Brodit 711032 User manual

Product 711032

711032 Passive holder with tilt swivel Adjustable holder. Fits for devices with and without original skin.

Keep your phone in a passive holder and you will always have it within easy sight and reach! Neat, discreet and

convenient.

Adjustable holder for use with the bare device, or the device with original skin (which is included with the phone).

Before using the holder you set the holder's width so it suits your device with or without skin. You have full access

to the camera and all buttons and outlets when the device is in the holder. You can connect a charging cable or

portable handsfree to the device when it is in the holder. The holder has a neat and discreet design which blends

well with the vehicle's interior.

The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between

portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with AMPS-holes. Made of

high grade ABS/Acetal plastic. Color: black. Made in Sweden. Attach onto ProClip Mounting Platform.

EAN: 7320287110326

Item no 711032 fits:

Huawei Mate 10 Pro (For all countries)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read all of the instructions and look at the pictures before attaching the holder.

1. To adjust the holder to fit for your device with or without skin: Loosen the screws on the front side of the holder

slightly. Pull out the sides of the holder slightly. Place the device in the holder and press the sides together so the

device is firmly in place. Remove the device carefully without changing the position of the sides. Tighten the

screws on the front side of the holder.

2.To install the holder: Loosen the screw in the center of the holder so you can remove the tilt swivel attaching

plate on the back.

3. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed

screws. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw

until the holder is firmly in place, but still can be adjusted.

4. The holder is in place.

Table of contents

Other Brodit Automobile Accessories manuals

Brodit

Brodit ProClip 804400 User manual

Brodit

Brodit ProClip 855007 User manual

Brodit

Brodit Mobile Phones User manual

Brodit

Brodit ProClip 854570 User manual

Brodit

Brodit 521889 User manual

Brodit

Brodit ProClip 854744 User manual

Brodit

Brodit ProClip 853044 User manual

Brodit

Brodit ProClip 804816 User manual

Brodit

Brodit Monitor Mount User manual

Brodit

Brodit ProClip 854344 User manual

Brodit

Brodit ProClip 854857 User manual

Brodit

Brodit ProClip 804080 User manual

Brodit

Brodit 511277 User manual

Brodit

Brodit 541861 User manual

Brodit

Brodit 804741 ProClip User manual

Brodit

Brodit ProClip 804123 User manual

Brodit

Brodit Passive Holders User manual

Brodit

Brodit ProClip 855058 User manual

Brodit

Brodit 213522 User manual

Brodit

Brodit ProClip 854271 User manual

Brodit

Brodit ProClip 833995 User manual

Brodit

Brodit ProClip 855116 User manual

Brodit

Brodit ProClip 804735 User manual

Brodit

Brodit ProClip 853658 User manual

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Yakima

Yakima 9MM STANDARD BIKE MOUNT instructions

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

Whispbar

Whispbar K085W Fitting instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual