Canarm DUAL MOUNT series User manual

DUAL MOUNT SERIES

QUESTIONS OR CONCERNS CONTACT AT:

1-800-265-1833 (English)

1-800-567-2513 (French)

Monday through Friday 8:00 a.m. to 5:00 p.m. E.S.T.

2157 Parkedale Ave.,

Brockville, Ontario

K6V 5V6

PH: (613) 342-5424

FX: (613) 342-8437

2555 Rue Bernard

Lefebvre, Laval, Quebec

H7C 0A5

PH: (450) 665-2535

FX: (450) 665-0910

NOTE: FOR OPTIMUM QUIETNESS, FULLY ASSEMBLE FAN AND RUN 24 HOURS

TOOLS AND MATERIALS REQUIRED

- Philips Screw Driver

- Blade Screw Driver

- Step Ladder

- Wire Cutters

- Wiring supplies as required by electrical code.

Pg. #12

“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”

“READ ALL INSTRUCTIONS”

“IMPORTANT SAFETY

INSTRUCTIONS”

“SAVE THESE INSTRUCTIONS”

INSTALLATION AND WIRING TO BE IN ACCORDANCE WITH CEC,

NEC, LOCAL ELECTRICAL CODES and ANSI/NFPA 70.

Consult a qualified electrician if you are not familiar with wiring.

CF-18

LED

12/16

“Thank you” for purchasing our product. It is our policy to furnish you with high quality

products at a fair price. With proper installation your fan should provide you with years of

money saving comfort.

This fan is guaranteed to be free from defects in workmanship and Material for a period

of twenty (20) years from date of purchase. Within the first (1) year from date of purchase any

defective product should be returned to your RETAIL OUTLET along with proof of purchase.

For the balance of the warranty, nineteen (19) years, the MOTOR WINDINGS ONLY shall be

free of defects. We will correct such defects or replace the motor assembly at our option if the

product is returned, FREIGHT PREPAID, to us. The returned fan must be accompanied by

your proof of purchase and a cheque for $20.00 for handling and labour charges.

All costs of removing and re-installing the product are YOUR RESPONSIBILITY damage

to any part assuch by accident, misuse, improper installation or by affixing any accessories IS

NOT covered by this warranty. As a result of varying climatic conditions in our area this

warranty does not cover any changes in finishes, including rusting, pitting, corroding, tarnishing

or peeling.

WARRANTY VOID: In cases of alteration, abuse, installation not in accordance with

instructions or REMOVAL Of the c.S.A. Sticker.

20 YEAR LIMITED WARRANTY

11/16

Pg. #11

Pg.

WARNING

reduce

the

risk

fire

electrical

shock, ONLY use model CQ002

remote control for optional remote control adaptability.

reduce

the

risk

personal

injury DO

NOT bend

the

blade

brackets

when

installing

the

brackets,

balancing

the

blades

cleaning

the

fan. Also,

NOT insert

foreign

objects

between

rotating

fan

blades.

Mount

with

the

lowest

moving

parts

least

2.10

Meters

Feet)

above

floor

grade

level.

-DO

NOT operate

reversing

switch

while

fan

blades

are

motion. Fan

must

turned

off

and

rotating

blades

stopped,

reverse

chain

pulled,

the

speed

chain

pulled

again

start

the

opposite

direction.

INSTRUCTIONS

ceiling

fan

has

completely

internal

switching

system

for

total

operation

way of

pull

chains.

fan/light

combination,

pull

chains

will

exist: One

for

light,

on and

off. The

second

for

fan

speeds. This

will

marked

(SPEED)

the

fan

switch

housing.

1st

Pull

will

give

fan

High

Speed

2nd

Pull

will

give

fan

Medium

Speed

3rd

Pull

will

give

fan

Low

Speed

4th

Pull

will

Shut

Fan

Off

The

third

pull

chain

for

Forward/Reverse#( Note:

Some

models

come

with

slide

switch

instead

pull

chain).

This

setting

would

usually

changed

twice

per

year. Downdraft

summer

create

wind

chill

give

cooling

effect.

Updraft

winter

circulate

the

hot

stratified

air

off

the

ceiling

and

back

down

the

floor

without

creating

wind

chill.

SAFETY PRECAUTIONS

1. Turn off power at main electrical service box before starting installation.

2. Electrical connections must comply with local code ordinances, national

electrical codes, CEC, NEC and ANSI/NFPA 70.

3. Make sure the installation site you choose allows the fan blades to rotate

freely without any obstructions.

4. When mounting the fan on a ceiling outlet box, Use an approved (CSA for

Canada and UL for U.S.) ceiling fan box marked "FOR FAN SUPPORT".

5. WARNING: To reduce the risk of fire, electric shock, or personal injury,

mount fan only to an outlet box marked acceptable for fan support and use

mounting screws provided with the outlet box. Most outlet boxes commonly

used for the support of lighting fixtures are not acceptable for fan support

and may need to be replaced. Consult a qualified electrician if in doubt.

Ensure the outlet box is securely installed in place such that it is able to

support at least the fan weight.

three

6.Total Fan Weight For Reference: 42"approximate 7.5 kgs(16.53lbs),

52"approximate 9.0 kgs(19.84lbs).

TROUBLESHOOTING

TROUBLE SUGGESTIONS

- Check fuses and circuit breakers.

1. Fan will not start - Check wiring connections to fan.

- Check wiring connections in switch housing.

CAUTION: Turn power off for last two items.

2. Fan sounds noisy - Check to make sure that all screws in motor housing are snug.

- Check to make sure that blade bracket screws are tight.

Check

make

sure

that

marrettes

switch

housing

are

not

rattling

against

wall

switch

housing.

fan

has

light

kit

make

sure

switch

housing

screws

and

set

screws

are

tight.

Some

fan

motors

are

sensitive

signals

from

solid

state

variable

controls. If

solid

state

controller

used,

change

alternative

control. (See

representative

for

list

available

controls.)

Allow a

hour

break

period

eliminate

most noises.

3. Fan

wobbles -

Check

that

all

blades

are

screwed

firmly

into

blade brackets.

or shakes

excessively.

Check

that

blade

brackets

are

secured

firmly

to motor.

Check

distance

from

tip

blades

ceiling. Gently bend

down

the

blade

brackets

until

all

distances are

the

same.

Check

distance

between

blade

tip

blade

tip.

All

measurements

should

equal. Loosen

blade

screws

and

position

blade

until

even

then

re-tighten.

Check

that

the

downrod

hemisphere

notch

is engaged

canopy.

Check

make

sure

that

jam

screws

downrod

are tightened.

Make

sure

canopy

and

mounting

bracket

are

tightened

securely

wooden

joist.

Make

sure

warpage

has

not

occurred

wooden

blades. If

so,

contact

the

customer

service department

for

replacement

parts.

Pg. #3

Pg. #10

1. Wooden Joist

2. Approved (CSA for Canada

and UL for U.S.) ceiling fan box

(not provided)

3. Ceiling

4. J-Hook

5. Rubber Gasket

6. Screws & Lock Washers

(set of 4)

7. Mounting Bracket c/w Ground

Wire

8. Outlet Box Screws (not provided)

9. Rubber Ring (optional)

10. Lock Pin

11. Hemisphere Jam Screw

12. Hemisphere

13. Upper Motor Housing Screws

& Lock Washers (set of 3 or 4)

14. Downrod c/w Ground Wire

15. Ceiling Canopy

16. Rubber Bushing (optional)

17. Bolt

18. Motor Assembly

19. Jam Screws

20. Cotter Pin

21. Nut (optional)

22. Lock Washer (optional)

23. Flat Washer (optional)

24. Hex Nut

32. Blade Bracket Screws

25. Flat Washer

26. Fibre Washer

27. Fibre Bracket Gasket

28. Blade

29. Blade Bracket

30. Lock Washer

31. Motor Screw

With Downrod Without Downrod

7. 8.

10.

11.

12.

13.

14.

15.

17.

18.

15.

16.

18.

19.

20.

21.

22.

23.

25.

26.

28.

25.

26.

28.

Cast Blade

Brackets

Stamped Blade

Brackets

ASSEMBLY DRAWING

27.

29.

30.

31.

32.

24.

30.

32.

Fig. 1

NOTE: Electrical diagrams are for reference only. Light kits that are not packed with the fan must be CSA/UL

Listed and marked approval for use with the model fan you are installing. Switches must be CSA/UL

General Use witches. Refer to the instructions packaged with the light kits and switches for proper

assembly.

WARNING: Check all connections, set screws and screws are securely tightened

before the next step.

BPERMANENTLY ATTACHED LIGHT

- Loosen thumb screws on light.

ADETACHABLE LIGHT KITS

Red or Blue

Wires

Light Kit

Screws

Light Kit

Black Wire

Switch

Housing

White Wires

Lockwasher

White Wire

Screws

Thumb

Screws

Nuts

Chain

Glass Bowl

Lock washer

- Remove 2 clips (optional) and nuts. Loosen third clip (optional) and nut.

Fig.10e

Red or Blue

Wires

Black or

Blue Wires

Red or Blue

Wires

Light Kit

Screws

Light Kit

Black Wire

Switch

Housing

White Wires

Lockwasher

White Wire

Screws

Clips

Chain

Glass

Lock washer

Fig.10f

Red or Blue

Wires

Black or

Blue Wires

Nuts

- Align slots in glass bowl with nipples on

fixture. Slide glass into loosened clip.

Assemble the other 2 clips to the fixture

and then tighten all three nuts in place.

- Connect tassels to switches feeding

chains through nuts on light kit.

NOTE: Pull chain switches are available for some models.

- Loosen thumb screws on light.

- Place shade on light and secure with

thumb screws, finger tight.

- Connect tassels to switches feeding

chains through nuts on light kit.

Fig.10g

- Place shade on light and secure

with thumb screws, finger tight.

Screw

Glass

Pg. #4

NOTE: All set screws must be checked and

retightened where necessary,before and after

installation.

MOUNTING OPTION

CAUTION

Upper Jam

Screw

Upper Jam

Screw

Do not loosen two lower jam screws

Bolt Yolk Yolk

Nut

Flat Washer

Lock Washer

Cotter

INST

INSTALLA

ALLATION

TION

DOWNROD MOUNT

- Using a Philips screwdriver loosen the two upper jam screws on the yoke.

- Position downrod inside canopy.

- Route wires exiting yoke on motor through ceiling canopy and downrod.

- Position downrod/canopy into yoke and align holes in yoke and downrod.

- Insert bolt through hole in yoke and downrod. “Be careful not to damage

or cut the fan wires.”

- Tighten flat washer, lock washer, and nut and bolt (not includedon some

models). Secure with cotter pin through hole in the end of the bolt.

- Secure downrod in position by tightening upper jam screws.

FLUSH MOUNT

- Remove the yoke screws and lockwashers which correspond to the holes

- Optional for some models -Remove rubber ring from canopy (see fig. 2d)

in the canopy.

- Position canopy over the holes on motor and secure with the same screws

and lockwashers removed in the previous step. Ensure to place the rubber bushing

between the canopy and motor.

Motor

Rubber

Bushing

Canopy

Yoke Screws

& Washers

Motor

Canopy

Yoke Screws

& Washers

Rubber

Bushing

Fig. 2a Fig. 2b

Fig. 2c

Fig. 2e Fig. 2f

LIGHT KITS (Optional in some fans)

DETACHABLE LIGHT KITS

- Remove light kit screws and washers.

- Connect polarized connectors of light kit to corresponding connectors

found in switch housing.

WARNING: BE SURE TO TURN OFF POWER BEFORE INSTALLING

- Carefully tuck electrical wires back into switch housing, align light kit with

switch housing and secure with three light kit screws and washers.

- Place shades on light kit and secure with either screws,

for pop-off style shades.(See Fig.10a,Fig.10b,Fig.10c,Fig.10d).

Motor

Red, Blue or

Black Wires

Red, Blue or

Black Wires

Light Kit

Screws

Light Kit

Switch Housing

White Wires

Lock washer

Fig. 10a

Shade

Thumb

Screw

Light Kit

Fig. 10c

Glass

Fixture Socket

Spinner Nut

Tool

Light Kit Screw

Light Kit

Switch Housing Switch Housing

Fig. 10d

Tool

Spinner Nut

Light Kit

White wire White wire

Red or Blue Wires

Black or Blue Wires

Pg. #9

Fibre washer

(Optional)

Canopy

Rubber

ring Fig. 2d

Optional for

some models

for your model)

(Refer to one of the following light kits

finger tight,spinner nut or push and turn

Fig. 10b

Pg. #8 Pg. #5

INSTALL MOUNTING BRACKET

Canopy

J-Hook

Ceiling

- Install J-Hook through centre of outlet box and into the wooden joist.

- Secure mounting bracket and rubber gaskets to outlet box.

- Hang the safety cable onto the J-hook.

- Hang fan on mounting bracket.

WARNING: To Reduce The Risk Of Fi re, Electric Shock, Or Personal

Injury, Mount To UL/CSA Listed Outlet Box Marked Acceptable for

Fan Suppo rt And Use Mounting Sc rews Provided With The Outlet Box.

J- Hook

Safety

Cable

Fig. 3a Fig. 3b

Outlet box Screws

(not provided)

CAUTION

SEE SAFETY PRECAUTIONS ON

PG. #2 BEFORE WIRING

Green Wire - GROUND

Black Wire (Fan) - POWER

White Wire (Fan) - COMMON

Red or Blue Wire (Light Kit) - POWER

ELECTRICAL HOOK UP

- There are several different wiring combinations that can be used in

controlling your ceiling fan to meet your specific requirements. Should

the following method not meet your requirements call or visit your nearest

distributor for a full list of fan accessories.

After making the wire connections, ensure the wires should be spread

apart with the grounded conductor and the equipment-grounding

conductor on one side of the outlet box and the ungrounded conductor

on the other side of the outlet box.

Ensure the splices after being made should be turned upward and

pushed carefully up into the outlet box.

MOUNT BLADE BRACKETS TO BLADES

Motor Screw

Motor

Lock Washer

Fibre Bracket Gasket

Cast Blade Brackets

- Place blade bracket screw through flat

washer, fibre washer and blade.

- Align with corresponding hole in

blade bracket.

- Repeat with (2) remaining screws

and tighten.

Stamped Blade Brackets

- Place blade bracket screw through

hole in blade bracket.

- Align with corresponding hole in blade

bracket.

- Place fibre washer and flat washer

over blade bracket screw and secure

with hex nut.

- Repeat with (2) remaining screws and

tighten.

MOUNTING BLADES TO MOTOR

- Take out hardware containing motor screws, lock washers and gaskets.

- Place lock washers over motor screws, position motor screws in blade

brackets, place fibre bracket gaskets over screws and secure to motor.

Make sure all screws are tightened securely.

Hex Nut

Blade

Bracket

Blade Bracket

Screw

Fibre Washer

Flat Washer

Lock Washer

Remove Rubber Stops (optional)

NOTE: Fan comes with three rubber stops (optional on some models)

on motor for shipping purposes only. Remove stops before running motor

or installing blades to motor.

Fig. 9a Fig. 9b

Fig. 8b

Blade Bracket Screw

Fibre Washer

Flat Washer

Blade Bracket

Fig. 8a

Blade Bracket Screw

- Take out hardware package. - Take out hardware package.

Wood

Joist

Outlet Box

Rubber

Gasket

Mounting

Bracket

Pg. #6 Pg. #7

MOUNTING FAN ASSEMBLY

- Place two screws and washers on mounting plate (marked B on diagram)

which correspond with slots in canopy. Screw in two turns.

- Position canopy to mounting plate aligning slots to screws (marked B on

diagram) then turn to lock.

- Position and tighten the two screws and washers (marked A on diagram)

then tighten the two screws (marked B on diagram).

ENGAGE HEMISPHERE (Downrod Mount Only)

- Carefully rotate fan assembly until groove in hemisphere locks over tab of

canopy assembly.

NOTE: When installing fan on sloped ceiling, make sure tab on hanger bracket

faces towards the top of the slope. Depending on the slope, a longer

downrod may be required to prevent fan blades from hitting the ceiling.

WARNING: Failure to seat tab in groove could cause damage to

electrical wires and possible shock or fire hazard.

ELECTRICAL HOOK UP (Continued)

CONNECTING BLACK, WHITE, AND (RED OR BLUE) WIRES

NOTE: Once wires are connected, carefully tuck wires and marrettes into the

outlet box making sure that the wires are clear of the hemisphere

and downrod when positioned in mounting bracket

(Downrod Mount Only).

Fig. 6

- Connect white wire from outlet box to white

wire from fan using marret (not supplied).

- Connect black wire from outlet box to black

wire from fan plus (red or blue wire) using

a marret.

NOTE: A red or blue wire would be power

for a light kit if applicable.

Black Wire

White Wire

ELECTRICAL HOOK UP

CONNECTING THE (GREEN) GROUND WIRE

- Connect ground wire from outlet box

to green wire from mounting bracket

and downrod using a

(not supplied).

NOTE: Once ground wires are connected, carefully tuck wires and into the

outlet box making sure that the wires are clear of the hemisphere and

downrod when positioned in mounting bracket (Downrod Mount Only).

- Connect ground wire from outlet box

to green wire from mounting bracket

using a (not supplied).

DOWNROD MOUNT FLUSH MOUNT

Fig. 5

Fig. 4

Marette

marette marette

marette

Downrod

erehpsimeH Groove

(A)

(B)

Washers

(A)

Fig.7b

Fig.7a

Red or Blue

Wire

This manual suits for next models

Table of contents

Other Canarm Fan manuals

Canarm

Canarm SD08 User manual

Canarm

Canarm HVR User manual

Canarm

Canarm 3000M Series User manual

Canarm

Canarm PALISADE User manual

Canarm

Canarm AgSystems FGC Series Parts list manual

Canarm

Canarm DUAL MOUNT SERIES User manual

Canarm

Canarm DUAL MOUNT SERIES User manual

Canarm

Canarm AgSystems PRF36 User manual

Canarm

Canarm 8LEC Series User manual

Canarm

Canarm CA20AG-FVD1 User manual

Canarm

Canarm CF1770 User manual

Canarm

Canarm PACIFIC WIND User manual

Canarm

Canarm PENTA-LITE 6LEC Series User manual

Canarm

Canarm AXIS User manual

Canarm

Canarm HUGGER STYLE Series User manual

Canarm

Canarm BPT18-34A-1 Parts list manual

Canarm

Canarm FGI18 User manual

Canarm

Canarm IDL series Parts list manual

Canarm

Canarm CITIE User manual

Canarm

Canarm PLF09 User manual

Canarm

Canarm AgSystems PF52 User manual

Canarm

Canarm Tri-Lite 3LMPEC User manual

Canarm

Canarm 3LEC Series User manual

Canarm

Canarm BPT12-13H Parts list manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual