Bosch FPA-5000 User guide

Modular Fire Panel

FPA-5000

en System Information

Modular Fire Panel Table of contents | en 3

Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089

Table of contents

1System Information 6

2Product Description 6

2.1 FPA-5000 with Functional Modules 6

2.2 MPC Panel Controller 11

2.3 Remote Keypad 12

2.4 Housings for Frame Installation 13

2.5 Housings for Wall Mounting 16

2.6 System Overview of FPA-5000 with Peripherals 18

2.7 Networking 23

2.8 Connection to BIS 23

2.9 Connecting a Voice Alarm System 24

3Planning 24

3.1 General Information 24

3.2 Structures in Local Security Network 25

3.3 Detection Points 27

3.4 Addressing 27

3.5 Achievable Cable Length with LSN 0300 A 28

3.6 Achievable Cable Length with LSN 1500 A 31

3.7 Examples of Housing Equipment 35

3.8 Configuration of BCM Battery Controller Module 36

3.9 Redundancy 40

4Installation 42

4.1 General Information 42

4.2 Quick Installation Guide 43

4.3 Installation of Housing Components 44

4.3.1 Installation Instructions for Housing 45

4.3.2 Installation Dimensions for Wall Mounting Housing 47

4.3.3 Installation Dimensions for Frame Installation Housing 53

4.3.4 Installation Dimensions for Mounting Frames 56

4.3.5 Installation Kits for 48 cm (19”) Racks 59

4.4 Accessories for Housing 61

4.4.1 RLE 0000 A Junction Board 61

4.4.2 HMP 0003 A Mounting Plate for Mounting Frame 63

4.4.3 FPO-5000-EB Earth Bar 65

4.5 Power Supply Brackets 65

4.5.1 FPO‑5000‑PSB‑CH Power Supply Bracket 67

4.5.2 FPO-5000-PSB1 Power Supply Bracket 71

4.6 UPS 2416 A Universal Power Supply 24 V/6 A 72

4.7 Panel Rails 78

4.7.1 PRS-0002-C Panel Rail Short for 2 Modules 78

4.7.2 PRD 0004 A Panel Rail Long for 4 Modules 80

4.7.3 Panel Rail Installation 81

4.8 MPC Panel Controller 84

4.9 Functional Modules 99

4.9.1 Installation and Removal 100

4.9.2 ANI 0016 A Annunciator Module 101

4.9.3 BCM‑0000‑B Battery Controller Module 101

4.9.4 CZM 0004 A 4 Zone Conventional Module 107

4en | Table of contents Modular Fire Panel

09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH

4.9.5 ENO 0000 B Fire Service Interface Module 107

4.9.6 FPE‑5000‑UGM Interface Module 109

4.9.7 IOP 0008 A Input/Output Module 110

4.9.8 IOS 0020 A 20 mA Communication Module 111

4.9.9 IOS 0232 A RS232 Communication Module 112

4.9.10 LSN 0300 A LSN improved Module 300 mA 113

4.9.11 LSN 1500 A LSN improved Module 1500 mA 114

4.9.12 NZM 0002 A Notification Appliance Zone Module 116

4.9.13 RMH 0002 A Relay Module for Mains Voltage 117

4.9.14 RML 0008 A Relay Module for Low Voltage 118

4.9.15 Accessories for Functional Modules 119

4.10 Cable Sets 120

4.11 Monitoring auxiliary power according to EN 54-13 121

4.12 FPP‑5000 External Power Supply Unit Kit 24 V/6 A 121

4.13 THP 2020 A Thermal Printer 123

4.14 Remote Keypad 127

5Commissioning 141

5.1 Notes 141

5.2 Documentation 141

5.3 Quick Guide for Commissioning 141

5.4 Functional Test 141

5.4.1 Preparation 141

5.4.2 Testing the Power Supply 142

5.4.3 Testing the Conventional and LSN Functions 142

5.4.4 Testing the Addressing/Activation 142

6Maintenance and Service 143

6.1 Warranty 143

6.2 Repair 143

6.3 Disposal 143

6.4 Additional Documentation 143

7Technical Data 143

7.1 System Limits 143

7.2 Power loss of FPA-5000 Components 145

7.3 Housing and Accessories 146

7.3.1 Housings for Frame Installation 146

7.3.2 Housings for Wall Mounting 146

7.3.3 PRS-0002-C Panel Rail Short for 2 Modules 146

7.3.4 PRS 0002 A Panel Rail Short for 2 Modules (no longer available) 147

7.3.5 PRD 0004 A Panel Rail Long for 4 Modules 147

7.3.6 FPO‑5000‑PSB1/FPO‑5000‑PSB‑CH Power Supply Brackets 148

7.3.7 UPS 2416 A Universal Power Supply 24 V/6 A 148

7.4 Panel Controller and Remote Keypad 148

7.4.1 MPC 148

7.4.2 Remote Keypad 149

7.4.3 FSP-5000-RPS Programming Software 150

7.5 Functional Modules 150

7.5.1 ANI 0016 A Annunciator Module 150

7.5.2 BCM‑0000‑B Battery Controller Module 150

7.5.3 CZM 0004 A 4 Zone Conventional Module 151

Modular Fire Panel Table of contents | en 5

Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089

7.5.4 ENO 0000 B Fire Service Interface Module 152

7.5.5 FPE‑5000‑UGM Interface Module 152

7.5.6 IOP 0008 A Input/Output Module 152

7.5.7 IOS 0020 A 20 mA Communication Module 153

7.5.8 IOS 0232 A RS232 Communication Module 153

7.5.9 LSN 0300 A LSN improved Module 300 mA 153

7.5.10 LSN 1500 A LSN improved Module 1500 mA 154

7.5.11 NZM 0002 A Notification Appliance Zone Module 155

7.5.12 RMH 0002 A Relay Module for mains voltage 155

7.5.13 RML 0008 A Relay Module for Low Voltage 156

7.6 FPP‑5000 External Power Supply Unit Kit 24 V/6 A 156

7.6.1 FPP‑5000 Kit 156

7.6.2 FPP‑5000‑TI Trouble Interface 157

7.6.3 FPP‑5000‑TI13 Communication Interface 157

8Appendix 157

8.1 Options with requirements under EN 54‑2:1997/A1:2006 157

8.2 Component Overview 158

8.2.1 Frame Installation Housings, Mounting Frames and Installation Kits 158

8.2.2 Wall Mounting Housings and Installation Kits 158

8.2.3 Accessories for Housing 159

8.2.4 Panel Rails 159

8.2.5 Power Supply Units, Power Supply Brackets, Batteries 159

8.2.6 Panel Controller/Remote Keypad 160

8.2.7 Functional Modules 162

8.2.8 Cable Sets 162

8.2.9 Thermal Printer 162

8.2.10 CAN/FOC Adapters 163

8.3 Special Applications 164

8.3.1 Controlling Extinguishing Systems 164

Index 165

6en | System Information Modular Fire Panel

09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH

1 System Information

Safety Instructions

Danger!

The fire panel contains live components.

Touching live components can result in electric shock.

Disconnect the power supply to the fire panel before all maintenance or installation work.

Notice!

The fire panel may only be installed and commissioned by trained specialist personnel.

Notice!

Have maintenance and inspection work carried out regularly by trained, qualified personnel.

Bosch Sicherheitssysteme GmbH recommends a functional and visual inspection at least once

a year.

Notice!

The fire panel is designed for indoor installation.

After installing batteries, the poles must be masked. Appropriate masking strips are included

with the housing in which the batteries are installed.

Use fuses complying with national regulations to protect the power lines.

Notice!

Do not dispose of batteries with domestic waste. Use the collection points provided locally.

See http://www.boschsecurity.com/standards for further information.

Notice!

Consider national and local regulations when installling and operating the fire system.

2 Product Description

With its modular design, the FPA-5000 Fire Panel is easily adapted to local circumstances and

regulations. Due to the different functional modules, country-specific characteristics are

accommodated in the connection just as quickly as the respective alarm protocol.

2.1 FPA-5000 with Functional Modules

The fire panel is available with two different housings:

– Housing for mounting directly on the wall

– Frame installation housings, which are fitted to the mounting frame and can be swiveled.

Special installation kits also allow installation in 482.6mm (19") racks. All housings can be

extended with various additional housings.

The fire panel is configured on a laptop using the FSP-5000-RPS programming software.

Modular Fire Panel Product Description | en 7

Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089

The MPC Panel Controller is the central component of the system. All messages are shown on

the display. The complete system is operated via a touch screen. The user-friendly interface

adapts to the relevant situation. This allows correct operation that is both simple and clear

and targeted and intuitive. The FSP-5000-RPS programming software enables adaptation to

country-specific circumstances.

The panels can be networked with one another and with the remote keypad using the external

CAN bus interface. With a loop or bus structure, this networking is adapted to the conditions

of use (see Networking, page 23).

The FPA-5000 can be connected to the Bosch UGM Universal Security System and thus

integrated into large-scale systems.

Connection to a building management system (Bosch Building Integration System BIS) is

possible via an Ethernet interface using an OPC server (see Connection to BIS, page 23). The

FSM-5000-FSI Software Interface Package allows custom connections to other management

systems.

The FPA-5000 can be connected to a Plena Voice Alarm System. The Praesideo/PAVIRO

systems can be connected using an IP based interface module. See Connecting a Voice Alarm

System, page 24.

The FMR-5000-C Remote Keypad allows decentralized operation of the panel or the panel

network.

Ethernet

BIS

OPC

FPA-5000

FMR-5000

Figure2.1: FPA-5000 Fire Panel (with FMR-5000-C Remote Keypad) in a network

System Overview

The figure below shows an example configuration:

8en | Product Description Modular Fire Panel

09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH

TUO

8 9

5 6

2 3

PQRS TUV WXYZ

GHI JKI MNO

ABC DEF

F i r e

Test

City Tie

City Tie Fa ult

Ground F ault

Battery F ault

Power

Trouble

Signal S ilence

Bypass ed

Superv isory

N A C 1 N A C 3N A C 7N A C

N A C 5

N A C 2N A C 4N A C 8N A C

N A C 6

PS 2PS 3 PS 5P S

PS 4

BC B A T

BA T 2

10 A

25 A

Bridge 2-3 Bridge 3-4 Bri dge 4- 5 Bridge 5- 6

- - - --+ + + ++

- + - +

BA T 1 AB AT 1 B

NETZEIN

NETZSTROM

Störung

BATTERIE1

Störung

BATTERIE2

Störung

FAULT

MAIN

+ - BAT1

+ - BAT2

+ - BAT1

+ - +-

FAULT AC

FAULT

AUX3

+ - AUX4

+ -

AUX2

+ -

AUX1

+ - AUX5

+ - AUX6

+ -

BCM0000A

L S N 0 3 0 0 A

AU X 1

+ - L S N 1

a -b +AU X 2

+ - L S N 2

a -b +

ZONE4

Störung

ZONE3

Störung

ZONE2

Störung

ZONE1

Störung

CZM0004A

AUX1

+ - OUT1

+- IN1

+- AUX2

+ - OUT2

+- IN2

AUX3

+ - OUT3

+- IN3

+- AUX4

+ - OUT4

+- IN4

ANI0016A

F2F1

NC1

NO1

NC2

NO2

FB1

+-FB2

+ -

RELAIS2

Störung

RELAIS1

Störung

RMH0002A

OUT3

OUT2

OUT4

OUT6

OUT5

OUT7

GND

OUT8

GND

IN1

IN3

IN2

IN4

IN6

IN5

IN7

GND

IN8

GND

OUT1

IOP0008A

110

Figure2.2: Example configuration

Position Description Position Description

1 Functional modules 7 Power supply unit

Modular Fire Panel Product Description | en 9

Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089

Position Description Position Description

2 Address cards 8 Housing (in this case: HCP0006A)

3 Panel controller 9 Panel rail, long

4 Distributor, optional (RLE) 10 Batteries

5 Panel rail, short 11 Remote keypad

6 Power supply bracket

Functions

Due to its modular structure, the FPA‑5000 Modular Fire Panel provides complete flexibility

and thus customized solutions for any application.

The configuration of the components is supported by Planning Software by Bosch for fire

alarm systems. The software provides information about the size and number of housings, the

modules and the energy balance calculation.

Depending on specific requirements, the planning involves choosing from the following

options:

–Housing type (frame and wall mounting)

– Selection of a basic housing

– Extension housing, optional

– Power supply housing, optional

– Installation kits (optional) for installation in 482.6mm (19") racks

–Panel controller

– Selection from a range of language versions

–Panel rail

– Selection according to housing type and/or number of functional modules required

–Power supply

– Batteries

– Power supply units for additional power supply

– Power supply brackets

The power supply brackets on frame installation housings are preinstalled ex works;

for wall-mounted housings, power supply brackets can be selected as required.

–Thermal printer

– THP2020A Thermal Printer

The thermal printer is used to document operating procedures on the panel, as well

as alarm and fault messages (see THP2020A Thermal Printer, page 123). Plain text

can also be printed. Programming is carried out via the programming software

FSP-5000-RPS.

–Additional accessories

– Front doors

– Cable sets for special applications (see Cable Sets, page 120)

–Functional modules

Functional modules are independent, encapsulated units that can be inserted into any

slot on the panel. The power supply and the data traffic with the panel are therefore

provided automatically. The module is identified by the panel with no further settings and

operates in the default operating mode (plug and play).

Wiring to external components is performed using compact connector/screw terminals.

