Boneco S250 User manual

Other manuals for S250

6

Table of contents

Popular Humidifier manuals by other brands

Bionaire

Bionaire CM1 Instruction leaflet

Air-O-Swiss

Air-O-Swiss AOS 7131 Instructions for use manual

KING

KING K 5002 Rainbow instruction manual

Crane

Crane EE-6902 instruction manual

Glaziar

Glaziar Ness user manual

Philips

Philips DreamStation Go Faqs

Honeywell

Honeywell MISTMATE HUL520BC manual

Stadler Form

Stadler Form Hera Operation instructions

Hunter

Hunter 31206 owner's guide

TaoTronics

TaoTronics TT-AH004 user guide

adorini

adorini Cigar Heaven manual

Lanaform

Lanaform Aroma user manual

Aprilaire

Aprilaire 800 Series user manual

Pyle

Pyle SereneLife PHUMDIF8 Instruction book

Trotec

Trotec B 200 operating manual

Pure Humidifier

Pure Humidifier EC Series installation instructions

Crane

Crane EE-864 instruction manual

air&me

air&me Solnan user manual

S250

MANUAL

READ AND SAVE THESE INSTRUCTIONS

11

en

BONECO S250

INSTRUCTIONS FOR USE

12

en ITEMS INCLUDED AND TECHNICAL DATA

BONECO S250 1 ×anti-mineral pad Printed quick start guide

1 ×CalcOff®

TECHNICAL DATA*

Mains voltage 220V / 50 Hz

Power consumption 145W/285 W

Humidity output 6.8 liters (1.8 gal)

For rooms up to 40 m2/100 m3(430 sq ft/3531 ft3)

Water capacity 3.0 liters (0.8 gal)

Dimensions L×W×H316×172×281 mm (12.4×6.8×11 in.)

Weight (empty) 2.5 kg (5.5 lb)

Operation noise level <35 dB(A)

System Steamer

* Subject to change

ITEMS INCLUDED

13

en

OVERVIEW AND PART NAMES

5

6

1

2

3

41Water tank inspection glass

2Operation indicators

3Control panel

4Steam outlet

5Water tank

6Air inlet

14

en PUTTING INTO OPERATION

Plug the power cord into a power outlet.

Place the BONECO S250 on a stable surface. Fill the water tank with cold tap water.

1

4

2 3

5 6

Control the steam output using the button. Select the desired humidity level using the

and buttons.

Switch on the BONECO S250 by pressing the

button.

15

en

DISPLAY AND HANDLING

Symbol Meaning

Humidity

Display shows the current humidity

Display shows the set humidity

High (H) or low (L) steam output

Note: Refill the water

Note: Cleaning required

Button Function

On/Off, starts cleaning function

Controls steam output

Sets the desired humidity

Overview of all indicators on the display

16

en HANDLING

CONTROLLING HUMIDITY

The BONECO S250 is equipped with a hygrostat that con-

tinuously monitors the humidity in the room and regulates

the unit's operation. The adjustable range is between

30% and 70%.

1. Switch on the BONECO S250.

2. Use the and buttons to set the desired hu-

midity. The display shows the note ("de-

sired").

3. A few seconds after the last input, the display

changes back to . The display now shows

the current humidity again.

The BONECO S250 stops humidification once the desired

value is reached. Humidification continues automatically

as soon as the set value is no longer met.

REGULATING OUTPUT

The performance of the BONECO S250 is regulated in

two levels.

1. Press the button to switch between the two per-

formance levels.

The selected level is shown on the display by the symbols

(“High”) and (“Low”).

The selected level does not affect the measurement or the

control functions of the hygrostat.

17

en

SAFETY INSTRUCTIONS

Always unplug the BONECO S250 before you start

cleaning it! Failure to do so can result in electric

shock and fatal injury!

Do not use alcohol or corrosive cleaning agents for

cleaning.

CLEANING THE HOUSING

In most cases, a dry cloth can be used for cleaning. If

stubborn dirt is present, clean the housing using a damp

cloth. Add a small amount of dishwashing detergent to

the water. Household cloths and window cleaners can

also be used.

REPLACING THE ANTI-MINERAL PAD

The anti-mineral pad absorbs lime in the water so that it

is not released into the ambient air. Over time, the anti-

mineral pad becomes hard and less effective due to the

absorbed lime.

Check the anti-mineral pad after each cleaning. Replace

the anti-mineral pad if it feels hard and rigid. You can find

replacements at your BONECO specialist dealer or in our

online store at this address: www.shop.boneco.com

CLEANING

18

en

PROCEDURE

Although the anti-mineral pad absorbs most of the lime

in the water, the heating plate of the BONECO S250 ex-

periences calcification after an extended operating time.

An upcoming need for cleaning is indicated on the display

by the symbol.

To make descaling easy and convenient, the BONECO

S250 is equipped with an automatic cleaning function.

This warms and cools the heating plate multiple times in

order that the lime becomes crumbly and can be easily

removed.

STARTING THE CLEANING

1. Switch off the BONECO S250 and let it cool down for

1 hour.

2. Remove the anti-mineral pad and empty the water

tank.

3. Mix 1 bag CalcOff®with 1 liter (about 1 quart) of

warm tap water.

4. Add the mixture to the BONECO S250.

5. Press the button for 3 seconds to start the clean-

ing.

6. Select the duration of cleaning you want (1 to 9 hours)

using the and buttons. If stubborn mineral de-

posits are left after cleaning, you can always extend

or repeat the cleaning process.

7. Unplug the BONECO S250 and rinse the water tank

with tap water.

8. Place the anti-mineral pad back into the water tank.

CLEANING FUNCTION

V-00

www.boneco.com

BONECO is a registered trademark of BONECO AG, Switzerland