Cabletron Systems BRIM-A6DP User manual

BRIM-A6DP

USER’S GUIDE

BRIM-A6DP User’s Guide i

NOTICE

Cabletron Systems reserves the right to make changes in speciﬁcations and other information

contained in this document without prior notice. The reader should in all cases consult Cabletron

Systems to determine whether any such changes have been made.

The hardware, ﬁrmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FORANY INCIDENTAL,

INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT

NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR

THE INFORMATION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN

ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH

DAMAGES.



Printed in the United States of America

Order Number: 9031429-03 May 1997

SPECTRUM

LANVIEW

MicroMMAC

, and

BRIM

are registered trademarks and

Element

Manager

EPIM

EPIM-A

EPIM-F1

EPIM-F2

EPIM-F3

EPIM-T

EPIM-X

FOT-F

FOT-F3

HubSTACK

SEH

SEHI

, and

TMS-3

are trademarks of Cabletron Systems, Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of

their respective companies.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment uses, generates, and can radiate radio frequency energy and if not installed in

accordance with the operator’s manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause interference in which case the user

will be required to correct the interference at his own expense.

WARNING:

Changes or modifications made to this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

Only qualiﬁed personnel should perform installation

procedures.

Printed on Recycled Paper

Notice

ii BRIM-A6DP User’s Guide

DOC NOTICE

This digital apparatus does not exceed the ClassA limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables

aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique

édicté par le ministère des Communications du Canada.

VCCI NOTICE

This equipment is in the 1st Class Category (information equipment to be used in commercial and/or

industrial areas) and conforms to the standards set by the Voluntary Control Council for Interference

by Information Technology Equipment (VCCI) aimed at preventing radio interference in commercial

and/or industrial areas.

Consequently, when used in a residential area or in an adjacent area thereto, radio interference may be

caused to radios and TV receivers, etc.

Read the instructions for correct handling.

CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT

IMPORTANT:

Before utilizing this product, carefully read this License Agreement.

This document is an agreement between you, the end user, and Cabletron Systems, Inc. (“Cabletron”)

that sets forth your rights and obligations with respect to the Cabletron software program (the

“Program”) contained in this package. The Program may be contained in ﬁrmware, chips or other

media. BY UTILIZING THE ENCLOSED PRODUCT,YOU ARE AGREEING TO BECOME

BOUND BY THE TERMS OF THIS AGREEMENT, WHICH INCLUDES THE LICENSE AND

THE LIMITATION OF WARRANTY AND DISCLAIMER OF LIABILITY. IFYOU DO NOT

AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE UNUSED

PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND.

Notice

BRIM-A6DP User’s Guide iii

CABLETRON SOFTWARE PROGRAM LICENSE

1. LICENSE. You have the right to use only the one (1) copy of the Program provided in this

package subject to the terms and conditions of this License Agreement.

You may not copy, reproduce or transmit any part of the Program except as permitted by the

2. OTHER RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the

Program.

3. APPLICABLE LAW. This License Agreement shall be interpreted and governed under the laws

and in the state and federal courts of New Hampshire. You accept the personal jurisdiction and

venue of the New Hampshire courts.

EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITY

1. EXCLUSION OF WARRANTY. Except as may be specifically provided by Cabletron in

writing, Cabletron makes no warranty, expressed or implied, concerning the Program (including

its documentation and media).

CABLETRON DISCLAIMS ALL WARRANTIES, OTHER THAN THOSE SUPPLIED TO

YOU BY CABLETRON IN WRITING, EITHER EXPRESSED OR IMPLIED, INCLUDING

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PROGRAM, THE

ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING HARDWARE.

2. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL

CABLETRON OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS,

PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, SPECIAL,

INCIDENTAL, CONSEQUENTIAL, OR RELIANCE DAMAGES, OR OTHER LOSS)

ARISING OUT OF THE USE OR INABILITY TO USE THIS CABLETRON PRODUCT,

EVEN IF CABLETRON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR

ON THE DURATION OR LIMITATION OF IMPLIED WARRANTIES, IN SOME

INSTANCES THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO

YOU.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

The enclosed product (a) was developed solely at private expense; (b) contains “restricted computer

software” submitted with restricted rights in accordance with Section 52227-19 (a) through (d) of the

Commercial Computer Software - Restricted Rights Clause and its successors, and (c) in all respects

is proprietary data belonging to Cabletron and/or its suppliers.

For Department of Defense units, the product is licensed with “Restricted Rights” as deﬁned in the

DoD Supplement to the Federal Acquisition Regulations, Section 52.227-7013 (c) (1) (ii) and its

successors, and use, duplication, disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at

252.227-7013. Cabletron Systems, Inc., 35 Industrial Way, Rochester, New Hampshire 03867-0505.

Notice

iv BRIM-A6DP User’s Guide

DECLARATION OF CONFORMITY

Application of Council Directive(s):

89/336/EEC

73/23/EEC

Manufacturer’s Name:

Cabletron Systems, Inc.

Manufacturer’s Address:

35 Industrial Way

PO Box 5005

Rochester, NH 03867

European Representative Name:

Mr. J. Solari

European Representative Address:

Cabletron Systems Limited

Nexus House, Newbury Business Park

London Road, Newbury

Berkshire RG13 2PZ, England

Conformance to Directive(s)/Product Standards:

EC Directive 89/336/EEC

EC Directive 73/23/EEC

EN 55022

EN 50082-1

EN 60950

Equipment Type/Environment:

Networking Equipment, for use in a

Commercial or Light

Industrial

Environment.

We the undersigned, hereby declare, under our sole responsibility, that the equipment packaged

with this notice conforms to the above directives.

Manufacturer Legal Representative in Europe

Mr. Ronald Fotino Mr. J. Solari

___________________________________ ___________________________________

Full Name Full Name

Principal Compliance Engineer Managing Director - E.M.E.A.