After a replacement, only the connectors need to be reinserted; there is no need for

extensive rewiring.

10 en | Product Description Modular Fire Panel

09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH

Module Description Function

ANI 0016 A Annunciator Module Indicating system statuses; with 16 red and 16

yellow freely programmable LEDs

BCM-0000-B Battery Controller

Module

Monitoring the power supply to the panel and the

battery charge level

CZM 0004 A 4 Zone Conventional

Module

Connecting existing conventional peripherals using

four monitored conventional lines

ENO 0000 B Fire Service

Interface Module

Connecting fire service equipment complying with

DIN 14675

FPE-5000-UGM Interface Module Connection to UGM systems

IOP 0008 A Input/Output OC

Module

Individual displays or flexible connection of various

electrical devices, with 8 independent digital inputs

and 8 open collector outputs

IOS 0020 A 20mA

Communication

Module

With S20, RS232 and S1 interfaces

IOS 0232 A RS232

Communication

Module

Connection of two devices using two independent

serial interfaces, e.g. a Plena Voice Alarm System,

laptop or printer.

LSN 0300 A LSN improved

Module 300mA

Connection of an LSN loop with up to 254LSN

improved elements or 127LSN classic elements at a

maximum line current of 300mA

LSN 1500 A LSN improved

Module 1500mA

Connection of an LSN loop with up to 254LSN

improved elements at a maximum line current of

1500mA or 127LSN classic elements at a maximum

line current of 300mA

NZM 0002 A Notification

Appliance Zone

Module

Allows connection of two conventional, monitored

notification appliance circuit lines

RMH 0002 A Relay Module Monitored connection of external elements with

feedback, with two changeover contact relays

suitable for switching mains voltage

RML 0008 A Relay Module For low voltage switching, with eight changeover

contact relays

Further information can be found in Functional Modules, page 99.

The technical data can be found in Housing and Accessories, page 146.

Notice!

Planning Software by Bosch can be used to plan fire alarm systems that conform to the

relevant limits (e.g. in terms of cable length and power supply).

Other manuals for FPA-5000

Table of contents

Other Bosch Control Panel manuals

Bosch

Bosch AVENAR Series User manual

Bosch

Bosch D7212GV3 Quick start guide

Bosch

Bosch Rexroth IndraControl VAM 11.1 Technical manual

Bosch

Bosch ICP-AMAX4-P1 User manual

Bosch

Bosch Radionics D8024 Quick start guide

Bosch

Bosch Solution 6+6 Wireless AE User manual

Bosch

Bosch D9112B Troubleshooting guide

Bosch

Bosch Rexroth IndraControl VR 21 Series User manual

Bosch

Bosch Solution 6+6 Wireless On/Off User manual

Bosch

Bosch FPA-5000 User guide

Bosch

Bosch D7212 User manual

Bosch

Bosch ICP-CC488 User manual

Bosch

Bosch MPC-xxxx-C Series User manual

Bosch

Bosch ICP-CC404 User manual

Bosch

Bosch CP1 User manual

Bosch

Bosch HPC 400 User manual

Bosch

Bosch FPA-5000 User manual

Bosch

Bosch B9512G User manual

Bosch

Bosch Rexroth IndraControl VCP 05 Technical manual

Bosch

Bosch B9512G-E User manual

Bosch

Bosch Rexroth IndraControl VDP 80.1 Series User manual

Bosch

Bosch 2000 Series Troubleshooting guide

Bosch

Bosch DS12R Operating instructions

Bosch

Bosch Radionics D8024 Manual

Popular Control Panel manuals by other brands

RDZ

RDZ PC-HRX user manual

STG-BEIKIRCH

STG-BEIKIRCH MZ3 operation instruction

Efka

Efka Variocontrol V810 instruction manual

Cebora

Cebora 208-10 instruction manual

AMX

AMX AutoPatch CP-15 instruction manual

Satel

Satel CA-6 KLED-S user manual

Evolution

Evolution IQ plus 800 installation manual

Fagor

Fagor 8040 TCO CNC operating manual

Trane

Trane ComfortLink II XL950 Control user guide

AKO

AKO PROCool AKO-17635-2 quick guide

ABB

ABB 6136/30M-101 operating instructions

Telikou

Telikou BK-603 Belt Pack instruction manual

Mapei

Mapei Mapeheat Thermo Touch user guide

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 user manual

Sminn

Sminn BOX L VF1L EI instruction manual

Balboa

Balboa TP600 user manual

Nice

Nice HSCU1 Instructions and warnings for installation and use

Truma

Truma CP plus installation instructions