Bosch B443 User manual

Conettix Cellular Communicators

B44x

en Installation Manual

Conettix Cellular Communicators Table of contents | en 3

Bosch Security Systems, Inc. Installation Manual 2018.04 | 02 | F.01U.345.070

Table of contents

1Cellular module introduction 4

1.1 About documentation 4

1.2 Bosch Security Systems, Inc. product manufacturing dates 4

2Component overview 5

3Installation 7

3.1 Insert the SIM card 7

3.2 Install the antenna 7

3.3 Install the communicator 8

3.4 Remove the communicator 10

4Diagnostic LED descriptions 11

5Configuration 12

5.1 Activating the B440-C/B441-C 12

6Specifications 13

4en | Cellular module introduction Conettix Cellular Communicators

2018.04 | 02 | F.01U.345.070 Installation Manual Bosch Security Systems, Inc.

1 Cellular module introduction

This document contains supplemental information needed to install the Conettix Plug-in

Cellular communication modules.

This reference guide contains:

– Component location overview.

– Installation workflows.

– Diagnostic LED descriptions.

– Configuration.

– Specifications.

1.1 About documentation

This document is the intellectual property of Bosch Security Systems, Inc. and is protected by

Trademarks

All hardware and software product names used in this document are likely to be registered

trademarks and must be treated accordingly.

1.2 Bosch Security Systems, Inc. product manufacturing dates

Use the serial number located on the product label and refer to the Bosch Security Systems,

Inc. website at http://www.boschsecurity.com/datecodes/.

Conettix Cellular Communicators Component overview | en 5

Bosch Security Systems, Inc. Installation Manual 2018.04 | 02 | F.01U.345.070

2 Component overview

Cellular plug-in communicators provide IP communications over supported cellular networks

by directly connecting the communicator into a control panel or into an additional module

such as the Conettix Plug-in Communicator Interface or the Conettix Universal Dual Path

Communicator modules. Some communicators come with a SIM card holder.

Communicators without SIM cards

Callout - Description

1 - Module handle and support leg

2 - LEDs

3 - Threaded female SMA antenna connector

4 - Plug-in module retention clip opening

5 - PCB metal contacts

Notice!

The B440-C/B441-C communicators must be activated and have a valid cellular plan for

proper usage. Refer to Activating the B440-C/B441-C, page 12 for details.

6en | Component overview Conettix Cellular Communicators

2018.04 | 02 | F.01U.345.070 Installation Manual Bosch Security Systems, Inc.

Communicators with SIM cards

Callout - Description

1 - Module handle and support leg

2 - SIM card holder

3 - LEDs

4 - Threaded female SMA antenna connector

5 - Plug-in module retention clip opening

6 - PCM metal contacts

Conettix Cellular Communicators Installation | en 7

Bosch Security Systems, Inc. Installation Manual 2018.04 | 02 | F.01U.345.070

3 Installation

When installing the communicator into a supporting module or control panel, refer to the

compatible documentation for more information.

Caution!

Remove all power (AC and battery) before making any connections. Failure to do so might

result in personal injury and/or equipment damage.

3.1 Insert the SIM card

Follow these instructions for SIM card installation.

1. Break away the SIM card from the die-cut.

2. Insert the SIM card into the SIM card holder by sliding it into the card holder.

3. Make sure the gold contact side of the SIM card is against the module.

Figure3.1: Inserting the SIM card

3.2 Install the antenna

1. Put the magnetic antenna on top of the enclosure, or vertically on another metal surface.

2. Put the antenna cable through a knockout.

3. Connect the antenna cable to the module.

4. Make sure the antenna cable is inside the enclosure.

8en | Installation Conettix Cellular Communicators

2018.04 | 02 | F.01U.345.070 Installation Manual Bosch Security Systems, Inc.

Figure3.2: Installing the antenna

Callout - Description

1 - Antenna routed through any knockout

2 - Antenna cable connected to the module

3.3 Install the communicator

Control panel/universal dual path communicator installation

1. Put the support leg into the support hole labeled X. Refer to Figure 3.3.

2. Align the PCB metal contacts with the on-board connector.

3. Push the module into place. The retention clip snaps closed and secures the module in

place.

Conettix Cellular Communicators Installation | en 9

Bosch Security Systems, Inc. Installation Manual 2018.04 | 02 | F.01U.345.070

Figure3.3: Communicator installation (B6512 control panel shown)

Callout - Description

1 - Support leg inserted into the compatible device support holes

2 - PCB metal contacts resting on the on-board connector

3 - Plug-in communicator retention clip

Plug-in communicator interface installation

1. Insert the communicator into the slot of the plug-in communicator interface.

2. Push in until you feel it "click" into place.

Figure3.4: Communicator installation (B450 shown)

10 en | Installation Conettix Cellular Communicators

2018.04 | 02 | F.01U.345.070 Installation Manual Bosch Security Systems, Inc.

Callout - Description

1 - SIM card insertion (if applicable)

2 - Communicator

3 - Plug-in communicator interface

3.4 Remove the communicator

1. Hold the plug-in module retention clip open.

2. Hold the top corners of the module support handle with your other hand.

3. Pull the module out.

Other manuals for B443

This manual suits for next models

Table of contents

Other Bosch Control Unit manuals

Bosch

Bosch rexroth DBD 1X/ E Series User manual

Bosch

Bosch Rexroth NYM04.1-5PW-NNNN-NY4125 User manual

Bosch

Bosch Rexroth IndraControl XM21 User manual

Bosch

Bosch B426 Operating instructions

Bosch

Bosch PAVIRO PVA-1WEOL User manual

Bosch

Bosch FLM-420-RLV1-D Troubleshooting guide

Bosch

Bosch DDC KIT User manual

Bosch

Bosch Rexroth ctrlX I/O XI332204 User manual

Bosch

Bosch B901 User manual

Bosch

Bosch Conettix DX4020 User manual

Bosch

Bosch FLM-420-01 User manual

Bosch

Bosch AEC-AMC2-UL1 User manual

Bosch

Bosch Rexroth NYS04.1-ST-01-LMS-SERCOS-NY4078 User manual

Bosch

Bosch Rexroth VKK Series User manual

Bosch

Bosch MAP Control Center IUI-MAP0001-2 User manual

Bosch

Bosch Rexroth VT-MRMA1-1 User manual

Bosch

Bosch D8125 Quick start guide

Bosch

Bosch OMNEO OM-1 User manual

Bosch

Bosch rexroth IH04E User manual

Bosch

Bosch B520 Operating and maintenance instructions

Bosch

Bosch AMC2 4W-EXT User manual

Bosch

Bosch ConnectModule BCM3100 User manual

Bosch

Bosch FLM-420-I2-E User manual

Bosch

Bosch AMC2 4W-EXT User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual