Bosch FPA-5000 User manual

FPA‑5000 | FPA‑1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000

FPE‑8000‑SPC | FPE‑8000‑PPC | FPE‑2000‑SPC | FPE‑2000‑PPC |

FPE‑8000‑FMR

en User Guide

FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000 Table of contents | en 3

Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877

Table of contents

1For your safety 7

1.1 Operating the touch screen 7

1.2 Maintenance 7

1.3 Usage in accordance with regulations 8

1.4 Skills required by personnel 8

2For your information 9

2.1 What is new 9

2.2 Open Source license agreement 10

2.3 Calling up the start menu 10

2.4 Changing language display 10

2.5 Warranty and liability 10

2.6 Copyright 10

3All functions at a glance 11

4In overview 13

4.1 Operating elements 13

4.2 Status LEDs 14

4.3 Touch screen 16

4.4 Standby screen 18

4.5 Display support information 19

5Operating principle 20

5.1 Switch on and switch off 20

5.2 Initial setup 21

5.3 Logging on and off 22

5.3.1 Logging on 22

5.3.2 Logging off 22

5.4 Access authorization 22

5.5 Calling up the start menu 23

5.6 Personalized menu 23

5.7 Selecting the menu 23

5.8 Returning to the previous selection 23

5.9 Working with lists 24

5.9.1 Scrolling through lists 25

5.9.2 Various states of list fields 25

5.9.3 Assigning mode 26

5.10 Search Function/Element 26

5.10.1 Search by name 26

5.10.2 Searching by number 27

5.11 Entering numbers and text 27

5.11.1 Changing an entry 28

5.11.2 Deleting all numbers 28

5.12 Changing language display 28

5.12.1 Entering by shortcut 28

5.12.2 Change language by menu 28

5.13 Switching between status bars 29

5.14 Standby 29

5.15 Logical and physical addressing 29

6Networking via Ethernet 30

6.1 IP settings 30

4en | Table of contents FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000

2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH

6.2 Diagnostics 30

7Remote keypad 32

7.1 Operation and display 32

7.2 Connecting to remote panel 32

8Alarm 34

8.1 Types of alarm 34

8.2 Entry delays 34

8.3 Day and night mode 35

8.4 Alarm message to the panel 36

8.4.1 Optical and acoustic signals 36

8.4.2 Displaying the detector zones in alarm state 36

8.4.3 Sequence of the alarm messages 37

8.4.4 Information about logical zones in the alarm state 37

8.4.5 The newest message 38

8.4.6 Displaying the individual detectors in a logical zone 38

8.4.7 Information about individual detectors 38

8.4.8 Displaying additional information 39

9Fire alarm 40

9.1 Evacuation 40

9.2 Optical and acoustic signals 41

9.3 Acknowledging a message 41

9.4 Silence internal buzzer 41

9.5 Activate and silence signaling devices 41

9.6 Resetting signaling devices and transmission devices 41

9.7 Triggering fire verification 42

9.7.1 Alarm verification 42

9.7.2 Starting time to investigate 42

9.7.3 Triggering alarm manually 43

9.8 Resetting alarm message 43

9.9 Bypassing detectors 44

10 Fault message 45

10.1 Calling up fault indication 45

10.2 Fault message on the panel 45

10.2.1 Acknowledging a message 45

10.2.2 Sequence of the fault messages 46

10.2.3 Information about malfunctioning element groups 46

10.2.4 The newest message 46

10.2.5 Displaying individual elements of an element group 47

10.2.6 Information about individual elements 47

10.2.7 Displaying additional information 47

10.2.8 Signals 48

10.3 Resetting fault message 48

10.4 Blocking an element 49

11 Bypass 50

11.1 Menu overview 50

11.2 Bypassing and un-bypassing elements 50

11.3 Displaying and un-bypassing bypassed element groups 50

11.4 Displaying list of all bypassed elements 51

11.4.1 Using the menu 51

FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000 Table of contents | en 5

Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877

11.4.2 Via the status bar 51

11.5 Bypassing/Un-bypassing buzzer 51

11.6 Bypassing/Un-bypassing the output to fault warning routing equipment 52

11.6.1 Bypassing the output to fault warning routing equipment 52

11.6.2 Un-bypassing the output to fault warning routing equipment 52

12 Block 54

12.1 Menu overview 54

12.2 Blocking and unblocking elements 54

12.3 Displaying list of all blocked elements 54

12.3.1 Using the menu 54

12.3.2 Via the status bar 55

13 Diagnostics 56

13.1 Menu overview 56

13.2 Element details 56

13.3 Modules 57

13.4 Hardware 57

13.4.1 Display 57

13.4.2 CAN-Bus 58

13.5 Panel Passport 58

13.6 LED Test on modules 58

13.7 Network services 58

13.7.1 Routing table 58

13.7.2 Consistency check 59

13.7.3 Ethernet ports 59

13.7.4 Send ping command 60

13.7.5 Remote services 60

13.8 Voice alarm systems 61

14 Maintenance 63

14.1 Menu overview 63

14.2 Change language 63

14.3 Activate Outputs 63

14.4 Activate Transmission Device 64

14.5 Bypassing/Un-bypassing buzzer 64

15 Maintenance – walktest 65

15.1 Walktest groups 65

15.1.1 Adding or deleting elements 65

15.2 Starting and ending walktest 67

15.2.1 Starting the walktest 67

15.2.2 Ending the walktest 68

15.3 Ending walktest for all elements 68

15.4 Displaying tested or untested elements 68

15.5 Assigning tested elements to a walktest group 68

16 Maintenance – history log 69

16.1 Selecting filters 69

16.2 Setting filters 69

16.3 Change Filter 70

16.4 Combining several filters 70

16.5 Status bar functions 70

16.6 Printing out data 70

6en | Table of contents FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000

2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH

17 Day and night mode 72

17.1 Switching between day and night mode 72

17.2 Showing details 73

17.3 Changing the time for resetting to night mode 73

18 Configuration 75

18.1 Menu overview 75

18.2 Physical node address (PNA/RSN) 75

18.3 Group setting 75

18.3.1 Adding or deleting 75

18.3.2 Change name 77

18.4 Detector sensitivity 77

18.5 Operator 77

18.5.1 Change password 78

18.5.2 Change universal password 78

18.5.3 Set Default Password 78

18.6 Rename elements 78

18.7 Network services 79

18.7.1 Ethernet 79

18.7.2 Change date/time 79

18.7.3 Remote Services 79

18.8 Overview 79

19 Further functions 81

19.1 Menu overview 81

19.2 Change Date / Time 81

19.3 Master password 81

19.3.1 Enter the master password that is valid indefinitely 81

19.3.2 Enter the 24-hour master password 81

19.4 Remote Services 82

19.5 Change password 83

19.6 Performing a fire drill 83

19.7 Alarm Counters 84

20 Reset 85

20.1 Menu overview 85

20.2 Resetting elements 85

21 Control / Monitor 86

21.1 Menu overview 86

21.2 Activate doorholder, control element or HVAC 86

21.3 Go to element 86

21.4 Search for function 86

22 Boot menu 88

Index 89

FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000 For your safety | en 7

Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877

1 For your safety

Before using the device, familiarize yourself with these instructions. If you do not read and

understand these explanations, you will not be able to operate the device faultlessly.

The operating instructions do not do away with the need for training by authorized personnel.

Notice!

The device may only be operated by trained personnel. See

Skills required by personnel, page

This user guide does not contain any general or special knowledge about safety issues.

Information on such issues is only given to the extent that it is needed for operation of the

device.

Ensure that you are familiar with all safety-related processes and regulations in your area. This

also includes how to behave in the event of an alarm and the initial steps to take if a fire

breaks out.

The user guide is a statutory part of the system and must be made known to the new owner if

the system is ever sold.

Notice!

The personal access code (consisting of user ID and password) must not be made known to

third parties.

Warning!

The device must be shut down by power button. Don’t unplug the device from power supply

while the system is in operation. This could result in the damage of the device. After shutting

down the device correctly restart it via the power button.

1.1 Operating the touch screen

Caution!

Do not use any pointed or sharp objects (e.g. screw drivers, pens, etc.) when operating the

touch-sensitive display. The touchscreen may not be exposed to direct sunlight. Both can

seriously damage the touchscreen.

Caution!

The recalibration of the panel touchscreen must be performed at least once a year. Otherwise

the operation of the panel may be limited or become even impossible without prior

recalibration.

1.2 Maintenance

Clean the touch screen and surfaces with a slightly damp soft cloth only. Do not use any

cleaning agents and make sure that no liquid enters the inside of the device.

8en | For your safety FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000

2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH

1.3 Usage in accordance with regulations

Notice!

Terminology

The term Walktest, which is used in the fire panel and in the documentation, corresponds to

the EN54‑2 standard term Test condition.

The panel controller is designed for operating the AVENAR panel 8000/2000 fire panel. It can

perform the following tasks:

– Displaying and processing various message types such as alarm and trouble messages

– Bypassing, blocking and resetting elements

– Monitoring and controlling of sounders and outputs

– Performing a walktest

– Display diagnostic information about every LSN element

– Configuration of detectors (short texts and detector sensitivity)

– Performing a drill

– Saving, displaying and printing out events

– Switching the system to day or night mode.

Notice!

The manual control of evacuation zones and the outputs connected to fire protection

equipment (e-Matrix) are user features without regulatory requirements, as these features are

not within the scope of EN54-2.

1.4 Skills required by personnel

Display of event messages on the panel controller must only be processed by trained

personnel.

The system walk test and detector configuration must only be performed by trained,

authorized personnel.

FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000 For your information | en 9

Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877

2 For your information

This operation guide contains important information and notes on operating the AVENAR panel

8000/2000.

Using the step-by-step directions, you can familiarize yourself with the individual functions:

–

In overview, page 13

provides an overview of the operating and display elements and the

touch screen.

– In

Operating principle, page 20

, you will learn how to navigate through the individual

menus and which selection possibilities are available to you.

Each function is described in detail in an individual chapter.

You will find specific topics in the table of contents. If you are already practiced in the

handling of menus, you can use the overview of all menus in

All functions at a glance, page

2.1 What is new

The AVENAR panel 8000/2000 is the successor panel of the FPA-5000/FPA-1200 modular fire

panel. AVENAR panel 8000/2000 combines a new and powerful panel controller platform with

all the well-known stable safety features.

When operating the AVENAR panel 8000/2000 please note the following important

innovations:

Physical node address (PNA/RSN)

The physical node address of the panel is set in the panel firmware when switching on the

panel for the first time. The physical node address dialog replaces the mechanical rotary

switches.

For details see

Initial setup, page 21

Power button

The panel must be switched on and off with a power button which is located at the right side

of the panel. Also a reboot of the panel is done via the power button.

For details see

Switch on and switch off, page 20

Calibration of the touchscreen

The calibration of the touchscreen is started via the boot menu, which can be called up during

the boot process of the panel, for details see

Boot menu, page 88

Refer to

– Boot menu, page 88

10 en | For your information FPA-5000 | FPA-1200 | AVENAR panel 8000 |

AVENAR panel 2000 | AVENAR keypad 8000

2020-07 | 3.0 | F.01U.378.877 User Guide Bosch Sicherheitssysteme GmbH

2.2 Open Source license agreement

Notice!

Bosch Sicherheitssysteme GmbH uses open source software within this product. The

declaration of the components and their respective licenses can be found on http://

www.boschsecurity.com/oss/.

2.3 Calling up the start menu

4Press .

You can use this key to return from any submenu back to the start menu.

2.4 Changing language display

The panel language can be changed quickly with a shortcut:

1. Press to open the start menu.

2. Press 1 on the alphanumeric keypad.

3. Select OK to confirm the entry or Cancel to cancel the operation.

A list of the existing languages is displayed.

4. Select the language you require.

All display elements are now shown in the selected language.

Notice!

After a system reboot following a power cut or battery failure, the default language set in the

FSP‑5000‑RPS is displayed again.

2.5 Warranty and liability

Warranty and liability claims for personal and property damage are excluded if these were

caused by one or several of the following causes:

– Use of the fire panel contrary to the regulations

– Improper set-up, installation, start-up, operation or maintenance

– Disregarding of the user manual

– Subsequent constructional changes

– Faulty repairs

– Catastrophes, influence of foreign bodies, and force majeure.

Without the permission of Bosch, no changes or additions to or rebuilding of the panel

including the panel controller may be undertaken.

Rebuilding requires written permission. In case of non-approved constructional changes, any

warranty claims against Bosch are voided.

2.6 Copyright

Bosch Sicherheitssysteme GmbH, Robert-Bosch-Ring 5, 85630 Grasbrunn, Germany retains

the complete copyright to the whole documentation. Without the express written permission

of Bosch, no part of these documents may be duplicated or transmitted in any form.

Bosch reserves the right to make changes to this manual without prior notice.

Other manuals for FPA-5000

This manual suits for next models

Table of contents

Other Bosch Control Panel manuals

Bosch

Bosch B6512 User manual

Bosch

Bosch D9412GV4 Operating instructions

Bosch

Bosch ICP-CC404 User manual

Bosch

Bosch ICP-CC404 User manual

Bosch

Bosch Radionics D8024 Quick start guide

Bosch

Bosch D7212 User manual

Bosch

Bosch B9512G-E User manual

Bosch

Bosch AddressiFire DS9400M Mounting instructions

Bosch

Bosch Rexroth VAM 10.1 Technical manual

Bosch

Bosch CPS21T User manual

Bosch

Bosch D7212GV2 Quick start guide

Bosch

Bosch BE 300 LSN User manual

Bosch

Bosch ICP-EZM2 User manual

Bosch

Bosch ICP-CC408 User manual

Bosch

Bosch Rexroth IndraControl VDP 80.1 Series User manual

Bosch

Bosch B8512G User manual

Bosch

Bosch B9512G User manual

Bosch

Bosch Solution-16 safecom User manual

Bosch

Bosch DS7400Xi User manual

Bosch

Bosch DS6R2 Operating instructions

Bosch

Bosch AVENAR Series User manual

Bosch

Bosch ICP-CC488 User manual

Bosch

Bosch DS3MX-E-U User manual

Bosch

Bosch B6512 Instruction manual

Popular Control Panel manuals by other brands

RDZ

RDZ PC-HRX user manual

STG-BEIKIRCH

STG-BEIKIRCH MZ3 operation instruction

Efka

Efka Variocontrol V810 instruction manual

Cebora

Cebora 208-10 instruction manual

AMX

AMX AutoPatch CP-15 instruction manual

Satel

Satel CA-6 KLED-S user manual

Evolution

Evolution IQ plus 800 installation manual

Fagor

Fagor 8040 TCO CNC operating manual

Trane

Trane ComfortLink II XL950 Control user guide

AKO

AKO PROCool AKO-17635-2 quick guide

ABB

ABB 6136/30M-101 operating instructions

Telikou

Telikou BK-603 Belt Pack instruction manual

Mapei

Mapei Mapeheat Thermo Touch user guide

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 user manual

Sminn

Sminn BOX L VF1L EI instruction manual

Balboa

Balboa TP600 user manual

Nice

Nice HSCU1 Instructions and warnings for installation and use

Truma

Truma CP plus installation instructions