Brivis Touch User manual

Brivis Touch

Owner’s Manual

Congratulations on purchasing a Brivis Touch Comfort Controller. This

intelligent Controller can be used with a range of Brivis heating and

cooling products.

The Brivis Touch allows you to maximize the performance of your

heating and cooling system with customized comfort control.

The Brivis Touch Controller can operate in many configurations, for

example:

•a single Touch Controller with a single Brivis comfort system

•a single Touch Controller with multiple Brivis comfort systems

•a single Touch Controller with single or multiple room temperature

sensors

•multiple Touch Controllers

The Brivis Touch Controller also facilitates either Single Temperature

Set Point (STSP) or Multi Temperature Set Point (MTSP) control of

zoned systems.

Your Brivis designer / installer will advise you on the appropriate

configuration and operation of your system. Please also refer to any

Owner’s Manuals accompanying each of your Brivis products.

Follow the step-by-step instructions in this guide to begin enjoying the

benefits of your Brivis climate system.

Specifications subject to change without notice.

Pictures for illustration purposes only.

Table of Contents

1.0 Quick Reference Guide................................................................. 1

2.0 Quick Start Guide.......................................................................... 3

3.0 Fan Operation............................................................................... 3

4.0 Heating – Manual Operation ......................................................... 4

4.1 Heating – Program Schedule Operation........................................ 4

5.0 Cooling – Manual Operation.......................................................... 5

5.1 Cooling – Program Schedule Operation ........................................ 5

6.0 Evaporative Cooling – Manual Operation ...................................... 6

6.1 Evaporative Cooling – Pump Only Operation ................................ 7

6.2 Evaporative Cooling – Fan Only Operation ................................... 7

6.3 Evaporative Cooling– Auto Operation ........................................... 7

6.4 Evaporative Cooling – Timer Operation......................................... 7

6.5 Evap Timer ON – Manual / Auto.................................................... 8

6.6 Evap Timer OFF – Manual / Auto.................................................. 9

6.7 Evap Timer Cancel or Change .................................................... 10

7.0 Zoning (where installed).............................................................. 10

7.1 Single Temperature Set Point Zoning (STSP)............................. 10

7.2 Multi Temperature Set Point Zoning (MTSP)............................... 10

8.0 Menu .......................................................................................... 11

9.0 User Preferences........................................................................ 11

9.1 System Lockout Control.............................................................. 12

9.2 General Settings ......................................................................... 12

9.3 System Settings .......................................................................... 13

9.4 Set Zone Names ......................................................................... 14

10.0 Clean Screen ............................................................................ 14

11.0 Schedule................................................................................... 15

12.0 Set Day/Time ............................................................................ 16

13.0 Service Notification Message .................................................... 16

14.0 Outdoor Temperature Sensor (Optional) ................................... 17

15.0 Error Messages......................................................................... 17

16.0 Power Outages ......................................................................... 17

17.0 Glossary.................................................................................... 18

1.0 Quick Reference Guide

Diagram

: Heating screen in Manual Operation

Room temperature sensor active

System Mode/Run indicator

Zones

(Where Fitted)

Mode Selector

ON/OFF

Digital Clock

Manual or Schedule

M – Master Controller

Day

Fan Only mode

Display Options or Settings

Fan Status Indicator

Current System Mode

Room / Zone Temperature

Zone ID

(where fitted)

Diagr

: Refrigerated Cooling Screen

Diagram

: Evaporative Cooling Screen

Pump OnFan On

Timer OnTimerManual / Auto

2.0 Quick Start Guide

The quick start procedure, as outlined below, allows you to begin using

your system before you learn all the details of system operation.

1. Activate the Brivis Touch Controller by touching anywhere

on the LCD screen.

2. Select the required mode by pressing the “MODE” button

(where more than one option is available – i.e. HEAT, COOL

or EVAP).

3. Turn on the system by pressing the “ON/OFF” button.

4. Select the desired temperature / comfort level by using the

“UP/DOWN” buttons.

5. System will run at desired comfort level until turned OFF by

pressing the “ON/OFF” button.

You may access User Preferences and other advanced options by

pressing the “MENU” button.

3.0 Fan Operation

FAN ONLY

With the system OFF (standby) push the “FAN” button in the top right

hand corner to turn the fan ON.

If in ‘HEAT’ or ‘COOL’ mode the heater fan will turn on.

If in ‘EVAP’ mode the evaporative cooler fan will turn on.

CIRCULATION FAN

When enabled by the installer, the circulation fan will be on

continuously between Heating and Refrigerated Cooling cycles.

CIRC FAN will be indicated below the FAN icon.

4.0 Heating – Manual Operation

To operate your heating system with full manual control, activate the

Controller by touching the LCD screen, select HEAT using the MODE

button, turn system on using the ON/OFF button, and set the desired

temperature. The system will operate to maintain the desired

temperature level until turned OFF.

