BOOCAX BKS-ST-180C User manual
BKS-ST-180C
Product Manual
V3.1.1
BOOCAX
Better Robot,Better Life
BKS-ST-180C_Product Manual
BooCax 1/ 28 boocax.com
Safety and Precautions
The use of spray robot shall follow the operation instructions. Use beyond the range is prohibited!
BooCax will not assume any responsibilities for the losses caused by improper operation.
Symbols:
indicates prohibited acts.
⚠
indicates danger, warning and attention.
PROHIBITIONS
•Keep out DURING SPRAYING;
•Do not use in flammable gas environment;
•Do not add any additive of unknown source into the water tank;
•Do not clean or add water when the robot is powered on;
•Do not disassemble the robot for repair or debugging;
•Do not touch the terminals when the robot is under charge to avoid short circuit or electric
shock;
•Do not replace any parts. If necessary, please do so under the direction of BooCax.
⚠
PRECAUTIONS
•The spray robot should be parked in a flat and solid place at normal temperature;
•When adding liquid, do not splash liquid into the robot;
•If there is odor or abnormal noise DURING SPRAYING, please immediately turn off the robot
and report to the After Service;
•Before starting the robot, please check whether the safety components (sensor, emergency
stop switch, etc.) are in normal conditions;
•If the floor is waterlogged and greasy, please clean the floor promptly;
•Before removing any parts, please confirm that the power is off;
•The robot body must be maintained by a trained professional.
BKS-ST-180C_Product Manual
BooCax 2/ 28 boocax.com
Contents
1. Introduction to Spray Robot ............................................................................................... 3
2. Product specification.......................................................................................................... 5
3. Appearance size................................................................................................................... 6
4. Function module.................................................................................................................. 7
5. Assembly................................................................................................................................. 9
6. Preparation before use.....................................................................................................12
6.1. Install the charging pile...................................................................................................................... 12
6.2. Clean up barriers.................................................................................................................................. 13
6.3. QR code deployment ......................................................................................................................... 13
6.4. Download mobile App....................................................................................................................... 15
6.5. Turn on, connect the robot .............................................................................................................. 15
6.6. Build the spraying map...................................................................................................................... 17
6.7. Deploy route setting........................................................................................................................... 18
6.8. Area setting............................................................................................................................................ 21
6.9. Scheduled setting................................................................................................................................... 22
6.10. Other settings ..................................................................................................................................... 22
7. Start to work .......................................................................................................................23
7.1. Add liquid............................................................................................................................................... 23
7.2. Start spraying ........................................................................................................................................ 24
Attachment: update instructions..............................................................................................25
BKS-ST-180C_Product Manual
BooCax 3/ 28 boocax.com
1. Introduction to Spray Robot
Product Features
①The spray volume is up to 2600 ml/h, with the atomized particles less than 10 microns;
②The spray diameter is 5～6 m, leaving no dead corners in the spraying area;
③16 L large-capacity tank covers a spraying area up to 20000 ㎡;
④It is simple to use with mobile App control and supports two spraying modes: regular spraying,
immediate spraying;
⑤It can automatically detect the obstacles without manual monitoring, thus reducing the burden
on personnel;
⑥The autonomous navigation function enables a full coverage of the spraying area;
⑦With 4.5 hours of battery life, repeated charging is not needed;
⑧Automatic return for charging spares the trouble of artificial assistance for charging;
⑨When the liquid is lower than the warning level, the robot will automatically close the spray
device and returns to the charging pile.
BooCax BKS-ST-180C atomizing spray robot is
designed to purify the air by rapidly atomizing the liquid
and automatically spraying the area.
This robot can automatically navigate to the area for
full-coverage spraying, and supports mobile App control to
achieve man-machine separation and minimize personnel
exposure, so that the use safety is greatly improved. With
simple structure, it is easy to maintain and manage.
The spray robot is widely applicable to hospitals,
airports, office buildings, shopping malls, schools, factories
and other public places.
BKS-ST-180C_Product Manual
BooCax 4/ 28 boocax.com
Suggestion for use
User type
Spraying scenarios
Suggestion for use
Medical
institution
•Hospital
•Clinic
Registration hall, waiting
hall, internal working area,
canteen, fever clinics,
warehouse, etc.
✓Medical institution level.
Station
•Railway station
•Bus station
•Subway
•Airport
Five accesses and one
platform (station entrance,
ticket gate, elevator
entrance, station exit,
platform), waiting room
(airport lounge)
✓Real-time spraying at
"five accesses and one
platform": medical
institution level;
✓Regular spraying in
waiting room: public
health security level.
School
•Kindergarten
•Primary and
secondary school
•University
Lecture hall, library, indoor
sports hall, classroom,
laboratory, toilet, cafeteria,
office area, etc.
✓Daily scheduled spraying:
public health security
level.
Office
area
•Office building
•Office block
•Administration
service hall
•Bank outlet
Toilets, halls, corridors,
elevator rooms, offices, etc.
✓Real-time spraying at
entrance/exit: medical
institution level;
✓Daily scheduled spraying:
public health security
level.
Shopping
mall
•Shopping mall
•Supermarket
•
Entrance/exit, counter, rest
area, service desk, cashier
desk, elevator, and other
public areas
✓Real-time spraying at
access and in other
crowded areas: medical
institution level;
✓Scheduled spraying in
other areas: public health
security level.
Hotel
•Guesthouse
•Hotel
Hotel lobby, toilet, floor
corridor, guest room,
restaurant, etc.
✓Spraying in guest room
and restaurant: medical
institution level.
✓Spraying in other areas:
public health security
level.
BKS-ST-180C_Product Manual
BooCax 5/ 28 boocax.com
2. Product specification
Name
Spray Robot
Model
BKS-ST-180C
Application
Indoor automatic atomizing spray
Appearance size
Diameter 530 mm* Height 1,340 mm
Body weight
48.4 kg (without liquid)
Spray rate
Maximum 2600 ml/h (adjustable)
Tank volume
16L
Spray diameter
≤6 m
Spray mode
Four-direction nozzle or One-direction nozzle
Movement mode
Autonomous path planning and auto-navigation
Moving speed
0.3 m/s
Obstacle surmounting
ability
≤15 mm
Gradeability
≤8°
Travel lane width
≥750 mm
Noise
≤50dB
Continuous running hours
4.5hours
Charging mode
Auto-charge
Charging time
3hours（0-80%）
Charging pile
INPUT:110V-220V AC
OUTPUT:DC29.4V⎓8.0A
Safety protection
low water alarm
BKS-ST-180C_Product Manual
BooCax 6/ 28 boocax.com
3. Appearance size
Overall size
Front Back
BKS-ST-180C_Product Manual
BooCax 7/ 28 boocax.com
4. Function module
Front
Charging connector
Mist tube
Liquid level observation hole
Chassis
Filling hole
Four-way nozzle
Spray volume knob
Tank
Working status indicator
One-way nozzle
BKS-ST-180C_Product Manual
BooCax 8/ 28 boocax.com
Back
Power switch
Tank
Chassis
Air inlet
Emergency
stop button
Filling hole
Vision sensor
BKS-ST-180C_Product Manual
BooCax 9/ 28 boocax.com
5. Assembly
Step 1: Unpack and check materials
The packaging of this product consists of two boxes, with the larger box for the chassis and
charging pile, and the smaller box for the robot body. After unpacking, check the materials and
accessories against the Nos.1-8 in the figure below for any missing or damage.
Step 2: Install the sprayer
①Take out the chassis and place
it on the floor stably, make sure
that the lower charging mouth
is facing forward, pull out the
two connectors (Terminal 1:
signal wire, Terminal 2: power
wire), and visually find the four
positioning holes on the iron
plate →
Table of contents
Other BOOCAX Robotics manuals
