Cabletron Systems MicroMMAC-24E User manual

DISPLAY RESET

EPIM 2

12X 11X 10X 9X 8X 7X 6X 5X 4X 3X 2X 1X

MicroMMAC-24E

10BASE-T HUB

WITH

LANVIEW

COM 1COM 2 EPIM 1

CABLETRON

MicroMMAC-24

24 23 22 21 20 19 18 17 16 15 14 13

12 11 10 987

65432 1

19X

20X

21X

22X23X24X 18X 17X 16 X 15 X 14 X 13 X

CLN

PWR

CPU RCV

LNK

RCV

LNK

DISPLAY RESET

EPIM 2

MicroMMAC-34E

10BASE-T HUB

WITH

LANVIEW

COM 1COM 2 EPIM 1

CABLETRON

MicroMMAC-34

24 23 22 21 20 19 18 17 16 15 14 13

12 11 10 987

65432 1

CLN

PWR

CPU RCV

LNK

RCV

LNK

12X 1X

24X 13X

MicroMMAC

10BASE-T INTELLIGENT STACKABLE HUB

INSTALLATION GUIDE

MicroMMAC Installation Guide i

NOTICE

Cabletron Systems reserves the right to make changes in speciﬁcations and other information

contained in this document without prior notice. The reader should in all cases consult Cabletron

Systems to determine whether any such changes have been made.

The hardware, ﬁrmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL,

INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT

NOT LIMITED TO LOST PROFITS)ARISING OUT OF OR RELATED TO THIS MANUAL OR

THE INFORMATION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN

ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH

DAMAGES.



Printed in the United States of America

Order Number: 9030908-02 April 1996

SPECTRUM

LANVIEW

MicroMMAC

, and

BRIM

are registered trademarks and

Element

Manager

EPIM

EPIM-A

EPIM-F1

EPIM-F2

EPIM-F3

EPIM-T

EPIM-X

FOT-F

FOT-F3

HubSTACK

SEH

SEHI

, and

TMS-3

are trademarks of Cabletron Systems, Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of

their respective companies.

Printed on Recycled Paper

Notice

ii MicroMMAC Installation Guide

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment uses, generates, and can radiate radio frequency energy and if not installed in

accordance with the operator’s manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause interference in which case the user

will be required to correct the interference at his own expense.

WARNING:

Changes or modifications made to this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

DOC NOTICE

This digital apparatus does not exceed the ClassA limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables

aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique

édicté par le ministère des Communications du Canada.

VCCI NOTICE

This equipment is in the 1st Class Category (information equipment to be used in commercial and/or

industrial areas) and conforms to the standards set by the Voluntary Control Council for Interference

by Information Technology Equipment (VCCI) aimed at preventing radio interference in commercial

and/or industrial areas.

Consequently, when used in a residential area or in an adjacent area thereto, radio interference may be

caused to radios and TV receivers, etc.

Read the instructions for correct handling.

Notice

MicroMMAC Installation Guide iii

CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT

IMPORTANT:

Before utilizing this product, carefully read this License Agreement.

This document is an agreement between you, the end user, and Cabletron Systems, Inc. (“Cabletron”)

that sets forth your rights and obligations with respect to the Cabletron software program (the

“Program”) contained in this package. The Program may be contained in ﬁrmware, chips or other

media. BY UTILIZING THE ENCLOSED PRODUCT,YOU ARE AGREEING TO BECOME

BOUND BY THE TERMS OF THIS AGREEMENT, WHICH INCLUDES THE LICENSE AND

THE LIMITATION OF WARRANTY AND DISCLAIMER OF LIABILITY. IFYOU DO NOT

AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE UNUSED

PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND.

CABLETRON SOFTWARE PROGRAM LICENSE

1. LICENSE. You have the right to use only the one (1) copy of the Program provided in this

package subject to the terms and conditions of this License Agreement.

You may not copy, reproduce or transmit any part of the Program except as permitted by the

2. OTHER RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the

Program.

3. APPLICABLE LAW. This License Agreement shall be interpreted and governed under the laws

and in the state and federal courts of New Hampshire. You accept the personal jurisdiction and

venue of the New Hampshire courts.

EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITY

1. EXCLUSION OF WARRANTY. Except as may be specifically provided by Cabletron in

writing, Cabletron makes no warranty, expressed or implied, concerning the Program (including

its documentation and media).

CABLETRON DISCLAIMS ALL WARRANTIES, OTHER THAN THOSE SUPPLIED TO

YOU BY CABLETRON IN WRITING, EITHER EXPRESSED OR IMPLIED, INCLUDING

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PROGRAM, THE

ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING HARDWARE.

2. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL

CABLETRON OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS,

PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, SPECIAL,

INCIDENTAL, CONSEQUENTIAL, OR RELIANCE DAMAGES, OR OTHER LOSS)

ARISING OUT OF THE USE OR INABILITY TO USE THIS CABLETRON PRODUCT,

EVEN IF CABLETRON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR

ON THE DURATION OR LIMITATION OF IMPLIED WARRANTIES, IN SOME

INSTANCES THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO

YOU.

Notice

iv MicroMMAC Installation Guide

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

The enclosed product (a) was developed solely at private expense; (b) contains “restricted computer

software” submitted with restricted rights in accordance with Section 52227-19 (a) through (d) of the

Commercial Computer Software - Restricted Rights Clause and its successors, and (c) in all respects

is proprietary data belonging to Cabletron and/or its suppliers.

For Department of Defense units, the product is licensed with “Restricted Rights” as deﬁned in the

DoD Supplement to the Federal Acquisition Regulations, Section 52.227-7013 (c) (1) (ii) and its

successors, and use, duplication, disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at

252.227-7013. Cabletron Systems, Inc., 35 Industrial Way, Rochester, New Hampshire 03867-0505.

Notice

MicroMMAC Installation Guide v

DECLARATION OF CONFORMITY

Application of Council Directive(s):

89/336/EEC

73/23/EEC

Manufacturer’s Name:

Cabletron Systems, Inc.

Manufacturer’s Address:

35 Industrial Way

PO Box 5005

Rochester, NH 03867

European Representative Name:

Mr. J. Solari

European Representative Address:

Cabletron Systems Limited

Nexus House, Newbury Business Park

London Road, Newbury

Berkshire RG13 2PZ, England

Conformance to Directive(s)/Product Standards:

EC Directive 89/336/EEC

EC Directive 73/23/EEC

EN 55022

EN 50082-1

EN 60950

Equipment Type/Environment:

Networking Equipment, for use in a

Commercial or Light

Industrial

Environment.

We the undersigned, hereby declare that the equipment packaged with this notice conforms to

the above directives.

Manufacturer Legal Representative in Europe

Mr. Richard Michaud Mr. J. Solari

___________________________________ ___________________________________

Full Name Full Name

Manager of Engineering Services Managing Director - E.M.E.A.

___________________________________ ___________________________________

Title Title

Rochester, NH, USA Newbury, Berkshire, England

___________________________________ ___________________________________

Location Location

MicroMMAC Installation Guide vii

Contents

CHAPTER 1 INTRODUCTION

1.1 How to Use This Manual .............................................................1-1

1.2 Manual Organization ...................................................................1-1

1.3 Document Conventions...............................................................1-2

1.4 MicroMMAC Overview.................................................................1-3

1.5 MicroMMAC Features..................................................................1-4

1.6 Stackable Capabilities.................................................................1-6

1.7 Remote Network Management Capabilities................................1-7

1.8 Optional Features........................................................................1-8

1.9 Related Manuals..........................................................................1-9

1.10 Getting Help...............................................................................1-10

CHAPTER 2 CONTROLS AND INDICATORS

2.1 Identifying MicroMMAC Components..........................................2-1

2.2 Turning the MicroMMAC ON and OFF........................................2-2

2.3 Using the LCD and LCD DISPLAY Button ..................................2-2

2.3.1 Static System Messages ................................................2-3

2.3.2 Saved Alarm Messages..................................................2-4

2.3.3 Unsaved Initialization Messages ....................................2-5

2.3.4 Saved System Messages ...............................................2-6

2.4 Using the Reset Button................................................................2-7

2.5 Using the NVRAM Switch............................................................2-8

CHAPTER 3 INSTALLATION

3.1 Unpacking the MicroMMAC.........................................................3-1

3.2 Removing the Chassis Cover......................................................3-2

3.3 Setting the Mode Switches..........................................................3-4

3.4 Upgrading the FLASH SIMM.......................................................3-6

3.5 Adding/Replacing EPIMs.............................................................3-8

3.6 Adding/Replacing BRIMs.............................................................3-9

3.7 Testing the MicroMMAC..............................................................3-9

3.8 Installing the MicroMMAC..........................................................3-10

3.8.1 Shelf or Tabletop Installation ........................................3-11

3.8.2 Attaching the Strain-Relief Bracket...............................3-12

3.8.3 Rack Mounting the MicroMMAC...................................3-13

3.8.4 Stacking the MicroMMAC .............................................3-14

Contents

viii MicroMMAC Installation Guide

CHAPTER 4 CONNECTING TO THE NETWORK

4.1 Connecting the MicroMMAC to the Network................................4-1

4.1.1 Connecting a 10BASE-T Segment to the MicroMMAC-22E

and MicroMMAC-24E4-2

4.1.2 Connecting a 10BASE-T Segment to the MicroMMAC-32E

and MicroMMAC-34E4-3

4.1.3 Connecting a 10BASE-T Segment to an EPIM-T............4-5

4.1.4 Connecting a 10BASE-F Segment to an EPIM-F1..........4-6

4.1.5 Connecting a 10BASE-F Segment to an EPIM-F2 or

EPIM-F34-8

4.1.6 Connecting a 10BASE2 Segment to an EPIM-C...........4-10

4.1.7 Connecting an AUI Segment to an EPIM-A ..................4-11

4.1.8 Connecting an AUI Segment to an EPIM-X ..................4-13

CHAPTER 5 TROUBLESHOOTING

5.1 Using LANVIEW...........................................................................5-1

5.2 Troubleshooting Checklist............................................................5-3

APPENDIX A MicroMMAC SPECIFICATIONS

A.1 Operating Specifications............................................................. A-1

A.2 Power Supply Requirements ......................................................A-1

A.3 Environmental Requirements...................................................... A-2

A.4 Agency Approvals....................................................................... A-2

A.5 EMI Requirements ...................................................................... A-2

A.6 EMC Requirements..................................................................... A-2

A.7 Physical Specifications ............................................................... A-2

APPENDIX B EPIM SPECIFICATIONS

B.1 EPIM-T........................................................................................ B-1

B.2 EPIM-F1 and EPIM-F2................................................................ B-2

B.3 EPIM-F3...................................................................................... B-3

B.4 EPIM-C .......................................................................................B-5

B.5 EPIM-A and EPIM-X ................................................................... B-6

Contents

MicroMMAC Installation Guide ix

APPENDIX C NETWORK PLANNING AND CONFIGURATION

C.1 Network Cable Requirements......................................................C-1

C.1.1 HubSTACK Interconnect Cable ......................................C-1

C.1.2 10BASE-T UTP and STP Cable......................................C-2

C.1.3 Multimode Fiber Optic Cable...........................................C-4

C.1.4 Single Mode Fiber Optic Cable .......................................C-5

C.1.5 10BASE2 Thin Coaxial Cable .........................................C-6

C.1.6 AUI Cable........................................................................C-7

C.2 Network Port Specifications.........................................................C-7

C.2.1 MicroMMAC-22E and MicroMMAC-24E

Network PortsC-8

C.2.2 MicroMMAC-32E and MicroMMAC-34E

Network PortsC-8

C.3 COM Port Specifications ...........................................................C-10

C.4 Transceiver Requirements ........................................................C-10

INDEX

MicroMMAC Installation Guide Page 1-1

CHAPTER 1

INTRODUCTION

Welcome to the Cabletron Systems

MicroMMAC 10BASE-T

Intelligent Stackable Hub Installation Guide

. This manual provides

installation instructions and reference information for the

MicroMMAC-22E, MicroMMAC-24E, MicroMMAC-32E,

MicroMMAC-34E, MicroMMAC-22ES, MicroMMAC-24ES,

MicroMMAC-32ES, and MicroMMAC-34ES.

1.1 HOW TO USETHIS MANUAL

Read through this manual to gain an understanding of the features and

capabilities of the MicroMMAC. A general knowledge of Ethernet and

IEEE 802.3 type data communications networks and their physical layer

components is helpful when installing the MicroMMAC.

1.2 MANUAL ORGANIZATION

This manual contains the following chapters and appendices:

Chapter 1,

Introduction

, outlines the contents of this manual, brieﬂy

describes MicroMMAC features, and concludes with a list of related

manuals.

Chapter 2,

Controls and Indicators

, shows the controls and indicators of

the MicroMMAC.

Chapter 3,

Installation

, describes how to install the MicroMMAC as a

stackable or standalone device.

Chapter 4,

Connecting to the Network

, explains how to connect the

MicroMMAC to the network using the various media types.

NOTE

Unless it is noted differently in this guide, the term MicroMMAC

refers to the MicroMMAC-22E, MicroMMAC-24E,

MicroMMAC-32E, MicroMMAC-34E, MicroMMAC-22ES,

MicroMMAC-24ES, MicroMMAC-32ES, and

MicroMMAC-34ES.

This manual suits for next models

Table of contents

Other Cabletron Systems Switch manuals

Cabletron Systems

Cabletron Systems SmartSTACK 100 ELS100-16TX User manual

Cabletron Systems

Cabletron Systems MMAC-Plus 9F310-02 User manual

Cabletron Systems

Cabletron Systems 6H122-08 User manual

Cabletron Systems

Cabletron Systems MMAC-Plus 9T125-08 User manual

Cabletron Systems

Cabletron Systems SmartCell 6A000 User manual

Cabletron Systems

Cabletron Systems MRXI-22 User manual

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-S24TX2M Programming manual

Cabletron Systems

Cabletron Systems 924TX Operating and maintenance instructions

Cabletron Systems

Cabletron Systems SmartSTACK 100 User manual

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Technical document

Cabletron Systems

Cabletron Systems 6H128-08 User manual

Cabletron Systems

Cabletron Systems ATX User manual

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-S24TX2M User manual

Cabletron Systems

Cabletron Systems MMAC-Plus SFCS-1000 Instruction sheet

Cabletron Systems

Cabletron Systems Ethernet Hubs User manual

Cabletron Systems

Cabletron Systems CyberSWITCH CSX150 User manual

Cabletron Systems

Cabletron Systems 2E48-27R User manual

Cabletron Systems

Cabletron Systems 9F426-03 User manual

Cabletron Systems

Cabletron Systems SmartSwitch SBU128 User manual

Cabletron Systems

Cabletron Systems Netlink FRX8000 User manual

Cabletron Systems

Cabletron Systems SmartSTACK STS16-20RM User manual

Cabletron Systems

Cabletron Systems Spectrum 2E42-27 User manual

Cabletron Systems

Cabletron Systems SmartSwitch 6E122 Owner's manual

Cabletron Systems

Cabletron Systems SmartSwitch 6500 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual