Cabletron Systems 9F120-08 Technical document

9031372-01

SmartSwitch 9000

9F120-08 / 9F122-12 / 9F125-08

Local Management Appendix

Appendix

9F120-08 / 9F122-12 / 9F125-08

Module Speciﬁc Information

Introduction

This appendix contains local management information that is speciﬁc to the

9F120-08, 9F122-12 and 9F125-08 MicroLAN modules.

Default Interface Codes

The Default Interface ﬁeld on the General Conﬁguration Screen allows you to

enter a number (one through three). Each number represents a default interface

for the selected module. The table below lists the numbers you can enter, each

number’s corresponding interface, and a brief description of that interface. The

default for this ﬁeld is NONE, meaning no default interface selected.

Table 1. 9F12x-xx MicroLAN Module Default Interface Codes

Number Interface Description

1 SMB-1 1 mbps System Management Bus

2 SMB-10 10 mbps System Management Bus

3 FNB Flexible Network Bus (dual attached)

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

FNB Resource Conﬁguration Codes

All of the MicroLAN Modules described in this appendix physically attach to the

FNB-1 and the FNB-2 on the SmartSwitch 9000 backplane. By default, the module

inserts into four rings (the primary and secondary rings of the FNB-1 and the

FNB-2). The FNB Resource Conﬁguration Screen allows you to customize this

conﬁguration to your particular needs.

The FNB Resource Conﬁguration Screen allows you to:

• Select the rings (primary or secondary) of each FNB to which the module will

attach

• Determine whether the module will insert into those rings or bypass them

• Select the ring where the MAC will reside

The terms INSERT and BYPASS refer to relays that are located on the module.

INSERT causes a relay to connect the module’s front panel ports to the selected

ring. BYPASS causes a relay to disconnect the module’s front panel ports from the

selected ring.

INSERT:

BYPASS:

The FNB Resource Conﬁguration Screen lists all possible connections a module

can support on the FNB, displays the current connection, and allows you to

change the connection. Table 2 lists and describes the FDDI Connections from

which you can select.

Front FNB Ring

Relay

Panel

Ports

Front

Panel

Ports

FNB Ring

Relay

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes

Conﬁguration

ID FDDI Connections Description

1 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached, but not inserted, to

the primary ring on the FNB-1. The module is

attached, but not inserted, to the primary ring

on the FNB-2. The MAC resides on FNB-1.

2 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-1.

3 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-1.

4 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-1.

5 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-2.

6 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned off. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-2.

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

7 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned off. The MAC resides

on FNB-2.

8 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 primary ring. The switch

that inserts the module into the FNB-1 is

turned on. The switch that inserts the module

into the FNB-2 is turned on. The MAC resides

on FNB-2.

9 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

10 FNB 1 Pri. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

11 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

12 FNB 1 Pri. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

13 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

14 FNB 1 Pri. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

15 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

16 FNB 1 Pri. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1 primary

ring and the FNB-2 secondary ring. The

switch that inserts the module into the FNB-1

is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

17 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

18 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

19 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

20 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Pri. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

21 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

22 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

23 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

24 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Pri. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 primary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

25 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

26 FNB 1 Sec. (MAC) Byp. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

27 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-1.

28 FNB 1 Sec. (MAC) Ins. ,

FNB 2 Sec. (No MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-1.

29 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

30 FNB 1 Sec. (No MAC) Byp. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned off. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

9F120-08 / 9F122-12 / 9F125-08 Module Speciﬁc Information

31 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Byp.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned off. The

MAC resides on FNB-2.

32 FNB 1 Sec. (No MAC) Ins. ,

FNB 2 Sec. (MAC) Ins.

The module is attached to the FNB-1

secondary ring and the FNB-2 secondary ring.

The switch that inserts the module into the

FNB-1 is turned on. The switch that inserts the

module into the FNB-2 is turned on. The MAC

resides on FNB-2.

Table 2. 9F12x-xx MicroLAN Module FNB Resource Conﬁguration Codes (Continued)

Conﬁguration

ID FDDI Connections Description

This manual suits for next models

Table of contents

Other Cabletron Systems Switch manuals

Cabletron Systems

Cabletron Systems MMAC-Plus 9EX02-12 User manual

Cabletron Systems

Cabletron Systems FN10 User manual

Cabletron Systems

Cabletron Systems SmartSTACK EPIM1000-S1LX 1000BASE-LX User manual

Cabletron Systems

Cabletron Systems 2E48-27R User manual

Cabletron Systems

Cabletron Systems SmartSwitch 9W006 User manual

Cabletron Systems

Cabletron Systems 2H28-08R User manual

Cabletron Systems

Cabletron Systems CyberSWITCH CSX150 User manual

Cabletron Systems

Cabletron Systems TSX-1620 User manual

Cabletron Systems

Cabletron Systems 3T02-04 User manual

Cabletron Systems

Cabletron Systems 6A000/ZX-250 User manual

Cabletron Systems

Cabletron Systems MRXI 10BASE-T User manual

Cabletron Systems

Cabletron Systems ESXMIM Programming manual

Cabletron Systems

Cabletron Systems SmartSTACK 100 ELS100-24TX Installation and operating instructions

Cabletron Systems

Cabletron Systems MMAC-Plus 9E312-12 Technical document

Cabletron Systems

Cabletron Systems SmartCell 6A000 User manual

Cabletron Systems

Cabletron Systems MMAC-Plus 9T125-24 User manual

Cabletron Systems

Cabletron Systems STH 24 STH-24 User manual

Cabletron Systems

Cabletron Systems CyberSWITCH CSX150 User manual

Cabletron Systems

Cabletron Systems SEHI-22 User manual

Cabletron Systems

Cabletron Systems SynOptics 3000 Series User manual

Cabletron Systems

Cabletron Systems 6C105 User manual

Cabletron Systems

Cabletron Systems SmartSTACK ELS10-27TX Owner's manual

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Technical document

Cabletron Systems

Cabletron Systems FRM User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual