Botron B1000 Instruction Manual
PROPERTIES SPECIFICATIONS
BotronB1000Technical Data Sheet
Cutting Length:
Tape Width:
Core Size:
Accuracy:
LED Display:
Power Repurement
V:
Hz:
W:
Dimensions:
Weight:
5mm - 999mm
7mm - 50mm
1” - 3”
+/- .04 (1mm)
3 digits
AC 110V, 220V
50/60Hz
18W
5.4” x 8.5” x 6”
5.3lbs
Product Notes and Features
• LED Display
• Steel Blades
• Manual Override
• Photocell Control
PART NUMBERS
B1000 Automatic Tape Dispenser
B1010 Replacement Blades
Features:
The B1000 has three digit LED and soft touch keypad for
easy programming as well as digital auto advance and
an electric eye cut sensor. Program up to three different
tape sizes in manual or auto mode. Available cutting
lengths of .20″ up to 39″. Unit can handle multiple styles
of tape and widths ranging from .28″ to 2″ and 1″ thru 3″
wide cores
1 of 2
Disclaimer. All statements of technical information are believed to be true and are based upon tests we
believe to be reliable. The proper use and application for this product must be the responsibility of the user.
The statements herein shall have no force or effect.
Botron Company Inc. | 325 W. Melinda Ln Phoenix AZ 85027 | Ph# 623-582-6700 | Fax# 623-582-6776
BEFORE YOU START OPERATION
1. Turn power switch to “ON” position.
2. Remove spool.
3.Load preferred tape onto spool and replace.
4. Feed tape carefully into rollers using the FWD button.
5. Close pressure cover.
6. Set desired length on control panel and choose auto
or manual for dispensing tape.
7. Press start.
Disclaimer. All statements of technical information are believed to be true and are based upon tests we
believe to be reliable. The proper use and application for this product must be the responsibility of the user.
The statements herein shall have no force or effect.
Botron Company Inc. | 325 W. Melinda Ln Phoenix AZ 85027 | Ph# 623-582-6700 | Fax# 623-582-6776
2 of 2
1. When loading the tape, make sure the ON/OFF switch is
in the OFF position.
2. While operating the B1000 be careful not to put fingers
inside where blade cuts tape. The blade is very sharp and
will cause injury if fingers are placed inside.
3. When there are finger marks, oils and/or dirt on the
dispenser, the tape will not stick properly. Use a dry cloth
to clean.
Note: For more thorough cleaning, wipe the dispenser with
alcohol. (Never clean with thinner.)
4. To avoid shortening the life of the motor, run the B1000
without tape as little as possible.
5. This is an industrial tape dispenser. It is not for home
use. Do not use around children.
6. The B1000 can be used efficiently by one or two
operators. Allow the motor to rest from time to time.
Other Botron Dispenser manuals
Popular Dispenser manuals by other brands
Silver King
Silver King Majestic SK12MAJ Technical manual and replacement parts list
Franke
Franke F3Dn Twin Service manual
STIEBEL ELTRON
STIEBEL ELTRON UltraHot Plus Operation and installation instructions
DAN DRYER
DAN DRYER 282 installation guide
Essity
Essity Tork 473208 manual
CBS
CBS SD300BU-88 COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST
