BOWMAN BD106-0012 User manual

Product Videos:

BowmanDispensers.com/Product-Videos

Product Description:

• Kit Includes:

-RS005-0412 Respiratory Hygiene Station - Locking

◦Holds two boxes of face masks, one - two boxes of facial

tissues or one box of gloves, and one hand sanitizer

dispenser

◦Quartz Beige Powder-Coated Steel

-KS010-0412 Floor Stand

◦Quartz Beige Powder-Coated Steel

-MP-075 Sign Holder - Horizontal

◦Holds 11" x 8.5" signage

◦Clear PETG Plastic

• Assembly hardware included

Primary Area for Product Usage:

• All ports of entry

• Anywhere respiratory hygiene products are needed

Dispenses:

• Left: Dispensing unit no larger than 8.40"W x 14.80"H x 5.00"D

(21.2 cm x 37.5 cm x 12.7 cm)

•[Note: Refer to automatic dispensing specications on detection

distance requirements.]

• Middle: Box(es) no larger than 8.00”W x 9.50”H x 4.75”D

(20.3 cm x 24.1 cm x 12.1 cm)

• Right: Box(es) no larger than 5.50”W x 9.50”H x 4.75”D

(13.7 cm x 24.1 cm x 12.1 cm)

Product Specications (overall assembled dimensions):

• 22.31"W x 58.01"H x 17.00"D (56.7 cm x 147.3 cm x 43.2 cm)

• 22.5 lbs (10.2 kg) - approximated

Package Specications:

• Package Quantity: 1 per case

• 36"L x 20"W x 6"H (91.4 cm x 50.8 cm x 15.2 cm)

• 26.0 lbs (12.7 kg) - approximated

Cover Your Cough Compliance Kit

BD106-0012

Sanizer, face

masks, and ssues

not included

BD106-0012 - Assembly

Information subject to change without notice. Dimensions are approximate. (Not to scale)

To secure base to column, turn column

upside down (with top plate down) and

place base inverted, as shown, on column.

Use Phillips screwdriver to secure base to

column with (4x) screws (10-32 x 5/16").

Turn stand right side up, so the base is on

the oor.

1 2 3

Assembly Instructions

Cover Your Cough Compliance Kit

BD106-0012

Column Assembly

with Top Plate

Base

Top of

column

Boom of

column

Base

Mounting holes

for hand sanitizer

Aach the RS005-0412 Respiratory

Hygiene Staon to the column using (4x)

screws included with stand. One pair

of screw holes is located in the hand

sanizer dispener secon; the second pair

is inside the facemask secon and can be

accessed with the lid open. Tighten all

screws.

To mount the MP-070 Sign Holder, align

the mounng holes of the holder with the

holes on the top front of the dispenser.

Aach using (2x) barrel screws included

with sign holder.

Aach hand sanizer dispenser using VHB

tape or mounng holes provided.

Top Plate

of column

Parts included:

•Base

•Column

•Respiratory Hygiene Station

•Sign Holder

•Hardware

◦(8x) 10-32 x 5/16" Phillips head screws

◦(2x) Barrel screws

Tools Required:

•Phillips Screwdriver •Flathead Screwdriver

Assembly

Always mount dispensers securely prior to loading with product.

RS005-0412 & KS010-0412

Characteristics & Care

BD106-0012

Cover Your Cough Compliance Kit

Designed for Long-Term Use Designed for Long-Term, Heavy-Duty Applications

Our steel dispensers and stands are coated with

polyester powders which makes them highly resistant

to corrosion.

Powder-coated steel is ideal for dispensers used in

a healthcare or an industrial setting because it is

impact resistant and is not effected by extremes in

temperature.

Dispensers and stands made of powder-coated steel

are both attractive and functional, providing years of

service.

Copolyester resin is designed for heavy-duty

applications, and is used by BOWMAN® Dispensers.

We never use acrylic in our products.

Copolyester (PETG) is typically 15-20 times tougher

than general purpose acrylic. PETG is made to

withstand handling and reduce losses due to

breakage.

PETG resists a variety of chemicals and commonly

used cleaning agents. It is tough and durable (not

brittle), providing years of trouble-free functionality

and long life.

Clear optical characteristics mean the viewer can see

the content, read text, and see true colors through

the material. It complies with FDA regulations for food

contact.

For best results, clean by washing the surface with a

diluted solution of a mild, non-abrasive detergent in

cold or warm water and a non-abrasive cloth. Standard

hospital cleaning supplies can be used.

Dry with a soft cloth. Do not use any solvent-based

materials, abrasives (e.g. Scotch-brite, steel wool), or

apply excessive force during cleaning.

Most cleaning chemicals do not weaken the surface

or cause damage to the material. Suggested cleaning

method is to use a soft cloth, warm water, and mild

soap.

Powder-Coated Steel PETG Plastic

MP-075

Material Characteristics

Care and Cleaning

BD106-0012 - Characteristics & Care

Information subject to change without notice. Dimensions are approximate. (Not to scale)

BOWMAN Dispensers

800.962.4660 • www.BowmanDispensers.com

BD1060012TDSg

Other BOWMAN Dispenser manuals

Popular Dispenser manuals by other brands

Silver King

Silver King Majestic SK12MAJ Technical manual and replacement parts list

Franke

Franke F3Dn Twin Service manual

STIEBEL ELTRON

STIEBEL ELTRON UltraHot Plus Operation and installation instructions

DAN DRYER

DAN DRYER 282 installation guide

Essity

Essity Tork 473208 manual

CBS

CBS SD300BU-88 COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST

Sealey

Sealey MK77 manual

Fluid Management

Fluid Management Accutinter 1600 End user guide

Franke

Franke DVS SD99-010 Installation and operating instructions

Graco

Graco Dispensit 1053-10C operation & maintenance

ITALTINTO

ITALTINTO i50 user manual

Coca-Cola

Coca-Cola FREESTYLE 9000 user guide

Graco

Graco ProMix 2KE Operation

TECHCON SYSTEMS

TECHCON SYSTEMS TS1251 user manual

Wayne

Wayne GLOBAL VISTA CNG instruction manual

clarsen

clarsen H133 Instructions for use

PicoBrew

PicoBrew Zymatic user manual

HURAKAN

HURAKAN HKN-MT1 manual