BODYFLEX RUN1500 User manual

RUN 1500
MOTORIZED TREADMILL
Art. BF4003
Please read this instruction carefully before using this product and keep it safe

2
1. Directory
Serial
Number
Content
1
Directory
2
Safety Tips
3
Packing details
4
Assembly instructions
5
Electrical controlinstructions
6
Maintenance guidelines
7
General troubleshooting
8
Maintenance clauses
9
Exercise Notes
10
Warming exercise
Welcome to choose this home electric treadmill made-in-china, our products will improve your
health, the more familiar you are with this treadmill, you will find it easy to use, so we ask you
read this manual carefully before using. All parts of this machine are made of high quality
materials, and after strict inspection& testing, the product quality can be guaranteed to the
greatest extent. Refer to this manual to guide you to install, use and maintain this machine
correctly.
2. Safety tips
This machine is designed and manufactured to consider a lot of safety issues, in order to ensure
your safety, before operating this machine, be sure to read all the contents of this manual, just
in case. We do not bear the consequences of any abnormal operation.

3
Danger
Do not hold heart rate devices and other wireless heart rate devices at the same time,
otherwise it will cause electrical interference.
Warning
1. Before using this machine, please ensure that the machine is fully grounded to avoid accidents and
hazards
2. When running, please clip the safety lock (red) clamp in the appropriate position of the clothes to
facilitate the emergency to pull off the safety lock and stop the machine to ensure safety.
3. a、consult your health care doctor before exercise,.
b、wear suitable sportswear for exercise.
c、the room to keep clean and tidy, to avoid electrostatic adsorption into the treadmill, resulting in machine
operation failure.
4. This product is for one person at run time. Do not let children or pets play nearby to avoid accidents.The
minimum spacing requirement (i.e. distance from wall and furniture) is not less than 100 for front and side
respectively CM, and 200 CM. For rear.
5..If the power cord is damaged, do not use this machine.
6. If the machine is damaged and broken, do not use the machine, and immediately contact the local dealer
for maintenance.
7. Do not touch any parts in motion by hand, and do not press or plug any objects into the machine.
8.This machine is applicable to indoor household, not in outdoor and gym use.
9. Please place the machine on a clean and flat ground, keep the ventilation condition of the
machine in good condition, make sure there are no sharp items nearby, do not use it near the water source
and heat source.
10. Please use handrails when up and down the machine, when the walking machine is not completely
stable, do not get off the machine. If you need an emergency jump, you must unplug the safety
lock:the treadmill stopsimmediately.
11. Do not operate the machine when the exerciser is using oxygen equipment or spray near the machine.
12.In order to maintain the normal operation of the machine, do not install any accessories provided by the
factory.
13. All parts of the machine must be firmlyinstalled.
14. After using the treadmill, please turn off the power and unplug in time.

4
3. Packing details
Serial
number
Components
1
Main frame
2
Electronic watch frame
3
Base edge tube
3
Instructions
4
Screw bag
Accessories
Serial
number
Components
Qt’y
A
Safety Key
1pcs
B
6 mm Hexagon wrench
1pcs
C
Lubricating oil
1bottle
D
M8*16 semi-round head hexagonal bolts
4pcs
E
M8 flat washer
10pcs
F
M8*55 Hexagon socket head bolts with semi-round head
4pcs
G
M8 Hexagonal lock nut
4pcs
H
Open-end wrench 13-14 (thickness 2.5mm)
1pcs
I
5mm Allen Wrench
1pcs
J
M8*16 external hexagon bolts
2pcs
K
latch
1pccs

5
NO.
Name
Specification
Qty
NO.
Name
Specification
Qty
1
Base frame
1
42
Cylindrical head
hexagon bolts
M8*25 full tooth electrophoresis
black with 5mm spanner
3
2
Upright tube
1
43
Countersunk head
internal anglebolts
M6*20 full tooth electrophoresis
black
8
3
Motor base
1
44
Ring-shaped
wire-guard plugs
2
4
Running board
support tube
1
45
Phillips pan head
tapping screws
ST4.0*16 full tooth electrophoresis
black
25
5
Running board
t12*497*1025
1
46
Cross washer head
tapping and self-drilling
screws
ST4.2*16 Full tooth Electroplated black
11
6
Running belt
t1.4*403*2325
1
47
Crossed pan head
tapping screws
#2.3*6 full tooth white zinc plated
13
7
Front roller
80*∮42*435*∮
15*464*M8Electrophoresis
1
48
Cross washer head
tapping screws
ST4*16 Full tooth Electroplated black
2
8
Rear roller
∮42*430*∮
15*487*2-M8Electrophoresis
1
49
Cross washer head
tapping screws
ST2.8*8 full tooth white zinc plated
4
9
Refueling pipe
∮8*t0.92*230 Need to curved
1
50
Crossed pan head
tapping screws
#4*10 full teeth electrophoresis black
10
10
Allen wrench
6# :90*90mm One end cross tip
galvanised
1
51
Cross washer head
tapping screws
ST4*10 full teeth electrophoresis black
5
11
Multi-ribbed belt
J140 (356) 4groove 5peak black
1
52
Flat washers
φ8*φ16*1.2
12
12
Electronic watch
upper cover
616*539*123
1
53
Spring washers
φ8.1*φ12.3*T2.1
2
13
Motor upper cover
509*231*75
1
54
Hexagon lock nuts
M8 opposite side 13
7
14
Electronic watch
lower cover
500*99*35
1
55
Hexagon lock nuts
M10
2
15
Left handle bar
rear cover
198*43*65
1
56
Cross washer head
tapping and self-drilling
screws
ST4.2*19 full tooth electrophoresis
black
2
16
Motor lower cover
495*233*42
1
57
Hexagon bolts
M8*50 full tooth electrophoresis black
1
17
Rear protector
cover
5*71.5*81(Left and right )
1pair
58
Hexagon nuts
M8
1
18
Left-side plastic
trim
24*50*1044
1
59
Crossed pan head triple
combination bolts with
flat washers and spring
washers
M4*12 Full tooth White zinc plated
2
19
Right-side plastic
trim
24*50*1044
1
60
Limit spacers
#13*#8.2*10 Electroplated black
2
20
Right handle bar
rear cover
198*43*65
1
61
Caps for bolts
with external hexagonal bolt head M8
(opposite side 13)
1
21
Transport wheel
∮50*∮8.2*22
2
62
Hexagon bolts with
semi-round head
M8*55 half tooth Electroplated black
with 5mm spanner
4
22
R clamp
UC-0 white
2
63
Double-sided adhesive
2
23
Controller
Optional 110V/220V
1
64
Magnetic rings
1
24
Conical foot pad
∮43*∮23*∮4.5*16
8
65
Hexagon socket head
bolts with semi-round
head
M8*16 full tooth electroplated
black with 6mm spanner
4

8
25
Refueling
decorative cover
With ∮16.5round hole
1
66
Butt lock screws
M8*25-M6*12
2
26
Cable ties
2*150
4
67
Counter lock screws
M8*35-M6*12
2
27
Power switch
15A/250V With red light
1
68
Cross countersunk head
self-tapping screws
4*35
4
28
Overload protector
Input 220V:6A,125/250VAC
1
69
Cap nuts
M8 opposite side 13
2
29
Power cable
3*0.75mm2 10/15A 250V Black
Length1500mm
1
70
Pull ring latch
∮8*38
2
71
Conical latch
∮8*50
1
30
Power cable clasp
6N-4 black
1
72
Open-end spanners
13-14
1
31
Single line
3*1.0mm2 10/15A Length200mm
1
73
Cross washer head
tapping screws
ST2.8*8
10
32
Single line
3*1.0mm2 10/15A length200mm
1
74
Cross washer head
tapping screws
ST2.3*10
2
33
Single line
3*1.0mm2 10/15A length100mm
1
75
Cross washer head
tapping screws
ST2.3*8
6
34
DC motor
1
76
Base frame left tube
1
35
Safety key
42*16*14
1
77
Base frame right tube
1
36
Cylindrical head
hexagon bolts
M8*90 half tooth electroplated
black with 6mm spanner
1
78
3-step manual incline
2
37
Cylindrical head
hexagon bolts
M8*90 full tooth electroplated black
with 6mm spanner
2
79
Adjustment wheel
∮28*∮8.2*20
2
38
Cylindrical head
hexagon bolts
M8*40 half tooth electroplated
black with 6mm spanner
1
80
Square inner tube
plug
With 30*30*T1.5 tube
1
39
Hexagon socket
head bolts with
semi-round head
M10*80 half tooth electroplated
black with 6mm spanner
2
81
Cable ties
5*300
1
40
Hexagon socket
head bolts with
semi-round head
M8*35 half tooth electroplated
black with 5mm spanner
2
82
Hexagon socket head
bolts
M8*50 half tooth electroplated
black with 5mm spanner
2
41
Cylindrical head
hexagon bolts
M8*35 full tooth electroplated black
with 5mm spanner
1

9

10
1
2
3
Asembly instructions
Step 1:Take out main frame and electronic watch from the carton and open the bundling harness of the
treadmill frame.
Step2:Unfolding the frame:When unfolding, please stand the machine up in the direction of the arrow
(as shown in Figure 1), and then place the frame flat on the floor in the direction of the arrow (as shown in
Figure 2 and Figure 3)。
Step 3:Put the base frame side pipe into the base frame in the direction of arrow, and fix the F#
semi-round head hexagonal bolts (4), G# hexagonal lock nuts (4) and E# flat washers (4) on the
base frame, then fix the base frame side pipe and base frame with J# hexagonal screws (2) and E#
flat washers (2), and insert the K# pins from the bottom of the column into the holes of the iron
sheet at the front end of the running table (as shown in the figure).

11
D
E
EDDE
E
Note: B#6mm hexagonal wrench and I#5mm hexagonal wrench are needed here
Step 4:Attach the side cover to the upright tube and base frame with Flat Washer
E#M8(4pieces),D#M8*16(4pieces).
Step 5: Before use: press the start button while the electronic watch is turning on ,the treadmill start to
work.
Note: the safety key must be placed on the yellow sticker position in the middle of the meter, the treadmill
can start to work normally; if the electronic watch window shows "E07", the safetykey is not placed or not
in place.

12
Safety key:Put
the iron suction the meter label
Emergency stop function: when the safety key is off power, the power lead is disconnected and the weak
part keeps the power supply. The operation is not controlled by software.
For your safety,be sure to use the safety key while training exercise.
Please note:Tight all screws after confirming that all the screws are installed in accordance with the above
requirements, and check if there are omissions before you connect to the power lead.
Step 6: treadmill folding: when you need to carry or not use this treadmill for a long time,please follow the
below introduction.Stand behind the treadmill and begin to raise the deck in the direction of arrow.Hold the
frame,pull out the spring pull pin(showas below photo)put down the running board until you hear a
“click” it is finished.
Treadmill unfolding:Pull out the pull pin rod on the column by hand, , you can unfold the treadmill.
This manual suits for next models
1
Table of contents
Languages:
Other BODYFLEX Treadmill manuals
Popular Treadmill manuals by other brands

Smooth Fitness
Smooth Fitness EVO 3i user manual

NordicTrack
NordicTrack NETL81810.0 user manual

Schwinn
Schwinn 830/Journey 8.0 Assembly manual / owner's manual

Keys Fitness
Keys Fitness HealthTrainer HT-740T owner's manual

Spirit
Spirit XT8 Service manual

NordicTrack
NordicTrack T 14.0 Treadmill Manuel de l'utilisateur













