Buffalo CloudStor CS-WV/1D User manual
User Manual
CloudStor
CS-WX/1D and CS-WV/1D
www.buffalotech.com v1.4
™
2
Introduction
Thank you for purchasing the Buffalo CloudStor. This simple device gives you the exibility
of cloud-based storage without the worries that come with storing your important data
on someone else’s servers. Using Pogoplug software, the CloudStor lets you serve up les,
photos, and multimedia over the Web to any of your devices, wherever you may be.
Turn to page 4 to set up your CloudStor.
Because we’re constantly updating our products, the images and text in this manual may vary
slightly from the images and text displayed by your CloudStor. As time passes, future user
interfaces, updated software, and later versions of this manual may be available for download
from www.buffalotech.com. For more information on CloudStor, see buffalocloudstor.com.
3
Table of Contents
Introduction
Setup 4
Diagrams and Layout 7
Power Mode Switch 10
Using your CloudStor
Login 11
Uploading 12
Downloading 13
Pogoplug Applications 14
Sharing 15
Search 18
Slideshows 19
Creating New Folders 20
Renaming Files and Folders 21
Renaming Devices 22
Active Copy 23
Settings and Conguration
General Settings 24
Social Settings 25
Media Settings 27
Security Settings 29
Upload Settings 30
Adding a Printer 31
Device Settings 34
Local Settings 35
Adding a Second Drive 38
Time Machine 40
BitTorrent Client 44
Direct Copy 46
Troubleshooting
Status LED Flash Codes 47
Appendix
Specications 49
Contact Information (USA) 50
Contact Information (Europe) 51
GPL Information 52
4
Open a browser window on your computer and go to https://mycloudstor.com/. Click Set Up
Your CloudStor.
Plug one end of the included Ethernet cable into the Ethernet port on your CloudStor and the
other end into any available LAN port on your router.
In the browser window, click Next.
Setup
USB
FUNCTION
AUTO
ON
OFF
DC-IN
LAN
LAN
WAN
LAN LAN
5
Now, plug your CloudStor into a surge protector, wall socket, or power strip.
Move the power mode switch on the back of the unit to the on (middle) position. The blue power
LED will begin to blink.
Wait for the CloudStor to boot. This will take about 5 minutes. When the power LED on the
front panel stops blinking and glows steadily, the unit has nished booting. The Info/Error LED
should not be blinking. If it is, turn to the next page to troubleshoot.
In the browser window, click Next. Follow the instructions on the screen to nish installing your
CloudStor.
USB
FUNCTION
AUTO
ON
OFF
DC-IN
LAN
6
If you’ve connected your CloudStor to a power source and to a router, but the Info/Error LED
is ashing amber or your CloudStor suddenly turned off by itself, here are some things you can
check:
Is the power mode switch on the back of the CloudStor in the On position? If it’s in the Auto
(top) position, the CloudStor may suddenly shut down after a few minutes. Move it to the On
(bottom) position until you’ve installed NAS Navigator software on your computers.
Is the Info/Error LED on the front of your CloudStor ashing amber? Check the following:
Is the Ethernet cable connected to your CloudStor and to your router?
Is your router turned on?
Is your router congured to automatically assign IP addresses (DHCP)?
Do you have a rewall installed that blocks UDP, or is UDP disabled on your router?
If you have veried all of the above and the Info/Error LED on the front of your CloudStor is
still ashing, please move the power mode switch to the Off position, wait until the Power LED
turns off, and then move it back to the On position. It will take several minutes to boot.
If you continue to have problems, please contact tech support. Tech support contact
information is available on pages 50 and 51.
Troubleshooting
7
Back Panel Layout
Front
Power LED
Function LED
Info/Error LED
Front Cover
(pull straight
toward you to
remove)
8
Back Panel Layout
Front Panel Removed
Spare drive bay
for optional 2nd
drive
Main hard drive
Press tab to
release drive
9
Front Panel Layout
Rear
Function Button
USB
Fan
Auto Power
Power On
Power Off
Ethernet
(to router)
Power
Socket for
Kensington-style lock
Power cord
stress relief
10
The “Power Mode” switch on the back of the
unit has three positions: Auto, On, and Off.
The Auto position automatically powers the
unit on or off with your PC. If your PC is turned
on the CloudStor will power up; if the PC is
turned off the CloudStor will power down.
You must have installed the NAS Navigator
software (available from www.buffalotech.com)
on your PC for this feature to work. Otherwise,
if you move the switch to Auto, your unit will
power down by itself and you will have to
manually turn it back on.
Move the switch to the On (middle) position to
have the CloudStor turn on and stay on.
To turn off the CloudStor, move the switch to
the Off position. It will take several minutes to
fully shut down. Do not unplug the unit until
shutdown is complete and the power LED is no
longer lit.
Power Mode Switch
Power
Mode
This manual suits for next models
1
Table of contents
Other Buffalo Storage manuals
Buffalo
Buffalo DriveStation HD-HS1.0TQ User manual
Buffalo
Buffalo HD-HCU2 DriveStation User manual
Buffalo
Buffalo HD-PV320U2 User manual
Buffalo
Buffalo USB Hard Drive with Encryption HDS-PHU2... User manual
Buffalo
Buffalo DriveStation HD-HBU2 Series User manual
Buffalo
Buffalo HD-LCU3 User manual
Buffalo
Buffalo TeraStation TS3400D User manual
Buffalo
Buffalo MiniStation HD-PZFU3 User manual
Buffalo
Buffalo DriveStation HD-CEIU2 User manual
Buffalo
Buffalo LinkStation Pro Duo LS-WTGL/R1 User manual
Buffalo
Buffalo LS-VL User manual
Buffalo
Buffalo HD-CELU2 DRIVESTATION User manual
Buffalo
Buffalo HD-CXT1.0TU2 User manual
Buffalo
Buffalo TeraStation 5200DS User manual
Buffalo
Buffalo HD-PHS series User manual
Buffalo
Buffalo LS510D User manual
Buffalo
Buffalo TeraStation TS5800D User manual
Buffalo
Buffalo HD-WL2TSU2R1 User manual
Buffalo
Buffalo TS1400R User manual
Buffalo
Buffalo DriveStation HD-CX1.0TU2 User manual
