Brother MFC-9070 User manual
1
*1 MFC Software Suite includes Printer Driver, Scanner Driver, PC-FAX software and Remote Setup.
Windows®XP restricts scanning resolution to a max. of 600 dpi and Paper size to 8.5” (215.9 mm) x 11.7” (297 mm).
3. Click MFC Software Suite in Main
Application, and then click Install. *1
2. Click Install Software.
5. When the PaperPort®8.0 SE Setup
window is displayed, click Next.7. Select Typical and click Next.6. After reading and accepting the License Agreement, enter your user information and
click Next.
Setting Up the machine and PC to Work Together
BeforeYou begin
• When necessary, please purchase the appropriate interface cable you intend to use with this machine (parallel or USB).
• Some illustrations are based on the MFC-9070.
Use only a shielded parallel interface cable that is IEEE 1284-compliant and/or a USB cable that is no longer than 6 feet long (1.8 meters).
You must set up the hardware and install the driver before you can use your machine as a printer and scanner
with your application. Brother offers both a Windows®LogoTested (WHQL) driver and a Brother Native Driver
on the CD-ROM.The Windows®LogoTested Driver is automatically installed when you follow the installation
steps below.The Brother Native driver offers some features that are not available with theWindows®Logo
Tested Driver.The features available on the Brother Native driver can vary by model. Please visit us at
http://solutions.brother.com for details on these features.You must follow steps 1 to 7 before you can proceed
to the installation procedure for the Brother Native Driver.
Installation of Brother Drivers for Windows®XP
Step 1.
Shut down and turn OFF your computer.
Step 2.
Unplug the MFC from the AC outlet and disconnect the interface cable if you have
already connected it.
Step 3.
Turn on your computer.
Note: If the“Found New HardwareWizard”appears before the installation of the software, you should click on
Cancel to exit theWizard, and then start the installation program from the CD-ROM.
Step 4.
Insert the CD-ROM labelled “For Windows®XP”into the CD-ROM drive.
For Windows®XP Users
1. Click your language.The CD-ROM
main menu will appear.
If the model name screen appears,
click on your model name.
The CD-ROM main menu will appear.
If the CD-ROM does NOT start
automatically, start the installer
application by clicking Start, Run,
then type x:\ setup.exe (where x:\ is
the drive letter of your CD-ROM
drive).
4. Click Install.
2
1. When the above screen appears,
click Next to start the PC-FAX and
Remote Setup Installation Program.
2. Select the folder where Setup will
install the program files. If you do not
wish to use the default directory, click
the Browse button to select a new
folder and then click Next to continue.
4. If this screen appears, select the
components to install (the default
gives you the most functionality), and
then click Next.
5. The installation process will now start. 6. If this screen appears, select the
model of the machine which you want
to use to send PC-Faxes and then
click OK.
7. Select “Yes” to restart your computer,
and then click Finish.
11. Select an interface cable, and then
press Next to start Driver installation.
For Parallel
For USB
9. When the Registration screen is
displayed, make your selection and
follow the on screen instructions.
10. Click Finish to complete ScanSoft™
PaperPort®installation.
8. Click Install and PaperPort®will start installing on your computer.
Step 5.
Connect the machine to your PC
using the parallel or USB cable.
Step 6.
Turn on the machine by plugging in the power cord (and if necessary switch on the
machine power switch).
The installation of the Brother drivers will start automatically.
Step 7.
Follow the instructions on the screen.
Note: If you are installing a DCP model, installation is complete.
3. Select the program folder in which
you wish to add the program icons,
and then click Next.
3
10. The model you are installing will be
listed in the window.Select Yes or No
if you want this driver to be your
default printer.
11. If the above screen appears select
“Do not share this printer” and
Next.
12. Select “Yes” and Next to print a test
page.
13. When the above screen appears click
Finish.14. If the Windows Logo testing screen
appears click Continue Anyway.This
completes the installation of the
Brother Native Driver.
Note: There will be two Brother printer drivers listed
in the Printers and Faxes selection.The driver
without hyphen in the model name
(Ex. Brother MFC9070) is the Brother Native
Driver.
Installation of Brother Native Drivers for Windows®XP
BeforeYou begin
• Please complete steps 1 to 7 of the “Setting Up the machine and PC to Work Together” before you install the Brother Native Driver.
• Make sure that the interface cable is connected between the machine and your PC and they are both powered ON.
Step 8.
Click “Start”and select “Printers and Faxes”
Step 9.
Click on “Add a printer”and the Add Printer Wizard will start.
1. When the above screen appears,
click Next.2. Un-check the “Automatically detect
and install the Plug and Play
printer” selection and then click
Next.
3. Select “BMFC (Brother MFL Port)”
from the pull down window for the
Printer Port Selection and then click
Next.
4. Click on Have Disk.
5. Browse the CD-ROM and highlight
your language folder and click Open.
Highlight the “WXP” folder and click
Open. Highlight the “Addprt” folder
and click Open.
