Do not place clothing or other flammable material on or near the heater.
Keep curtains, clothing, furniture and other flammable materials at least
900mm from front and sides of the heater.
At the owners discretion curtain clearances can be less than 900mm as
long as they are restrained from the front, top and sides of the heater.
The manufacturer takes no responsibility if curtain clearance is less than
900mm and not restrained.
For full safety warning information, Refer to Heater User Instructions.
Page 3.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for safety. Children should be supervised to ensure that
they do not play with the appliance.
Features of your thermostat model heater:
If the controller is turned on and there is a requirement for heating, the
heater will start up on Low Fire and Low Fan and operate for approximately
3 minutes.
The heater will then go to your preset desired temperature functions on
the remote controller
Once the selected room temperature has been reached, the heater will
go to Low Fire and Low Fan.
The full description on the operation of the heater is described in more
detail in the following section.
This heater features a safety interlock mode to prevent accidental or
inappropriate activation of the hand held remote control unit. It requires
both “ and “ buttons be pressed at the same time to turn on the
controller.
PWR” OK”
Page 16.
Function Action Page
Switch on/off
Change
between
manual and
automatic
mode.
Increase /
decrease
temperature.
Set the clock
and day of
the week.
Program the
thermostat
Press and release ‘ button.A/M ‘
Press and release button.‘UP ‘ or ‘DOWN ‘
With the thermostat off, press and hold the ‘ ’
button until the time, hour and flash.
Press and release the ‘ or ‘ buttons
to increase or decrease the hour setting.
Press and hold for the hour to increase or
decrease 1 hour every 0.5 seconds.
Press ‘ and set the minute setting similarly.
Press ‘ and press and release the ‘ ’ or
‘ ’ buttons to change the day of the week.
T
AM/PM
UP ’ DOWN ’
OK ’
OK ’ UP
DOWN
With the thermostat off, press and hold
the ‘ ’ button. Program 1 can now be set.
To select Monday press ‘ , or press and
release ‘ or ‘ to change the day of
the week, or to switch to the weekday or
weekend setting.
To set the period starting time, set the hour and
minute setting similarly to setting the clock.
Press ‘ . Press and release the ‘ or
‘ button to increase or decrease the
temperature setting by 1°C.
Press ‘ ’. Program 2 can now be set.
Repeat the programming process for the 4
periods.
P
OK ’
UP ’ DOWN ’
OK ’ UP ’
DOWN’
OK
8
9
9
8
10
Press ‘ & buttons at same time
(then release)
PWR’ ‘OK’
SAFETY WARNINGS Quick reference table
