Braun 7 series Configuration guide

Braun Series7 Electric

Shaver Cleaning

Instructions

Braun GmbH

2 Braun Series7 Electric Shaver Cleaning Instructions

Table of Contents

Overview 2

The Braun Series7 Electric Shaver 3

The Dry Brush Tool 3

Cleaning the Shaver Using the Dry Brush Tool 3

The Clean and Renew Station 4

Cleaning the Shaver Using the Clean and Renew Station 5

Replacing the Clean and Renew Cartridge 6

Overview

To ensure a close shave and efficient operation of the Braun Series7 shaver, you must clean

the shaver regularly. The Braun Series7 cleaning system offers the user two cleaning

options:

•A dry brush tool to gently remove shaving stubble debris from the foil cutting unit

and pivoting shaving head base.

•A thorough cleansing bath using the Clean and Renew Station to completely wash

and lubricate all the pivoting and shaving head mechanisms.

The Braun Series7 cleaning system is comprised of the following parts displayed in Figure 1

below.

Figure 1: The Braun Series7 Cleaning System

Clean and Renew

Station

Dry Brush Tool

Clean and Renew

Cartridge

AC Power Cord

Series7 Shaver

3 Braun Series7 Electric Shaver Cleaning Instructions

The Braun Series7 Electric Shaver

The Braun Series7 electric shaver features a pivoting foil cutting head for grooming and an

LCD display to show the battery charge and cleaning levels. The details of the Braun Series7

shaver are displayed in Figure 2 below.

Figure 2: The Braun Series7 Electric Shaver

The Dry Brush Tool

The dry brush tool provides a rapid way of removing stubble and debris from the foil cutting

unit and pivoting shaving head base. The dry brush cleaning option should be performed

after every shave. The dry brush tool is displayed in Figure 3 below.

Figure 3: The Dry Brush Tool

Cleaning the Shaver Using the Dry Brush Tool

To clean the foil cutting unit and pivoting shaving head base using the dry brush tool:

1. Press the release buttons on both sides of the pivoting shaving head base (see Figure

4). The foil cutting unit releases.

Figure 4: Release Buttons

Foil Cutting Head On/Off Button

LCD Hygiene and

Battery Dial

4 Braun Series7 Electric Shaver Cleaning Instructions

2. Remove the foil cutting unit from the pivoting shaving head base.

3. Sweep the stubble and debris from the foil cutting unit (see Figure 5) and pivoting

shaving head base (see Figure 6) using the dry brush tool.

4. Blow any remaining stubble or debris away from the foil cutting unit and pivoting

shaving head.

Figure 5: Cleaning the Foil Cutting Unit Figure 6: Cleaning the Shaving Head Base

5. Push down on the foil cutting unit until it clicks into the pivoting shaving head base.

Note: The click indicates the foil cutting unit is locked into position.

The Clean and Renew Station

The Clean and Renew Station provides a thorough washing and lubrication of all shaving

head mechanisms. This is accomplished by flushing out stubble and debris from moving

parts using an alcohol based solution. In order to maintain efficient operation of the shaver,

this cleaning option should be performed regularly. The Clean and Renew Station also

automatically selects the appropriate cleaning level program and charges the shaver

battery. The details of the Clean and Renew Station are displayed in Figures 7 and 8 below.

Figure 7: Front Side Figure 8: Right Side

Reservoir

Opening

Start Cleaning

Button

Fluid Status

Lights

Clean and

Renew

Cartridge

Cleaning Level

Lights

AC Power

Cord Outlet

5 Braun Series7 Electric Shaver Cleaning Instructions

Cleaning the Shaver Using the Clean and Renew Station

To clean the shaving head mechanisms using the Clean and Renew Station:

1. Insert the smaller plug of the AC power cord into the AC power cord outlet on the

back side of the Clean and Renew Station (see Figure 9) and the larger plug into a

standard AC wall outlet (see Figure 10).

Figure 9: Small AC Plug Figure 10: Large AC Plug

2. Insert the Braun Series7 shaver upside down into the Clean and Renew reservoir

opening at the top of the station.

Note: If the shaver is properly seated inside the reservoir cavity, one of three cleaning

level lights illuminates on the right side of the Station. The proper seating of the

shaver inside the Clean and Renew Station is displayed in Figure 11 below.

Figure 11: Shaver Cleaning Configuration

6 Braun Series7 Electric Shaver Cleaning Instructions

3. Press the start cleaning button to begin the cleaning cycle. The Clean and Renew

Station begins cleaning the pivoting shaving head by intermittently switching the

shaver on and off while filling the reservoir cavity with cleaning solution.

Note: Once the wet cycle has completed, the Clean and Renew program gently dries

the pivoting shaving head mechanisms and charges the shaver battery. During the

wet and dry cleaning cycles, the LCD hygiene dial segments darken as the shaver

completes each step of the cleaning cycle. Once the wet and dry cycles complete, the

clean status light illuminates on the upper right side of the Clean and Renew Station.

The LCD battery dial segments also darken to indicate charging status.

Figure 12: LCD Hygiene and Battery Dial

4. Remove the shaver from the reservoir cavity after the battery has fully charged.

Replacing the Clean and Renew Cartridge

The Clean and Renew Cartridge is a hard plastic tank that contains the alcohol based

cleaning solution needed to wash and lubricate the pivoting shaving head mechanisms.

After several cleaning cycles, the cleaning solution becomes exhausted. You must replace

the cartridge when the empty fluid status light is illuminated on the left side the Clean and

Renew Station. The Clean and Renew Cartridge is displayed in Figure 13 below.

Warning: The Clean and Renew Cartridge is filled with a highly flammable alcohol solution

that must be kept away from all heat sources.

Figure 13: Clean and Renew Cartridge

Battery Status

Segments

Shaver Hygiene

Status Segments

7 Braun Series7 Electric Shaver Cleaning Instructions

To replace the Clean and Renew Cartridge:

1. Press the Clean and Renew Station housing release button located on the left side of

the unit (see Figure 14).The top housing will unlock and slide up (see Figure 15).

Figure 14: Housing Release Button Figure 15: Unlocked Station

2. Slide out the old cleaning fluid cartridge (see Figure 16).

Figure 16: Sliding Out Old Cartridge

3. Drain the contents of the spent cartridge and dispose of the empty plastic tank.

Housing

Release Button

Fluid Status

Lights

Clean and Renew

Station Housing

Clean and Renew

Cartridge

8 Braun Series7 Electric Shaver Cleaning Instructions

4. Carefully remove the cap from the new Clean and Renew cartridge.Avoid spilling any

cleaning fluid.

Figure 17: Removing the Cap

5. Slide the new Clean and Renew cartridge into the bottom of the Clean and Renew

station base.

Figure 18: Sliding in New Cartridge

6. Push down on the Clean and Renew Station housing until it locks into position with a

click.

Other manuals for 7 series

Table of contents

Other Braun Electric Shaver manuals

Popular Electric Shaver manuals by other brands

Philips

Philips MicroAction 4402LC Specifications

Philips

Philips HQ7740 user guide

Philips

Philips Norelco BG2022 Bodygroom Specifications

Norelco

Norelco Quadra 7610X owner's manual

Philips

Philips 7616X manual

Philips

Philips HQ802 Specifications

Philips

Philips HQ7363/17 user manual

Philips

Philips NORELCO S7371 manual

Daga

Daga MT-400 Directions for use

Philips

Philips RQ119x manual

Remington

Remington BHT100 user manual

Philips

Philips Bodygroom BG2000 brochure

Kompernass

Kompernass KH 5537 operating instructions

Remington

Remington BHT6100 manual

Philips

Philips qc5365 user manual

MIA

MIA Aqua Body manual

Philips

Philips NORELCO AT880 user manual

Matheo

Matheo MLR 15 manual