Brodit 516042 User manual

Product 516042

516042 Holder with Pass-Through Connector For a more secure upright and horizontal position. Adjustable

holder, fits devices with skins.

This is the choice for you who are using your iPhone with navigation and easily want to switch between an upright

position and a horizontal position - simply turn the holder into desired position. When installing, place the holder

in the desired position (upright/horizontal) that you will be using as standard. The holder is adjustable and fits

devices with skins. The holder provides a more secure upright and horizontal position than a standard holder.

The holder is equipped with a pass-through connector. This means that all cables that can be used with the

iPhone can also be used with the holder, for example a charging cable or an interface cable. When you have

attached the cable to the holder it is firmly in place and you do not have connect it manually to the device each

time you put the iPhone in the holder. You can run the cable through the back part of the holder for a cleaner

look. (Cable not included)

The holder is attached to a tilt swivel, this means you can adjust the angle of the device in order to avoid light

reflection on the screen. Attach onto ProClip Mounting Platform.

EAN: 7320285160422

Item no 516042 fits:

Apple iPhone 3G (For all countries)

Apple iPhone 3GS (For all countries)

1(2)

1. 2.

INSTALLATION INSTRUCTIONS

4.3.

Please read all of the instructions and look at the pictures before attaching the holder.

1. To adjust the holder to your unit: Loosen the screws on the back side of the holder, so the sides of the holders

can be adjusted. Place the unit in the holder and press the sides together so the unit is firmly in place. Screw on

the screws on the back side of the holder.

2.To install the holder. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching

plate on the back. Place the attaching plate on desired position. Screw the attaching plate into place with the

enclosed screws. Place the holder over the attaching plate so the tilt swivel fits. Screw the holder onto the

attaching plate. You can easily switch between an upright and a horizontal position, simply by turning the holder

into desired position.

3. To place the device in the holder: Place the bottom part of the device into the holder. Press the top of the

device forward and in the same time slide the device downward into place in the holder.To remove the device

from the holder: Press the upper part of the holder forward. When the device is set free, lift it upward out of the

holder.If you are using a cable to your device: Press the cable into place in the cable holder in the bottom part of

the holder. The cable will then be held in place giving a neat installation.

4. The holder is in place.

2(2)

Table of contents

Other Brodit Automobile Accessories manuals

Brodit

Brodit 712079 User manual

Brodit

Brodit ProClip 854210 User manual

Brodit

Brodit ProClip 854809 User manual

Brodit

Brodit ProClip 804692 User manual

Brodit

Brodit 727002 User manual

Brodit

Brodit ProClip 855170 User manual

Brodit

Brodit 511255 User manual

Brodit

Brodit 855136 ProClip User manual

Brodit

Brodit 739003 User manual

Brodit

Brodit ProClip 654877 User manual

Brodit

Brodit ProClip 852057 User manual

Brodit

Brodit 712026 User manual

Brodit

Brodit 804166 ProClip User manual

Brodit

Brodit ProClip 854733 User manual

Brodit

Brodit ProClip 833995 User manual

Brodit

Brodit ProClip 852426 User manual

Brodit

Brodit Getac T800 User manual

Brodit

Brodit ProClip 854744 User manual

Brodit

Brodit ProClip 854885 User manual

Brodit

Brodit 213460 User manual

Brodit

Brodit ProClip 855038 User manual

Brodit

Brodit ProClip 854985 User manual

Brodit

Brodit ProClip 835012 User manual

Brodit

Brodit ProClip 853267 User manual

Popular Automobile Accessories manuals by other brands

James Baroud

James Baroud Odyssey user guide

Motorola

Motorola i50sx owner's manual

Yakima

Yakima 9MM STANDARD BIKE MOUNT instructions

Feniex

Feniex T3 instruction manual

Renault

Renault 77 11 423 180 Installation instruction

Kia

Kia E8300-4D000 manual

Brink

Brink 756843 installation instructions

Whispbar

Whispbar K085W Fitting instructions

v.link

v.link CI-VL2-PC-HSD manual

Viking

Viking Stack-Rack Assembly and use instructions

Aries

Aries 203015 installation manual

Choetech

Choetech AT0005 user manual

ZZ2

ZZ2 ZZAIR-PRO instruction manual

Holman

Holman 4A80L installation guide

Thule

Thule 2075 parts manual

Motorola

Motorola T325 quick start guide

TAUBENREUTHER

TAUBENREUTHER 16-3950 FITTING INSTRUCTION

DV8

DV8 FBJL-02 Product installation manual