4.1 Heating – Program Schedule Operation

The Brivis Touch Controller uses default ‘energy saver’ HEAT settings

that helps reduce your heating expenses.

To operate your Heating system with the Schedule, activate the

Controller by touching the LCD screen, select HEAT using the MODE

button, turn system on using the ON/OFF button, and press the

“Schedule” button. The system will operate automatically to maintain

the desired temperatures as programmed in the program Schedule.

Advance to next Period

If you leave or arrive home early, you may skip to the next schedule

period by pressing the current period displayed, e.g. .

The program schedule will automatically resume once one of the

following occurs:

•The next time period begins.

•The “Cancel” button is pressed.

•The Temporary period is pressed.

Note:

Time period “

Pre

Sleep

” can be enabled in the “User

Preferences” > ”System Settings” > ”Pre-Sleep Option”. To

customise your “Schedule” settings to suit your lifestyle, please

see section “User Preferences” > “System Settings” > ”Schedule

Settings”.

Diagram

: Heating ON – Schedule home screen

Diagram

: Heating Advance Period

Temporary Temperature Override

To temporarily adjust the temperature, simply adjust the temperature

level with the UP/DOWN arrows. The program Schedule will

automatically resume once one of the following occurs:

•The next time period begins.

•The “Cancel” button is pressed.

The word “Temporary” will flash on the screen.

5.0 Cooling – Manual Operation

To operate your Refrigerated Cooling system with full manual control,

activate the Controller by touching the LCD screen, select COOL using

the MODE button, turn system on using the ON/OFF button, and set

the desired temperature. The system will operate to maintain the

desired temperature level until turned OFF.

5.1 Cooling – Program Schedule Operation

The Brivis Touch Controller uses default ‘energy saver’ COOL settings

that helps reduce your refrigerated cooling expenses.

To operate your Refrigerated Cooling system with the program

schedule, activate the Controller by touching the LCD screen, select

COOL using the MODE button, turn system on using the ON/OFF

button, and press the SCHEDULE button. The word COOL will appear

on the screen. The system will operate automatically to maintain the

temperatures as programmed in the Schedule.

Note:

Time period “

Pre

Sleep

” can be enabled in the “User

Preferences” > ”System Settings” > ”Pre-Sleep Option”. To

customise your “Schedule” settings to suit your lifestyle, please

see section “User Preferences” > “System Settings” > ”Schedule

Settings”.

Diagram

: Heating Temperature Override

Advance to next Period

If you leave or arrive home early, you may skip to the next schedule

period by pressing the current period displayed, e.g. .

The program schedule will automatically resume once one of the

following occurs:

•The next time period begins.

•The “Cancel” button is pressed.

•The Temporary period is pressed.

Temporary Temperature Override

To temporarily adjust the temperature, simply adjust the temperature

level with the UP/DOWN arrows. The program Schedule will

automatically resume once one of the following occurs:

•The next time period begins.

•The “Cancel” button is pressed.

The word “Temporary” will flash on the screen.

Diagram

: Cooling ON – Schedule home screen

Diagram

: Cooling Temperature Override

Diagram

: Cooling Advance Period

6.0 Evaporative Cooling – Manual Operation

To operate your Evaporative Cooling system with full manual control,

activate the Controller by touching the LCD screen, select EVAP using

the MODE button, turn system on using the ON/OFF button. When the

Evaporative Cooler turns on for the first time the PUMP and FAN will

be on, indicated by the light blue colour buttons. Set the desired FAN

SPEED level with the UP/DOWN arrows. The system will operate until

turned OFF.

6.1 Evaporative Cooling – Pump Only Operation

While in Manual Operation, press the FAN icon to disable the fan.

The PUMP icon will remain illuminated, the FAN icon will not. Only the

pump will be running in this mode and no air will be circulating.

6.2 Evaporative Cooling – Fan Only Operation

While in Manual Operation, press the PUMP icon to disable the

pump. The FAN icon will remain illuminated, the PUMP icon will not.

Only the fan will be running in this mode.

6.3 Evaporative Cooling– Auto Operation

To operate your Evaporative Cooling system so that it automatically

maintains your desired comfort level, activate the Controller by

touching the LCD screen, select EVAP using the MODE button, turn

system ON using the ON/OFF button, press the “AUTO” button, set the

desired comfort level using the UP/DOWN arrows. The system will

automatically regulate the pump and fan speed to maintain your

desired comfort level.

The darker bars represents a cooler comfort level requirement, refer

Diagram 11.

6.4 Evaporative Cooling – Timer Operation

The “Timer” option allows access to the evaporative cooler program to

turn the system ON or OFF for Manual or Auto operation. The timer

can be set within the next 24 hour period by selecting the time of day

for it to activate.

Diagram

: Evaporative Cooling Manual Operation

Diagram

: Evaporative Cooling Auto Operation

Table of contents

Other Brivis Thermostat manuals

Brivis

Brivis TH4110 User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide