Bosma X1 Lite User manual
Doorbell
Quick Install Guide
Introduction
：
The BOSMA doorbell is a accessory sensor to the BOSMA X1 home
security camera. It primarily serves as a simple doorbell at the front
door. When it is pressed, it notifies the camera which plays a doorbell
ringing sound and sends a notification to your phone.
Alternatively, it could also be used as an emergency button for those
that may need immediate attention at any time, e.g. an elderly person at
home.
Button
Fig.1
Installation Guide
1. Pair the doorbell with a BOSMA X1 camera
l Open the BOSMA app, make sure that a BOSMA X1 camera has
been added to your account
l Tap “+” button at the top-right corner, and select “Doorbell”
l If you have more than one BOSMA X1 camera, select the one you
want the doorbell to be paired with
l Long-press the doorbell button to pair with the camera
Fig.2
2. Select installation location
You may install the doorbell on the front door. The sensor uses simple
adhesive to stick to a surface. Please install the sensor on a relatively
flat and smooth surface
Peel off the adhesive backing, then stick the doorbell to the surface. See
figures below.
Fig.3
Specifications
Model：DR0001
Range (open area): 300ft
Radio Frequency: 915MHZ
Voltage: DC 3.0V
Amperage: Idle ≤ 600nA; Working ≤ 25mA
Working Temperature: 14 °F ~ 122 °F
Dimensions: 40 * 80 * 10.5mm
Color: White
Other manuals for X1 Lite
1
Table of contents
Other Bosma Accessories manuals
