Bricon SPEEDY User manual

User Guide
United Kingdom
version UK-02
SPEEDY
BRICON nv
Europark Oost 15C, 9100 Sint-Niklaas, Belgium.
Tel: +32 3 777 39 74 Fax: +32 3 778 07 35

SPEEDY 2
THE SPEEDY is intended for the electronic timing of racing pigeons.
THE SPEEDY should only be used for the purpose that it is intended.
Protect THE SPEEDY against water and extreme sunlight and temperatures..
Modifications reserved.

Index:
Page
1. Installation.
1.1. Foreword. 4
1.2. Unpacking the installation. 4
1.3. Assembly of the electronic timing system. 4
2. Connect the electronic timing system.
2.1. Before you can clock. 6
2.2. Exploring the menu for the first time. 6
2.3. Programming the antennas. 7
2.4. Testing the antennas. 8
2.5. Install the antennas. 9
2.6. Connect and test the electronic observation system. 12
3. Speedy, a quick start .
3.1. Linking birds. 13
3.2. Browse pigeons. 13
3.3. Add/edit fanciers. 14
3.4. Clocking. 14
3.5. Basketing. 15
3.51. With a Bricon Club-Master. 15
3.52. With a club antenna. 15
3.6. Read out. 17
4. Other functions.
4.1. PC-Connection. 18
4.2. Printing. 18
4.3. Races. 18
4.4. Set Date / Time. 19
5. Unives 1.7 19
6. Maintenance and Service. 19
7. Technical data. 19
8. Declaration of conformity. 20
SPEEDY
3

1. Installation
1.1. Foreword.
Thank you for your trust and confidence in BRICON.
This manual will give a detailed explanation of the functions of the Speedy.
BRICON wish you much enjoyment with your purchase.
1.2. Unpacking the installation.
A Speedy pack contains:
1. Speedy (ETS)
2. Speedy Carrying case
3. Holder
4. Loft antenna
5. Loft antenna cable
6. Cable for connecting antenna (short cable)
7. The power supply (12 volt transformer)
1.3. Assembly of the electronic timing system.
Attention : The first thing that one must do is to program or number the antennas (page 7).
If using more than one antenna, link the antennas together using the cables provided.
These cables have a 9-pin connection on both ends (male and female).
Connect the Speedy in the same way and finally connect the power supply. Where possible, connect
the power supply into the centre of the installation. The standard power transformer supplied is
1500mA. The power consumption of the Speedy and the antenna pads can be found on each item, and
it should be noted that installations with multiple antenna pads may need an additional power supply.
After completion, the red light on the antenna connection will light up and the Speedy will start up.
If this fails to happen, there is a cable failure or a power supply problem and these should be checked.
A diagram of the installation appears on page 5, which should be studied before installing the system.
It is possible to purchase extension cables if necessary, which can be obtained from your local dealer.
If a large number of antenna pads are connected, then an end plug will need to be connected.
If you have any questions regarding the installation please connect your Bricon dealer.
SPEEDY 4
12345,6
7

SPEEDY
5
M
FMF
1 = Speedy
2 = Holder
3 = Power supply (12 volt transformer)
4 = Antenna
5 = The Antenna connection
6 = End plug
M = Male (pins)
F = Female
1
2
3
44
56

2. Assembly of the system
2.1. Before you can clock.
Before you can time pigeons, you must go through the following steps:
-First of all you must program the antenna pads (see 2.4).
-After programming the antennas, the installation can then be completed by connecting the
antennas pads to each other.
-The ring numbers of the birds can then be linked to the electronic chip rings (see 3.1).
2.2. Exploring the Speedy menu.
After connecting the clock to the antennas, you can plug the power supply into the antenna
connector, and the red power light will show (2).
After initialisation you see the following screen on the Speedy (fig 1.) .
The Speedy is very easy to use with only four buttons on the keypad which completely
control the functionality. The four keys are as follows -
SPEEDY 6
2
1Fig. 1
Antenna connection Date Time
Version
<PREVIOUS>
This button is used for
returning or decrement.
<NEXT>
This button is used for
forwarding or to
increment.
<C>
To stop an action, undo
or to select “No”.
<OK>
To confirm an action,
To continue an item or
to select “Yes”.

2.3. Programming antennas.
Before you use the clocking system, you must program or number the antennas, giving each antenna
on your system a different number. Each antenna when delivered has a default setting of number 1.
Connect Speedy to just one antenna at a time.
SPEEDY
7
Speedy is menu driven.
The complete functionality of Speedy is accessed through a menu-structure using 13 different items.
All items are graphically presented by an icon, which are set up in order of frequent use.
The icon required should be positioned in the centre of the Speedy display using the orange navigation
buttons, and then accessed by pressing the <OK> button.
Listed below you will find each of the icons and its function.
Clocking
Basketing
Races
Read out
Antenna test
Delete
Antenna prog.
Print overview
Print clocking
Linking birds
Add/edit fancier
Browse pigeons
Set date-time
By pressing the <C> button you can see a text explanation of the icon.
Antenna cable

SPEEDY 8
Select ‘Antenna progr.’ (fig. 1) and confirm with <OK>.
Please Note: By pressing the <C> button,
the reference text hidden behind the icon appears.
Speedy prompts with the number 1. With the orange buttons <NEXT> or <PREVIOUS> this
number can be changed. Choose a number from 1 to 4 and confirm with <OK>.
Speedy starts programming the antenna and once finished (programming OK) push <OK> to
return to the main menu. The Speedy is now ready to program the next antenna.
Attention! Each antenna in the system must be allocated a different number from 1 to 4.
2.4. Antenna test.
To test the detection quality of the antennas select ‘Antenna test’ (fig 2) and press <OK> .
Please Note: By pressing the <C> button,
the reference text hidden behind the icon appears.
Speedy will indicate the number of antennas found. When you hold a ring over the antenna pad
the Speedy will start beeping. This allows you to see if the antenna installation is done properly
and the registration quality is good.
Speedy should beep if the chip-ring is held at a height of 5 to 6 cm (2 to 3 inches).
Fig.1
Fig. 2
Testing with 01 Ant.
7909DFFAEFChip ring number
Antenna test mode
Antenna number

2.5. Installing the antennas.
The antennas are connected to each other in line using connection cable. Each antenna pad has an
integral cable attached of 1.80 m. The Speedy clock should be connected to the antennas.
An end plug should be connected to the final antenna in circumstances where more than four antenna
pads are connected together in the system.
As the signal will pass through most materials, it is possible to install the antenna either above or
beneath the entrance board of the loft (with a recommended thickness of no more 15mm).
The entrance hole to the loft must be 2 cm smaller than the width of the antenna pad.
Bricon produce a range of antenna pads to meet the needs of any loft, supplying pads in widths of
14 cm, 28 cm, 50 cm and 70 cm. The BRICON antenna will record over the entire width of the pad
and therefore tunnels are not needed. It is advisable however to slow down the pigeons before they
enter onto the antenna. It is advisable to install the antenna pads at least 1 metre away from each other.
Within the surrounds of the antenna pad, metal is not allowed (either under and above the antenna).
Antenna under the dropping board and before the bob wires
SPEEDY
9
Front view
Landing board
Antenna
Clocking area
Min. 11cm.
Top view
Landing board
5 cm.
Clocking area
Cable
Bob wire
Bob wire
Antenna
Loft
Outside
Attention ! Install the antenna with the cable outside

Antenna pad inside of the entrance and behind the bob wire
With tunnel Without tunnel
SPEEDY 10
Top view
5 cm.
Clocking area
Cable Antenna
Loft
Outside
Bob wire
With BRICON antenna pads a tunnel is not necessary.
In the most cases tunnels prove to be a big disadvantage, with pigeons compressed
into the entrance with jams occurring as a consequence.
Tunnel
Tunnel
Pigeon entrance Pigeon entrance
Pigeon entrance
Landing board
Bob wire Bob wire
Attention ! Install the antenna with the cable outside
Other manuals for SPEEDY
2
Table of contents
Other Bricon Clock manuals
Popular Clock manuals by other brands
Silicon Laboratories
Silicon Laboratories SI5324 manual

Heathkit
Heathkit GC-1005 Assembly manual

Oregon Scientific
Oregon Scientific PRYSMA RMR221P manual

Andrew O'Malley
Andrew O'Malley DOTKLOK Assembly instructions

ALGE-Timing
ALGE-Timing ASC3 manual

Bodet
Bodet Profil 960 Installation and operating instructions

Progetti
Progetti KALIMERO Directions

La Crosse Technology
La Crosse Technology WT-3141b Quick setup instructions

La Crosse Technology
La Crosse Technology W86531 owner's manual

Sharp
Sharp SPC900 instruction manual

La Crosse Technology
La Crosse Technology 404-50447 quick start guide

Datexx
Datexx DF0063 quick guide





