BN Thermic CH-1500 User manual

BN Thermic Ltd

34 Stephenson Way

Three Bridges, Crawley

West Sussex RH10 1TN

England

Tel: +44 (0)1293 547361

Fax: +44 (0)1293 531432

CH –Ceramic Heater

Before installing this heater, please read all the enclosed instructions carefully and follow any recommendations

regarding installation and use.

Electrical installation

Heaters are factory fitted with high temperature silicon rubber flexible cable conforming to BS 6500 having a

temperature rating of 180°C continuous.

Appliances must be earthed.

The CH fitting has been packed with a separate wall mounting bracket ready for attachment to the heater.

Place heater face down and attach one ‘U’ bracket to back. Make sure cable gland is towards the bottom of the heater.

Location

Heaters should be angled at 30° to 45° from the vertical whether wall or ceiling mounted.

There must always be a minimum clearance of 450mm between top of heater and ceiling.

Wall mounting

Decide whether vertical movement only (Diagram A) or vertical/horizontal movement (Diagram B) is required for

correct positioning of heaters and assemble as shown.

Avoid mounting heaters on structures liable to vibrate.

Recommended mounting heights and safety distances should always be observed.

Recommended Wall Mounting Heights

Model

Wall Mounting Height

(Metres)

Safety Distance from

Heater (Metres)

Minimum

Recommended

Maximum

Minimum

CH-1500

2.2

2.5

3.5

1.5

CH-3000

2.8

3.5

4.5

1.5

BNTMCH02

Commissioning

Perform Insulation and Earth continuity Tests.

Switch on heater(s) and confirm that Ceramic element(s) operating.

Ensure each heater aims its warmth into the target area by adjusting heater angle(s) as necessary then tighten

bracket bolts when satisfactory coverage is achieved.

The user/customer should be made aware of all aspects of operation and safety and strongly advised to retain these

instructions for reference.

In unoccupied premises it is recommended that the heating system is switched off and isolated from the electrical

supply.

Maintenance

Ceramic Heaters contain no moving parts and therefore very little maintenance is required other than to ensure that there is no

excessive build-up of dust/dirt on the reflectors or Ceramic elements especially after a long period of non-use can cause

overheating and premature ceramic failure. Depending on siting conditions a heater should be regularly inspected, but at least

once per year.

Before any maintenance work is carried out

Allow heater case/element to cool to avoid injury.

Always isolate appliance(s) from electrical power supply.

Spares

Spare Ceramic elements and reflectors are available –contact your supplier for details.

This manual suits for next models

Table of contents

Other BN Thermic Heater manuals

BN Thermic

BN Thermic SMH-30 User manual

BN Thermic

BN Thermic CAD-60 User manual

BN Thermic

BN Thermic SCHG-45 User manual

BN Thermic

BN Thermic SystemX XR-60 User manual

BN Thermic

BN Thermic CHS-30S User manual

BN Thermic

BN Thermic OUH2 Series User manual

BN Thermic

BN Thermic SMH-60 User manual

BN Thermic

BN Thermic SWD Series User manual

BN Thermic

BN Thermic System X XAS-45 User manual

BN Thermic

BN Thermic RP3 Series User manual

BN Thermic

BN Thermic SystemX XC-45 User manual

BN Thermic

BN Thermic HWP2-45 Series User manual

BN Thermic

BN Thermic BLS Series User manual

BN Thermic

BN Thermic SMH-45 User manual

BN Thermic

BN Thermic OUH3-40 User manual

BN Thermic

BN Thermic 800 Series User manual

BN Thermic

BN Thermic SMH-45T User manual

BN Thermic

BN Thermic SCHG-45T User manual

BN Thermic

BN Thermic OUH2-3W Series User manual

BN Thermic

BN Thermic HN3-30L User manual

BN Thermic

BN Thermic SMH-30T User manual

BN Thermic

BN Thermic HCA-09 User manual

BN Thermic

BN Thermic SWD Series User manual

BN Thermic

BN Thermic SMH-45T User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide

iLO

iLO IHP2424 User and installation manual