6. Click Open.7. Make sure “X:\xxx\WXP\Addprt” is
displayed in the window and click OK
(X:\ is the drive letter of your
CD-ROM).
8. Highlight the model you are installing
from the list of machines and click
Next.
9. If the above screen appears select
“Replace existing driver” and Next.
4
1. To activate Faxing receiving, click Set
up faxing in the PrinterTasks menu. 2. The FAX services will be installed on
your PC. 3. A Fax icon will then appear in the
Printers and Faxes folder. If Fax
icon does not appear, click Install a
local fax printer in the Printer tasks
menu.
4. Select the Start, All Programs,
Accessories, Communications,
Fax, Fax Console.
Note: If you have not configured your
fax connection, the screen for your
local information will be displayed.
Enter your details, ensuring you
specify the outside line access
number if necessary and click OK.
Select the My location radio button if
it is not selected and then click OK.
6. Enter the sender information, and
then click Next.
5. The Fax Configuration Wizard
starts. Click Next.7. Select fax device you use in the
Please select the fax device
pull-down list.Click to select the
Enable Receive check box. Specify
the number of rings before your MFC
will attempt to answer the fax. Click
Next.
10. Select if you print a received fax or
save it in a folder, and then click
Next.
8. Enter the Transmitting Subscriber
Identification (TSID), and then click
Next.
9. Enter the Called Subscriber
Identification (CSID), and then click
Next.
11. Click Finish.
The PC-FAX installation is now
complete.
Note: When PC-FAX Receiving is active, you cannot run the Remote Setup utility.To use Remote Setup, check
off Enable Receive in item 7 of Step 10.
For information on how to use PC-FAX Sending and Receiving, please refer to Help in the Fax Console.
Setting Up and Using PC-FAX Receiving
(For the MFC-9660 and MFC-9880)
Before you can start receiving faxes, please install the appropriate Windows XP driver (Windows XP In-box driver or Brother Windows XP driver). After the driver is installed, refer to the
following information to configure your Windows XP PC for Fax receiving.
Step 10.
Setting Up Your PC
5
WIA compliant Scanning
Windows®XP uses Windows Image Acquisition (WIA) for scanning images from the MFC.You can scan images directly into the PaperPort®viewer that Brother included with your
MFC or you can scan images directly into any other software application that supports WIA or TWAIN scanning.
For the MFC-9070 and MFC-9660
The following Scan dialog box will appear:
1. Paper source:
You can select scanning from the Flatbed or Document Feeder.
2. Type of picture
Select the type of picture you are scanning.
3. Quality of the scanned picture
You can adjust Brightness, Contrast, Resolution and Picture type.
4. Page size:
If the paper source is set to Document Feeder you can select the Page size that will be scanned.
Install Software
You can install printer and scanner drivers and the various utility items.
Manuals
View the Owner’s Manual and other documentation.
Brother Solutions Centre
Get all contact you need if you have to get in touch with our solutions centre.
Further information
Interactive Demonstration showing features of the Printer Driver.
You can get a variety of information from this CD-ROM
What is included on the CD-ROM
Trademarks
The Brother logo and MFC Software Suite are registered trademarks of Brother Industries, Ltd.
© Copyright 2002 Brother Industries, Ltd.All rights reserved.
Windows and Microsoft are registered trademarks of Microsoft in the U.S.and other countries.
For the MFC-580, MFC-590, MFC-9160, MFC-9180,
MFC-9760 and MFC-9880
The following Scan dialog box will appear:
1
3
2
4
1
3
2
4
This manual suits for next models
7
Table of contents
Other Brother All In One Printer manuals
Brother
Brother DCP-395CN Safety guide
Brother
Brother DCP-T300 Assembly instructions
Brother
Brother MFC-885CW User manual
Brother
Brother MFC-J825DW Assembly instructions
Brother
Brother MFC-8440 Safety guide
Brother
Brother MFC-J4310DW User guide
Brother
Brother MFC-J825DW User guide
Brother
Brother DCP-145C User manual
Brother
Brother MFC-215C User manual
Brother
Brother MFC-J220 User guide
Brother
Brother MFC-9840CDW User manual
Brother
Brother ADS-2100e User manual
Brother
Brother DCP-7057 User manual
Brother
Brother MFC-J3520 User manual
Brother
Brother DCP-7030 User manual
Brother
Brother DCP-J1800DW Operating manual
Brother
Brother MFC-9*970CDW Operating and maintenance manual
Brother
Brother MFC-9*970CDW User manual
Brother
Brother MFC-9560CDW Operating and maintenance manual
Brother
Brother MFC-J6930DW User manual
Popular All In One Printer manuals by other brands
Triumph Adler
Triumph Adler DC 2016 Instruction handbook
Epson
Epson WorkForce WF-2510 Basic guide
Epson
Epson Stylus Scan 2000 Product information guide
Epson
Epson PictureMate Snap PM 240 Start here
Konica Minolta
Konica Minolta bizhub C35 user guide
Konica Minolta
Konica Minolta BIZHUB 558 Quick reference guide
