjust the brightness, then

press <_)>.

When checking the exposure of an

image, set the LCD monitor brightness to

4 and prevent the ambient light from

affecting the reviewed image.

201

Handy Features

_Creating and Selecting aFolder

You can freely create and select the folder where the captured images

are to be saved.

This operation is optional since a folder will be created automatically for

saving captured images.

Creating a Folder

Select [Select folder].

®_Under the [_1] tab, select [Select

folder], then press <_)>.

Select [Create folder].

_ Select [Create folder], then press

<(_>,

,3Create a new folder.

¢_ Select [OK], then press <_)>.

_y,,A new folder with the folder number

increased by one is created.

202

Handy Features

Selecting a Folder

Lowest file number

Number of images

in folder

Folder name

Highest file number

®_With the folder selection screen

displayed, select a folder and press

<(_>.

_y,,The folder where the captured

images will be saved is selected.

_ Subsequent captured images will be

recorded into the selected folder.

About Folders

As with "100CANON" for example, the folder name starts with three digits

(folder number) followed by five alphanumeric characters. A folder can contain

up to 9999 images (file number 000! - 9999). When a folder becomes full. a

new folder with the folder number increased by one is created automatically.

Also. if manual reset %205) is executed, a new folder will be created

automatically. Folders numbered from 100 to 999 can be created.

Creating Folders with aPersonal Computer

With the card open on the screen, create a new folder named "DClM". Open

the DCIM folder and create as many folders as necessary to save and

organize your images. The folder name must follow the format "10OABC_D".

The first three digits are the folder number, from 100 to 999. The next five

characters can be any combination of upper- and lower-case letters from A to

Z. numerals, and tile underscore "_", The space cannot be used. Also note

that tv ,o folder names cannot share the same three-digit folder number (for

example,"lOOABC_D"and"lOOW_XYZ" even if the other five characters in

each name are different.

203

HandyFeatures

_File Numbering Methods

The image flies wiii be numbered from 0001 to 9999 in the order the

images are taken, then saved in a folder. You can change how the file

number is assigned.

The file number wiii appear on your computer in this format:

llVlG O001.JPG.

Under the [_1] tab, select [File

numbering], then press <_)>. The

available settings are described below.

Select the option, then press <_)>.

®_[Continuous]: The file numbering continues in sequence even

after you replace the card or create a folder.

Even after you replace the card or create a new folder, the file

numbering continues in sequence up to 9999. This is convenient

when you want to save images numbered anywhere between 0001

to 9999 in multiple cards or folders into one folder in your personal

computer.

If the replacement card or existing folder already contains images

recorded previously, the file numbering of the new images may

continue from the file numbering of the existing images in the card or

folder. If you want to use continuous file numbering, it is

recommended that you use a newly-formatted card each time.

File numbering after

replacing the card

Next sequential file number

File numberingafter

creating afolder

2O4

HandyFeatures

®_[Auto reset]: The file numbering restarts from 0001 each time

the card is replaced or a new folder is created.

When you replace the card or create a folder, the file numbering

restarts from 0001 for the new images saved. This is convenient if

you want to organize images according to cards or folders.

However, if the replacement card or existing folder already contains

images recorded previously, the file numbering of the new images

may continue from the file numbering of the existing images in the

card or folder. If you want to save images with the file numbering

starting from 0001, use anewly formatted card each time.

File numberingafter

replacingthe card

File numbering is reset

File numbering after

creating a folder

Card:!

®_[Manual reset]: To reset the file numbering to 0001 manually or

to start from file number 0001 in a new folder.

When you reset the file numbering manually, a new folder is created

automatically and the file numbering of images saved to that folder

starts from 0001.

This is convenient if you want to use different folders for the images

taken yesterday and the ones taken today, for example. After the

manual reset, the file numbering returns to continuous or auto reset.

(There wiii be no Manual reset confirmation screen.)

If the file number in folder 999 leaches 99991 shooting wil! not be POssible

even if the card sti!! has storage capacity. The LCD monitor wil! display a

message te!!ing you to replace the Card: Rep!ace !t wit h a

For both 3PEG and RAW imagesl the file name _ill start with "IM G_" Movie

file narnes will start with 11MV!_'::The extension wi!! be tLJPG" for JPEG

images, t!,CRZ: for RAW images, and ". MOVI! for movies,

2O5

Handy Features

Setting Copyright Information*

When you set the copyright information, it wiii be appended to the

image as Exif information.

_Select [Copyright information].

® Under the [_4] tab, select [Copyright

information], then press <_)>.

i_ Select the option to be set.

® Select [Enter author's name] or

[Enter copyright details], then press

<(_>,

S+The text entry screen will appear.

® Select [Display copyright info.] to

check the copyright information

currently set.

® Select [Delete copyright

information] to delete the copyright

information currently set.

,_ Enter text.

® Refer to "Text Entry Procedure" on

the next page and enter the copyright

information.

® Enter up to 63 alphanumeric

characters and symbols.

_,_ Exit the setting.

® After entering the text, press the

<MENU> button to exit.

® On the confirmation dialog, select

[OK] and press <_)>.

206

Other manuals for EOS Rebel T4i

This manual suits for next models

Table of contents

Other Canon Digital Camera manuals

Canon

Canon EOS Rebel SL1 18-55mm IS STM Kit User manual

Canon

Canon POWERSHOT SD870IS User manual

Canon

Canon PowerShot S90 User manual

Canon

Canon EOS 650D User manual

Canon

Canon PowerShot 350 User manual

Canon

Canon EOS Rebel SL2 EOS 200D User manual

Canon

Canon Powershot S60 User manual

Canon

Canon PowerShot G9 User manual

Canon

Canon RebelT3i EOS 600D User manual

Canon

Canon PowerShot A450 User manual

Canon

Canon Sure shot 80 tele User manual

Canon

Canon PowerShot A530 Operating and maintenance manual

Canon

Canon PowerShot SD990 IS Digital ELPH User manual

Canon

Canon POWERSHOT A610 User manual

Canon

Canon EOS 60D User manual

Canon

Canon EOS-1D C User manual

Canon

Canon PowerShot A580 User manual

Canon

Canon AE-1 User manual

Canon

Canon Powershot SD1300 IS User manual

Canon

Canon PowerShot S50 Instruction Manual

Canon

Canon CR-2 PLUS AF User manual

Canon

Canon EOS 5D Mark III User manual

Canon

Canon CDI-E075-010 User manual

Canon

Canon PowerShot A400 Mounting instructions

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Nikon

Nikon Coolpix 100 user manual