___________________________________ ___________________________________

Title Title

Rochester, NH, USA Newbury, Berkshire, England

___________________________________ ___________________________________

Location Location

BRIM-A6DP User’s Guide v

CONTENTS

CHAPTER 1 INTRODUCTION

1.1 Using This Manual.......................................................................1-1

1.2 Document Conventions...............................................................1-2

1.3 BRIM-A6DP Overview.................................................................1-3

1.4 BRIM-A6DP Features..................................................................1-3

1.5 Related Manuals..........................................................................1-4

1.6 Getting Help.................................................................................1-5

CHAPTER 2 INSTALLATION

2.1 Unpacking the BRIM....................................................................2-1

2.2 Installing APIMs...........................................................................2-2

2.3 Installing BRIMs...........................................................................2-3

2.3.1 Installing a BRIM in a MIM..............................................2-3

2.3.2 Installing a BRIM in a Hub ..............................................2-6

CHAPTER 3 LOCAL MANAGEMENT

3.1 Local Management Keyboard Conventions.................................3-2

3.2 Accessing BRIM-A6DP Local Management................................3-3

3.3 The ATM Setup Screen...............................................................3-4

3.4 The Connection Table Screen.....................................................3-5

3.4.1 Connection Table Screen Fields.....................................3-5

3.5 The Add/Delete Entry Screen......................................................3-7

3.5.1 Add/Delete Entry Screen Fields......................................3-8

3.5.2 Adding an Entry (PVC) ...................................................3-9

3.5.3 Modifying an Entry (PVC) .............................................3-10

3.5.4 Deleting an Entry (PVC) ...............................................3-10

3.6 The LEC Administration Screen................................................3-11

3.6.1 LEC Administration Screen Fields................................3-12

3.6.2 Configuring the LEC Automatically...............................3-14

3.6.3 Configuring the LEC Manually......................................3-14

3.7 The ELAN Properties Screen....................................................3-15

3.7.1 ELAN Properties Screen Fields....................................3-16

3.8 The Signalling Screen ...............................................................3-18

3.8.1 Signalling Screen Fields ...............................................3-19

3.8.2 Setting the SVC Signalling and LAN Emulation Type...3-20

3.8.3 Enabling and Disabling the ILMI...................................3-20

3.8.4 Setting the LEC ATM Address......................................3-21

Contents

vi BRIM-A6DP User’s Guide

3.9 The VLAN Assignment Screen ..................................................3-22

3.9.1 Port/VLAN Assignment Screen Fields...........................3-22

3.10 VLAN Overview..........................................................................3-24

3.10.1 Configuration Guidelines...............................................3-25

3.11 Creating VLANs .........................................................................3-27

3.11.1 ATM LEC VLANs...........................................................3-27

3.11.2 Ethernet-only VLANs.....................................................3-29

3.12 The Router MAC Address Screen .............................................3-30

3.12.1 Router MAC Address Screen Fields .............................3-30

3.12.2 Adding MAC Entries......................................................3-32

3.12.3 Deleting MAC Entries....................................................3-32

CHAPTER 4 LANVIEW LEDs

4.1 BRIM-A6DP LEDs........................................................................4-1

4.2 APIM LEDs ..................................................................................4-2

APPENDIX A APIM SPECIFICATIONS

A.1 APIM-11 Specifications...............................................................A-1

A.2 APIM-21 Specifications...............................................................A-2

A.3 APIM-29 Specifications...............................................................A-3

A.4 APIM-29LR Specifications .......................................................... A-4

A.5 APIM-22 Specifications...............................................................A-5

A.6 APIM-67 Specifications...............................................................A-6

APPENDIX B BRIM-A6DP SPECIFICATIONS

B.1 BRIM-A6DP Specifications ......................................................... B-1

BRIM-A6DP User’s Guide 1-1

CHAPTER 1

INTRODUCTION

Welcome to the Cabletron Systems

BRIM-A6DP User’s Guide

. This

manual provides the following information:

• Describes BRIM-A6DP features.

• Explains how to install the BRIM-A6DP in a Cabletron Systems

Media Interface Module (MIM) or standalone hub.

• Provides instructions on using BRIM-A6DP Local Management to

perform functions such as viewing current ATM connections,

conﬁguring Permanent Virtual Channels (PVCs), conﬁguring LAN

Emulation Clients (LECs), viewing Emulated LAN properties,

conﬁguring operating parameters for Switched Virtual Channels

(SVCs), and assigning front panel Ethernet ports and/or Emulated

LANs (ELANs) to Virtual LANs (VLANs).

• Outlines speciﬁcations for the Cabletron Systems Asynchronous

Transfer Mode (ATM) Bridge/Router Interface Module (BRIM).

The BRIM-A6DP provides additional connectivity/functionality to

various Cabletron MIMs and standalone hubs.You should have a general

working knowledge of ATM networks and the ATM User-Network

Interface Speciﬁcation (UNI), as speciﬁed by the ATM Forum, prior to

installing the BRIM-A6DP.

1.1 USINGTHIS MANUAL

Read through this manual completely to familiarize yourself with its

content and to gain an understanding of the features and capabilities of

the BRIM-A6DP. The following list provides an overview of each section

of this manual:

Chapter 1,

Introduction

, outlines the contents of this manual, describes

BRIM-A6DP features and concludes with a list of related manuals.

Chapter 2,

Installation

, describes how to install ATM Port Interface

Modules (APIMs) into the BRIM-A6DP. This chapter also explains how

to install a BRIM-A6DP into a MIM or a standalone hub.

Chapter 1:

Introduction

1-2 BRIM-A6DP User’s Guide

Chapter 3,

Local Management

, describes how to use the BRIM-A6DP

Local Management screens to perform a variety of conﬁguration and

management procedures.

Chapter 4,

LANVIEW LEDs

, describes how to use the BRIM-A6DP

LEDs to monitor BRIM performance and status.

Appendix A,

APIM Specifications

, describes speciﬁcations and features

for each of the APIMs available for the BRIM-A6DP.

Appendix B,

BRIM-A6DP Specifications

, describes speciﬁcations and

safety compliance for the BRIM-A6DP.

1.2 DOCUMENT CONVENTIONS

The following conventions are used throughout this document:

NOTE

Note

symbol. Calls the reader’s attention to any item of

information that may be of special importance.

TIP

Tip

symbol. Conveys helpful hints concerning procedures or

actions.

CAUTION

Caution

symbol. Contains information essential to avoid

damage to the equipment.

Electrical Hazard Warning

symbol.Warns against an action

that could result in personal injury or death due to an electrical

hazard.

Table of contents

Other Cabletron Systems Network Hardware manuals

Cabletron Systems

Cabletron Systems 6H133-37 User manual

Cabletron Systems

Cabletron Systems MMAC-5FNB User manual

Cabletron Systems

Cabletron Systems Environmental Module TM 9C300-1 User manual

Cabletron Systems

Cabletron Systems EPIM-3PS User manual

Cabletron Systems

Cabletron Systems 3F00-01 User manual

Cabletron Systems

Cabletron Systems NBR-220 User manual

Cabletron Systems

Cabletron Systems WPIM-DI Installation and maintenance instructions

Cabletron Systems

Cabletron Systems CRBRIM-W/E User manual

Cabletron Systems

Cabletron Systems 6E122-26 User manual

Cabletron Systems

Cabletron Systems SWPIM-BRI User manual

Cabletron Systems

Cabletron Systems Netlink FRX4000 Operating manual

Cabletron Systems

Cabletron Systems MMAC-M5FNB User manual

Cabletron Systems

Cabletron Systems ATX Manual

Cabletron Systems

Cabletron Systems 3Com PortSwitch Hub User manual

Cabletron Systems

Cabletron Systems 9F241-12 Technical document

Cabletron Systems

Cabletron Systems WPIM-SY Programming manual

Cabletron Systems

Cabletron Systems 9E106-06 User manual

Cabletron Systems

Cabletron Systems 1082 User manual

Cabletron Systems

Cabletron Systems IRBM/LM User manual

Cabletron Systems

Cabletron Systems Expansion module DELHE-UA User manual

Cabletron Systems

Cabletron Systems Netlink FRX8000 Assembly instructions

Cabletron Systems

Cabletron Systems SSIM-T8-04 User manual

Cabletron Systems

Cabletron Systems TRMIM-32A User manual

Cabletron Systems

Cabletron Systems 9C300-1 Quick start guide

Popular Network Hardware manuals by other brands

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL product manual

B&B Electronics

B&B Electronics ZXT9-IO-222R2 product manual

Yudor

Yudor YDS-16 user manual

D-Link

D-Link ShareCenter DNS-320L datasheet

Samsung

Samsung ES1642dc Hardware user manual

Honeywell Home

Honeywell Home LTEM-PV Installation and setup guide

evertz

evertz 7700 Series manual

D-Link

D-Link ShareCenter DNS-343 Quick installation guide

Asante

Asante AsanteBridge 1012 user guide

FireBrick

FireBrick FB2700 user manual

Audiovox Electronics

Audiovox Electronics ARWH2T user manual

ADC

ADC DSX-1 Operational Procedures Guide

NetComm

NetComm NF2 user guide

Alcatel-Lucent

Alcatel-Lucent 5620 user guide

Dell EMC

Dell EMC XC6420 Series Solution guide

Lanner

Lanner NCA-1020A user manual

Allied Telesis

Allied Telesis AT-TN121-A Specifications

Arista

Arista CCA-ETM-Q12 quick start guide