Cameo CLPST64Q8W User manual
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘USO
STUDIO PAR 64 CAN
18 X 8W QUAD COLOUR LED PAR CAN RGBW CLPST64Q8W
2 3
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
Thank you for choosing Cameo Lights!
We have designed this product to give you reliable operation over many years.
Please, take a few moments to read these instructions carefully, as we want you to enjoy your new Cameo Lights
products quickly and to the fullest.
Further information about Cameo Lights check our website WWW.CAMEOLIGHT.COM
2 3
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
FRANCAIS FRANCAIS
FRANCAIS FRANCAIS
DEUTSCH
ENGLISH
STUDIO PAR 64 CAN
18 X 8W QUAD COLOUR LED PAR CAN RGBW CLPST64Q8W
4 5
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
PREVENTIVE MEASURES:
1. Please read this information carefully.
2. Keep all information and instructions in a safe place.
3. Please follow the instructions.
4. Please observe all warnings. Don‘t remove safety instructions or any other information located on the device.
5. Use the device only in the intended manner.
6. Use only stable and appropriate stands and/or mounts when the device is permanently installed. Make certain
that wall brackets are firmly secured. Make certain that the unit is installed securely and cannot fall down.
7. When installing please observe the corresponding safety standards for your country.
8. Do not install the device near radiators, heat accumulators, ovens or other sources of heat. Make certain that
the device is always installed so that is cooled sufficiently and cannot overheat.
9. Do not place open sources of ignition, e.g., burning candles, on the device.
10. Do not cover ventilation slots.
11. Do not operate the device in the immediate vicinity of water. Do not expose this equipment to combustible
materials, liquids or gases.
12. Please make certain that dripping or splashing water cannot get inside the device. Do not put objects filled
with fluids, such as vases or drinking vessels, on top of the device.
13. Make certain that objects cannot fall into the device.
14. Use the device only with accessories with which the manufacturer intends the device to be used.
15. CAUTION: If this device has a mains connector equipped with protective earth, it must be connected to a
mains socket with a protective ground connection. Never disable the function of the protective ground connection
of the included power cord.
16. Do not turn on the device immediately if it was exposed to strong temperature fluctuations (for example after
transportation). Moisture and condensation may damage the device. Leave the device switched off until it has
reached room temperature.
17. Do not open the device and do not make any changes to the device.
18. Before connecting to mains power, make certain that the mains voltage and the mains frequency are the
same as the operating values of the device (see type label). If the device is equipped with a supply voltage selec-
tor switch, make certain that the values of the device match the values of the mains power before connecting.
If the plug on the included cord does not fit your mains outlet, contact your electrician.
19. Make certain that the power cord is not stepped on. Protect the power cord against pinching, especially at
the device plug and the power plug.
20. In order to prevent damage or accidents, for example, due to tripping hazards, check all connections once
you have connected the device.
21. When connecting the device, make certain that the power plug remains readily accessible.
Always pull out the power plug when the device is not in use or when you clean the device. Disconnect the
power cord by pulling the plug not the cable.
22. Avoid switching the device on and off at short intervals, because it may shorten the durability of the device.
23. IMPORTANT: Replace fuse only by fuse of same type and rating! If fuse blows repeatedly please contact
authorized service center!
24. In order to disconnect the device completely from the mains voltage, the power plug must be unplugged.
25. If your device is equipped with a Volex power connector, the matching Volex device plug must be unlocked
in order to disconnect it. This also means that a tug on the power cord can pull the device out of place, thus
causing personal injuries and/or property damage. Thus please make certain to route your cables carefully.
4 5
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
FRANCAIS FRANCAIS
FRANCAIS FRANCAIS
DEUTSCH
ENGLISH
26. If there is a risk of lightning strike or during extended periods of disuse, unplug the power plug.
27. During transport, make certain that the equipment being transported cannot fall down and possibly
cause personal injuries and/or property damage.
28. If your device no longer works properly, if it has been exposed to liquids or an object has fallen inside it or
if it has been damaged in some other manner, turn the device off immediately und unplug the power plug. This
device should be repaired only by authorized experts.
29. Use only a dry cloth to clean the device.
30. Comply with all of the disposal laws that are applicable in your country. During disposal, please separate
plastic and paper/cardboard.
31. Plastic bags must be kept out of the reach of children.
OPERATING DETERMINATIONS
If this equipment is operated in any other way, than those described in this manual, the product may suffer
damage and the warranty becomes void.
Incorrect operation may lead to danger e.g.: short-circuit, burns, electric shocks, lamp failure etc.
Do not endanger your own safety and the safety of others!
Incorrect installation or use can cause serious damage to people and property.
WARNING!
1. Do not look into the beam from a distance of less than 40 cm (16 inches).
2. Do not stare into the beam for extended periods at a short distance.
3. Do not view the beam directly with optical instruments such as magnifiers.
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer
servicing to qualified personnel.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user
to the presence of uninsulated “dangerous voltage” within the product´s enclosure that may be of
sufficient magnitude to constitute a risk to persons.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
6 7
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
INTRODUCTION:
CONTROL FEATURES
18 X 8W QUAD COLOUR LED PAR CAN RGBW
(CLPST64Q8W)
• 2 CH, 3 CH1, 3 CH2, 4 CH, 7 CH DMX Modes
• Individual control of Red, Green, Blue and White colour (RGBW in 1)
FEATURES
• 18 Ultra bright 8W QUAD colour LEDs
• Sound control via internal microphone
• Colour jumping speed and strobe effect adjustable via control panel
• Multi-colour changes
• Master/Slave functions
• Rugged compact housing
• Power consumption: 170 W
• Beam angle 25°
• Long life LEDs
OPERATING INSTRUCTIONS
The Cameo LED CAN is a DMX-512 controllable, colour mixing spot made up of high efciency and super bright
LED’s. There are four colours (red, green, blue and white) whose intensity can be controlled individually allowing
the creation of an unlimited range of colours. The Cameo LED light will operate in Stand-alone, Master/Slave,
Sound controlled and via DMX-512 control.
6 7
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
FRANCAIS FRANCAIS
FRANCAIS FRANCAIS
DEUTSCH
ENGLISH
POWER
110V-250V AC
50Hz~60Hz
F2A / 250V
BACK PANEL:
8 9
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
MODE SELECTION:
STATIC COLOUR MODE
Press the MODE button repeatedly if necessary to select the Static Colour
Mode (CXXX), then press the ENTER button (2. digit blinks) to choose one of
the static colours or the strobe function by using the UP and DOWN buttons.
C1 represents Red, C2 = Green, C3 = Blue, C4 = White and CF = Strobe.
Press ENTER again (3. and 4. digit blink) to adjust the brightness of the pre-
selected colour (CX00 - CX99) and the strobe speed (CF00 - CF99) by using
the UP and DOWN buttons. Press ENTER to conrm.
Examples: If you set C1, C2, C3 and C4 to zero, the Quad Par Can will have
no LEDs on (blackout).
If you set C1 to 99 and C2, C3 and C4 to zero, the colour will be 100% Red.
RED
Brightness C100 - C199
GREEN
Brightness C200 - C299
BLUE
Brightness C300 - C399
WHITE
Brightness C400 - C499
STROBE
Speed CF00 - CF99
8 9
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
FRANCAIS FRANCAIS
FRANCAIS FRANCAIS
DEUTSCH
ENGLISH
MODE SELECTION:
COLOUR JUMPING MODE
Press the MODE button repeatedly if necessary to select the Colour Jumping
Mode (JXXX). Press ENTER (2. digit blinks) to select the 15 colour jumping
function (JUXX) or the strobe function (JFXX) by using the UP and DOWN
buttons.
Press ENTER again (3. and 4. digit blink) to adjust jumping speed (JU00 -
JU99) and strobe speed (JF00 - JF99) by using the UP and DOWN buttons.
Press ENTER to conrm.
Note: It is possible to use the colour jumping function and the strobe function
simultaneously.
RGBW 15 COLOUR
Jumping speed JU00 - JU99
STROBE
Speed JF00 - JF99
COLOUR FADING MODE
Press the MODE button repeatedly if necessary to select the Colour Fading
Mode (FXXX). Press ENTER (2. digit blinks) to select the 15 colour fading
function (FAXX) or the strobe function (FFXX) by using the UP and DOWN
buttons. Press ENTER again (3. and 4. digit blink) to adjust fading speed
(FA00 - FA99) and strobe speed (FF00 - FF99) by using the UP and DOWN
buttons. Press ENTER to conrm.
Note: It is possible to use the colour fading function and the strobe function
simultaneously.
RGBW 15 COLOUR
Fading speed FA00 - FA99
STROBE
Speed FF00 - FF99
10 11
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
MODE SELECTION:
AUTO MODE
Press the MODE button repeatedly if necessary to select the Auto Mode.
The unit changes between Colour Jumping Mode and Colour Fading Mode
automatically. The colour jumping and fading speed can be preadjusted by
using the speed settings of the Colour Jumping and Colour Fading Modes.
SLAVE MODE
Press the MODE button repeatedly if necessary to enter the Slave Mode.
Link slave units and the master unit (exclusively standalone modes) via
DMX cables. The slave unit will follow in sequence with the master unit.
SOUND CONTROL MODE
Press the MODE button repeatedly if necessary to select the Sound Control
Mode (SUXX). The unit will follow the beat of the music thanks to the built
in microphone. Press ENTER again (3. and 4. digit blink) to adjust the sensi-
tivity of the microphone (SU00 - SU99) by using the UP and DOWN buttons.
Press ENTER to conrm.
DMX MODE SELECTION
Press the MODE button to enter DMX MODE SELECTION (repeatedly if ne-
cessary). Press ENTER (1st digit blinks) and select the desired DMX mode
by using the UP and DOWN buttons. Press ENTER again to conrm.
Note: See the description of the different DMX modes on the following
pages of this manual.
DMX ADDRESS SETTING MODE
Press the MODE button repeatedly if necessary to enter the DMX Address
Setting Mode (AXXX).
Press ENTER to access edit mode (the last 3 digits blink) and select the
desired DMX start address by using the UP and DOWN buttons (A001 -
A512). Press ENTER to conrm.
NOTE:
The LED display automatically turns off after about 1 minute and turns on
again by pressing any of the 4 buttons.
Table of contents
Languages:
Other Cameo Floodlight manuals
Cameo
Cameo FLAT PRO CLPFLATPRO7IP65 User manual
Cameo
Cameo FLAT STORM User manual
Cameo
Cameo PAR 56 CAN User manual
Cameo
Cameo CLMPAR3 User manual
Cameo
Cameo OPUS S5 User manual
Cameo
Cameo clmpar1 User manual
Cameo
Cameo CLP64RGB3W User manual
Cameo
Cameo CLP64RGBA10 User manual
Cameo
Cameo Zenit B200 User manual
Cameo
Cameo CLPFLATPRO7 User manual
Cameo
Cameo EVOS S3 User manual
Cameo
Cameo X3 TW User manual
Cameo
Cameo HYDRABEAM 100 User manual
Cameo
Cameo CLFLOODIP65TRI User manual
Cameo
Cameo CLPIXBAR600PRO User manual
Cameo
Cameo CLQS15RGBW User manual
Cameo
Cameo CLTWINSCAN20 User manual
Cameo
Cameo PAR 56 CAN CLP56RGB05 User manual
Cameo
Cameo X3 D User manual
Cameo
Cameo CLPFLATPRO7 User manual
