BKS-UVRobot_Product Manual
BooCax 1/ 23 boocax.com
Precautions for Safety and Use
Thank you for purchasing BooCax robot. Please read this manual carefully before using it.
The use of robot shall follow the operation instructions. Use beyond the range is prohibited!
BooCax will not assume any responsibilities for the losses caused by improper operation.
01/ Precautions for Safety
1) Prohibitions
①Person or animal should keep away from the working robot to avoid hurt to eyes or skin;
②Do not touch the UV tube with hands to avoid any damage to the tube;
③Do not use in flammable gas environment or similar flammable and explosive
environment;
④Do not wrap the tube with paper or cloth, to avoid fire due to high temperature;
⑤Do not replace any parts. If necessary, please do so under the direction of BooCax.
2) Precautions
①The robot should be parked or run in a flat and solid place at normal temperature;
②If there is abnormal noise during working, please immediately turn off the robot and
report to the after service;
③Before starting the robot, please check whether the safety components (sensor,
emergency stop switch, etc.) Are in normal conditions;
④If the floor is waterlogged and greasy, please clean the floor promptly;
⑤The robot body must be maintained by a trained professional.
02/Routine maintenance
When performing routine maintenance, please make sure that the robot is turned off, unplugged
or away from the charging pile! Otherwise, electric shock or serious failure may occur.
1) Cleaning
①Wipe clean the body part and UV tube gently with non-dust cloth every week;
②Regularly brush the surface of the driving wheel and universal wheel;
③Regularly contact after-sales for maintenance services such as lubrication, dust-cleaning
at the damping spring and universal wheel bearing;
④Lidar sensor, as the expensive precision component in robot, should be wiped regularly
with a non-dust cloth. Do not wipe with force or other detergent, which may be easy to
cause functional damage.
⑤If the robot will not be used for a long time, store it in a dry and cool place.
2) Check whether the screw is loose
Shake the components gently on a regular basis to observe whether they are loose. If there is
any abnormal sound, please check the screws at the installation position of relevant
components. All the screws of the robot have undergone anti-loosening treatment. However,
for the sake of safety, please contact "BooCax After-sales" if any screw is found loose.
03/Disclaimer
