B+K precision 2511 User manual

Model: 2511, 2512, 2515, 2516

2510 Series Handheld Digital

Storage Oscilloscopes

USER MANUAL

Safety Summary

The following safety precautions apply to both operating and maintenance

personnel and must be observed during all phases of operation, service,

and repair of this instrument. Before applying power, follow the

installation instructions and become familiar with the operating

instructions for this instrument.

If this device is damaged or something is missing, contact the place of

purchase immediately.

This manual contains information and warnings that must be followed to

ensure safe operation as well as maintain the meter in a safe condition.

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE

Do not operate the instrument in the presence of flammable gases or

fumes. Operation of any electrical instrument in such an environment

constitutes a definite safety hazard.

KEEP AWAY FROM LIVE CIRCUITS

Instrument covers must not be removed by operating personnel.

Component replacement and internal adjustments must be made by

qualified maintenance personnel. Disconnect the power cord before

removing the instrument covers and replacing components. Under certain

conditions, even with the power cable removed, dangerous voltages may

exist. To avoid injuries, always disconnect power and discharge circuits

before touching them.

DO NOT SUBSTITUTE PARTS OR MODIFY THE INSTRUMENT

Do not install substitute parts or perform any unauthorized modifications

to this instrument. Return the instrument to B&K Precision for service and

repair to ensure that safety features are maintained.

WARNINGS AND CAUTIONS

WARNING and CAUTION statements, such as the following examples,

denote a hazard and appear throughout this manual. Follow all

instructions contained in these statements.

A WARNING statement calls attention to an operating procedure, practice,

or condition, which, if not followed correctly, could result in injury or death

to personnel.

A CAUTION statement calls attention to an operating procedure, practice,

or condition, which, if not followed correctly, could result in damage to or

destruction of part or all of the product.

NOTE:

Voltage ratings are given as “working voltage”. They

should be read as Vac-rms (50 –60 Hz) for AC sine

wave applications and as Vdc for DC applications.

WARNING

Do not connect the scope probes and DMM leads simultaneously.

Before using the DMM functions, disconnect all scope probes. Likewise,

disconnect all DMM test leads before using any scope functions.

When not in use, remove all scope probes, DMM test leads, and the USB

cable.

WARNING

To avoid potential fire or shock hazard:

Disconnect all probes, leads, power adapter, and USB cable before

opening the battery cover.

Do not turn on the instrument while the battery cover is removed.

Use only the included insulated probes, test leads, and power adapter

supplied with the instrument.

Use only the battery pack supplied with the instrument or approved by

us. Do not use other substitutes.

For AC power operation, always connect the adapter to the outlet first

before connecting to the instrument.

Observe all markings and ratings on the instrument before connecting

to the instrument.

While making measurements, verify that the performance ratings of

instruments and accessories that are used meet the correct safety levels

of the instrument.

Do not insert metal objects into any of the connectors.

WARNING

Do not use any exposed metal BNC or banana plug connectors with the

instrument. Use only the insulated accessories supplied with the

instrument.

Do not connect the USB cable while the instrument is not in use. Keep

the cable away from all probes and test leads.

Always connect the probes or test leads to the instrument first before

connecting to any other device under test (DUT). To remove,

disconnect them from the DUT first before disconnecting from the

instrument.

Do not operate the instrument in wet environments.

For high voltage testing, keep the BNC connectors and the entire

instrument dry.

Do not apply input voltages above the instrument and the probe’s

voltage rating.

CAUTION

Always cover the DC power input and USB ports on the side of the

instrument with the rubber lid when not in used.

Do not use any abrasive chemicals or volatile liquid when cleaning the

instrument. If using a cloth dampened with water, allow the instrument

to completely dry before reconnecting it.

Compliance Statements

Disposal of Old Electrical & Electronic Equipment (Applicable in the

European Union and other European countries with separate collection

systems)

This product is subject to Directive

2002/96/EC of the European Parliament and

the Council of the European Union on waste

electrical and electronic equipment (WEEE) ,

and in jurisdictions adopting that Directive,

is marked as being put on the market after

August 13, 2005, and should not be

disposed of as unsorted municipal waste.

Please utilize your local WEEE collection

facilities in the disposition of this product

and otherwise observe all applicable

requirements.

CE Declaration of Conformity

The power supply meets the requirements of 2006/95/EC Low Voltage

Directive and 2004/108/EC Electromagnetic Compatibility Directive with the

following standards.

Low Voltage Directive

-EN 61010-1: 2010

Safety requirements for electrical equipment for

measurement, control, and laboratory use-Part 1: General

requirements

-EN 61010-031: 2002+A1: 2008

Part 31: Safety requirements for hand-held probe

assemblies for electrical measurement and test

EMC Directive

-EN 61326-1: 2006

-EN 61000-3-2: 2006+A2: 2009

-EN 61000-3-3: 2008

Safety Symbols

Electrical Shock hazard.

Refer to the operating user manual for warning information to

avoid hazard or personal injury and prevent damage to

instrument.

This symbol shows that the switch is a power switch located at

the front panel. Pressing this button turns on the oscilloscope,

and holding it down for a few seconds turns off the

oscilloscope.

CATI

CATII

Category I overvoltage conditions.

Measurement instruments whose measurement inputs are

not intended to be connected to the mains supply. The

voltages in the environment are typically derived from a

limited-energy transformer or a battery.

Category II overvoltage conditions.

Measurement instruments whose measurement inputs are

meant to be connected to the mains supply at a standard wall

outlet or similar sources.

CATIII

Category III overvoltage conditions.

Measurement instruments whose measurement inputs are

meant to be connected to the mains installation of a building.

Maximum Input Voltages

Oscilloscope Inputs

Maximum input voltage to CH1 and CH2 BNC direct(1:1) - CATII 300V

RMS, CATI 150V RMS

Maximum input voltage to CH1 and CH2 BNC via 10:1 probe PR250SA

(included with models 2515 and 2516) - CATII 1000V RMS, CATIII 600V

RMS

Maximum input voltage to CH1 and CH2 BNC via 1X/10X probe PR150SA

(included with models 2511 and 2512) –CATII 300V RMS

Scope Input –CATII 300V RMS

Meter Input –CATII 600V RMS, CATIII 300V RMS

NOTE:

Voltage ratings are given as “working voltage”. They

should be read as Vac-rms (50 –60 Hz) for AC sine

wave applications and as Vdc for DC applications.

Maximum Floating Voltage

These apply to models 2515 and 2516 only, which have channel isolation

that allows for floating measurements.

Maximum floating voltage from input CH1 and CH2 to earth ground

–CATII 1000V RMS, CATIII 600V RMS

Maximum floating voltage between CH1 and CH2 reference –CATII

1000V RMS, CATIII 600V RMS

The following applies to all models:

Maximum floating voltage from multimeter reference to earth

ground –CATII 600V RMS, CATIII 300V RMS

NOTE:

Voltage ratings are given as “working voltage”. They

should be read as Vac-rms (50 –60 Hz) for AC sine

wave applications and as Vdc for DC applications.

Environmental Conditions

The instrument may be operated in the following environment.

Operating Environment

0 °C to 40 °C

Storage Humidity

0 –85% R.H.

Storage Environment

-20 °C to +70 °C

Pollution degree

Pollution degree 2

Measurement Category CAT II, CAT III

Table of Contents

Safety Summary .............................................................................................. 2

1General Information ............................................................................. 16

1.1 Product Overview........................................................................... 16

1.2 Package Contents........................................................................... 17

1.3 Front Panel Overview..................................................................... 18

Front Panel Description ........................................................................ 18

1.4 Top View......................................................................................... 20

1.5 Rear Panel Overview ...................................................................... 20

1.6 Side Panel Overview....................................................................... 21

Side Panel Description .......................................................................... 21

1.7Display Overview............................................................................ 22

Oscilloscope Display.............................................................................. 22

Digital Multimeter Display .................................................................... 24

Recorder/Trend Plot Display................................................................. 25

1.8 Protection Fuse .............................................................................. 26

1.9 Isolation (Model 2515/2516) ......................................................... 26

1.10 Probes ......................................................................................... 27

2Getting Started...................................................................................... 28

2.1 Input Power Requirements ............................................................ 28

External Power Operation .................................................................... 28

Battery Operation ................................................................................. 29

2.2 Tilt Stand......................................................................................... 30

2.3 Power On Device ............................................................................ 30

2.4 Perform Self-Calibration................................................................. 31

2.5 Set to Factory Default .................................................................... 32

2.6 Configure Date and Time ............................................................... 35

2.7 Probe Compensation...................................................................... 36

3Using the Oscilloscope .......................................................................... 39

This manual suits for next models

Table of contents

Other B+K precision Test Equipment manuals

B+K precision

B+K precision 8500 User manual

B+K precision

B+K precision 575A User manual

B+K precision

B+K precision 2532B User manual

B+K precision

B+K precision 2540C Series User manual

B+K precision

B+K precision 8600 Series User manual

B+K precision

B+K precision 2560 Series User manual

B+K precision

B+K precision 530 User manual

B+K precision

B+K precision 851 User manual

B+K precision

B+K precision 8500 User manual

B+K precision

B+K precision 2530 User manual

B+K precision

B+K precision Sefram MW9092 User manual

B+K precision

B+K precision 1403A User manual

B+K precision

B+K precision 881 User manual

B+K precision

B+K precision 1474 User manual

B+K precision

B+K precision 2190E User manual

B+K precision

B+K precision TL89S1 Instruction Manual

B+K precision

B+K precision 8500B Series User manual

B+K precision

B+K precision 2552 User manual

B+K precision

B+K precision 2194 User manual

B+K precision

B+K precision CAL73 User manual

B+K precision

B+K precision 2120C User manual

B+K precision

B+K precision BK8510B User manual

B+K precision

B+K precision 4040A User manual

B+K precision

B+K precision 2560B Series User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual