Bowflex Xceed Plus User manual

WWWBOWFLEXCOM

The Bowflex Xceed™Plus

Home Gym

Assembly Manual

P/N 001-6907 Rev. D (06/12/2007)

Table of Contents

Specifications / Approvals .....................1

Important Safety Precautions ...................2

Before You Begin ............................ 3

Parts Reference Guide.........................4

Hardware Guide ............................ 6

Assembly Guide ..............................7

Contact Information.......................... 17

Congratulations on your commitment to ﬁtness and your purchase of the Bowﬂex Xceed™Plus

home gym. Before assembling your Bowﬂex Xceed™Plus home gym please read the Assembly Manual and

follow the Important Safety Precautions. For information on how to use your Bowﬂex Xceed™Plus home

gym refer to the Bowﬂex Xceed™Plus Owner’s Manual.

Nautilus, Inc.

16400 S.E. Nautilus Drive

Vancouver, Washington, USA 98683

1-800-NAUTILUS (1-800-628-8458)

Fax (800) 898-9410

Nautilus.com

Bowﬂex.com

Bowﬂex Xceed™Plus Assembly Manual 1

Specifications / Approvals

Regulatory Approvals:

Product Weight 157 lbs. (71 kg)

Product Dimensions 53" (135 cm) long x 49" (124 cm) wide x 82" (208 cm) high

Workout Area 96" (244 cm) long x 78" (198 cm) wide

Number of Exercises Over 60

Power Rod®Resistance 310 lbs. (141 kg)

Power Rod® Upgradability 410 lbs. (186 kg.)

User Weight Limit 300 lbs. (136 kg)

Meets:

EN957-1 Class H

EN957-2 Class H

Meets:

ASTM F2276-05

ASTM F2216-05

!34-&

!34-&

Product Specifications:

2Bowﬂex Xceed™Plus Assembly Manual

Important Safety Precautions

Used to call attention to POTENTIAL hazards that could result

in personal injury or loss of life.

READ ALL INSTRUCTIONS BEFORE

ASSEMBLING THE MACHINE.

IMPORTANT SAFETY INSTRUCTIONS

The following deﬁnition applies to the word “Warning” found throughout this manual:

7!2.).'

!44%.4)/.

$!.'%2

)--%$)!4%!#4)/.2%15)2%$

#!54)/.

For your safety, perform

all assembly steps in the

sequence given. Improper

assembly can lead to injury.

Some components can be

heavy or awkward to handle.

Get help if necessary.

Bowﬂex Xceed™Plus Assembly Manual 3

Before You Begin

Before You Assemble

Please take the time to read all assembly

instructions before attempting to assemble your

Bowflex Xceed™Plus home gym. Select where you

are going to locate your machine carefully. The best

place for your Bowflex Xceed™Plus home gym is on

a hard, level surface.

Select a workout area that provides a minimum

clearance behind the rod box of 0.5 ft (15 cm) and a

total width of 6.5 ft (2.0 m). Allow a minimum of 3.0

ft (0.9 m) free space in front of the machine.

Basic Assembly Principles

Here are a few basic tips that will make your

assembly of the Bowflex Xceed™Plus home gym

quick and easy. By using these principles, you can

simplify each process and save yourself extra time

and effort.

1. To make the assembly process go faster,

gather the pieces you need for each step and

thoroughly read the assembly instructions for

that step prior to starting assembly for the step.

2. When tightening a locknut on a bolt, use a

combination wrench to grip the locknut and

ensure that it is fastened securely.

3. When attaching two pieces, gently lift and look

through the bolt holes to help guide the bolt

through the holes.

4. As a general rule, and for all bolts and nuts on

your Bowflex Xceed™Plus home gym, turn bolts

or nuts toward the right to tighten and left to

loosen. Or you can remember the mnemonic:

“Righty tighty, lefty loosey.”

IMPORTANT: LEAVE ALL CABLES COILED AND WRAPPED UNTIL YOUR

BOWFLEX XCEED™PLUS HOME GYM IS FULLY ASSEMBLED.

4Bowﬂex Xceed™Plus Assembly Manual

,EFT0ULLEY!RM

v"ENT,AT"AR

,AT#ROSS"AR

5PPER,AT

4OWER

2OD"OX

WITH0OWER2OD

2ESISTANCE2ODS

3QUAT"AR

3EAT"ACK0AD

3QUAT3TRAPS

3EAT"ACKBONE

3EAT"OTTOM

2IGHT0ULLEY

!RM

,OWER,AT

4OWER

2EAR#ROSS

-EMBER

,EFT&RAME

2AIL

7RAPPED

3LIDER0ULLEY

WITH#ABLE

2IGHT&RAME2AIL

"ASE&RAME

0LATFORM

3QUAT0ULLEY

&RAME

&OAM

2OLLERS

%ND#APS

,EG%XTENSION

"ACKBONE



,OCK.UT

#HROME

4UBES

3NAP(OOKS

#ABLES

,OCK0IN

Leg Extension Attachment

Parts Reference Guide

Bowﬂex Xceed™Plus Assembly Manual 5

Lock Knob Leg Extension

Backbone

2 Chrome

Tubes (3/4")

4 Foam Rollers 4 End Caps (3/4")2 Snap Hooks

& 2 Cables

50" Bent Lat Bar Squat Bar 2 Squat Straps 8 Snap Hooks Tools Included:

Seat Backbone Seat Back

Seat

Bottom

Upper Lat Tower Lat Cross Bar with

Pulleys

2 Hand Grips

Lower Lat Tower

Frame

Rod Box w/ Rods Seat

Support

Rail

Squat Pulley Frame Left Pulley Arm Right Pulley Arm

Base Frame Left Frame Rail Right Frame Rail Rear Cross

Member

NOTE: Specifications Subject to Change Without Notice

Leg Extension Parts

NOTE: Specifications Subject to Change Without Notice

Cable Pulley Slider and

Cable are included

with pulley.

7/32”

3/16”

Parts Reference Guide

2 Hex Wrenches

6Bowﬂex Xceed™Plus Assembly Manual

Qty:2

(5/16"x 2 1/2")

Qty: 2

(3/8"x 3")

Qty: 2

(3/8" x 1")

Qty: 4

(5/16"x 3/4")

Qty: 20

(3/8"x 3/4")

Qty: 2 Threaded Studs

(1/2" x 9 1/2")

Qty: 1

(3/8"x 5")

Qty: 4

(1/2")

Qty: 3

(3/8")

Qty: 2

Cap Screws (1/4"x 1/2")

Qty: 3

Self Threading Screws (#10 x 1")

Hardware Guide

Button Head Screws:

Flat Washers:

Qty: 28

(3/8")

Qty: 6

(5/16")

Qty: 3

(1/4")

Qty: 4

(1/2")

Nylock Nuts:

Tools you will need:

You will need the tools listed below to complete the assembly of your Bowflex Xceed™Plus

home gym. If you don’t have these tools, you can find them at any hardware or department

store.

(NOTE: Drawings not to scale.)

• Flat Blade Screw Driver

• Rubber Mallet

• Utility Knife

• Scissors

• Allen wrenches (included)

• 7/16" Combination Wrench

• 9/16" Combination Wrench

• Adjustable Wrench

• Socket Wrench Set

• Phillips Screw Driver

Bowﬂex Xceed™Plus Assembly Manual 7

Assembly Guide

Step 1 Base Frame Assembly

Parts:

• Base Frame • Right Frame Rail

• Left Frame Rail • Rear Cross Member

Hardware:

• 6Button Head Screws ( 3/8" X 3/4")

• 6Flat Washers (3/8")

Tool: 7/32" Allen Wrench

(or Hex Wrench)

1-1 Lay all parts on floor as

shown.

1-2 Insert Frame Rail

connectors into the

Base Frame and

Rear Cross Member.

Secure with screws

and washers as shown.

Finger tighten screws

at this time.

Step 2 Lower Lat Tower Assembly

Parts:

• Lower Lat Tower Frame

• Rod Box with Power Rod®Pack

Hardware:

• 3Self Threading Screws (#10 X 1")

• 3Flat Washers (1/4")

Tool: Phillips Screw Driver

2-1 Lay parts on floor as shown.

Firmly slide Rod Box into Lower

Lat Tower Frame.

2-2 Fasten the Rod Box to the

Lower Lat Tower Frame with

screws and washers as shown.

Tighten screws until snug.

Self Threading

Screws

Flat Washers

Rod Box w/ Rods

Lower Lat Tower Frame

Rear Cross

Member

Right Frame Rail

Button Head

Screws

Flat

Washers

Flat Washers

Base Frame

Button Head Screws

Left Frame Rail

Button Head Screws

Flat Washers

8Bowﬂex Xceed™Plus Assembly Manual

Assembly Guide

Step 3 Install Lower Lat Tower Assembly

Parts:

• Lower Lat Tower Assembly

• Base Frame Assembly

Hardware:

• 2 Button Head Screws (3/8" X 3/4")

• 2 Flat Washers (3/8")

Tool: 7/32” Hex Wrench

3-1 Align the Lower Lat Tower Assembly over

the Base Frame. Push the bottom of the Lower

Lat Tower onto the connector of the Rear Cross

Member as shown.

3-2 Secure Lower Lat Tower Assembly

using screws and washers as shown.

Finger tighten screws at this time.

Step 4 Install Seat Support Rail

Parts:

• Seat Support Rail

• Base Frame Assembly

Hardware:

• 2Button Head Screws (3/8" X 3/4")

• 2Flat Washers (3/8")

Tool: 7/32" Hex Wrench

4-1 Slide the bottom of the Seat Support

Rail onto the Base Frame connector

as shown.

4-2 Slide the top of the Seat Support

Rail onto the Lower Lat Tower

Assembly connector as shown.

Secure using screws and washers

as shown.

Finger tighten screws at this time.

Base Frame

Assembly

Button

Head

Screw

Flat

Washer

Button

Head

Screw

Flat

Washer

Base Frame/

Lower Lat Tower

Assembly

Seat Support Rail

Flat

Washer

Button

Head

Screw

Button

Head

Screw

Flat

Washer

Lower Lat Tower

Assembly

Other manuals for Xceed Plus

Table of contents

Other Bowflex Home Gym manuals

Bowflex

Bowflex SelectTech 3.1 User manual

Bowflex

Bowflex SelectTech 2080 User manual

Bowflex

Bowflex Xceed User manual

Bowflex

Bowflex Bowflex Xtreme 2 SE User manual

Bowflex

Bowflex Motivator 2 User manual

Bowflex

Bowflex Bowflex Xtreme 2 SE User manual

Bowflex

Bowflex RevolutionXP 001-7057 User manual

Bowflex

Bowflex Revolution User manual

Bowflex

Bowflex Xceed User manual

Bowflex

Bowflex PR1000 User manual

Bowflex

Bowflex Revolution FT User manual

Bowflex

Bowflex Classic User manual

Bowflex

Bowflex SelectTech 552i User manual

Bowflex

Bowflex Motivator 2 User manual

Bowflex

Bowflex 003-3210-120108A User manual

Bowflex

Bowflex Xxtreme 2 SE User manual

Bowflex

Bowflex Xtreme 2 User manual

Bowflex

Bowflex Conquest User manual

Bowflex

Bowflex The BOWFLEX Xtreme2 User manual

Bowflex

Bowflex SelectTech 5.1 User manual

Bowflex

Bowflex Revolution User manual

Bowflex

Bowflex Bowflex Xtreme 2 SE User manual

Bowflex

Bowflex ULTIMATE 2 User manual

Bowflex

Bowflex SelectTech 5.1 User manual

Popular Home Gym manuals by other brands

Horizon Fitness

Horizon Fitness OXFORD 6 manual

Energetics

Energetics Multi Trainer 5.1 owner's manual

Matrix

Matrix MG-PL Series Service manual

Reebok

Reebok Tbr2i Manuale d'istruzioni

Weider

Weider 8300 Hard Drive manual

Pure Fitness

Pure Fitness 8526HE owner's manual

Weider

Weider 8700 I Bedienungsanleitung

NordicTrack

NordicTrack E8200 Competition Bench Bedienungsanleitung

Weider

Weider WEMC10161 user manual

Body Solid

Body Solid GHYP-345 owner's manual

Evo

Evo TAHOE 5105 user manual

cardiobull

cardiobull RA17 manual

ParaBody

ParaBody 40 Assembly instructions

JLL

JLL Ventus Pro Air Power instruction manual

Trojan

Trojan Colorado 370 user manual

Octane Fitness

Octane Fitness xRide xR650 Operation manual

Precor

Precor Discovery Series owner's manual

Insportline

Insportline RW600 user manual