©Bluefin Payment Systems, 2016
All Rights Reserved
Authorizations do not settle
unless manually captured.
1) Initiate transaction in software or POS, terminal will ask for card to be
swiped
Manually capture an existing
authorization.
1) Initiate transaction in software or POS, terminal will ask for card to be
swiped
2) Swipe or key card
3) Enter auth code into terminal
4) Press the green Enter button on the keypad
NOTE: Batches are closed
within Bluefin’s PayConex
backend system, these
instructions are to clear
transactions out of the
terminal
1) Press “Menu” on the screen
2) Enter “1” for password (unless you’ve changed it)
3) Press the green Enter button on the keypad
4) Press “4” for “Host Settings”
5) Enter “1” for password (unless you’ve changed it)
6) Press the green Enter button on the keypad
7) Press the down arrow on the screen
1) Press “1” for “Batch Close”
SETTINGS
Make certain
transaction types
password protected
1) Press “Menu” on the screen
2) Enter “1” for password (unless you’ve changed it)
3) Press the green Enter button on the keypad
4) Press 2 for “Merchant Settings”
5) Press 1 for “Authorization”
6) Enter “1” for password (unless you’ve changed it)
7) Press the green Enter button on the keypad
8) Press 1 for “Transaction Types”
9) Choose the transaction type you want to make password-protected; on the next
screen you will specify further
10) Choose whether returns, sales, etc. should be password protected
11) Press 3 for “Pswd Protected”
Enabling or disabling
address verification
(AVS) settings
1) Press “Menu” on the screen
2) Enter “1” for password (unless you’ve changed it)
3) Press the green Enter button on the keypad
4) Press the down arrow on the screen
5) Press “1” for “System Settings”
6) Press “3” for “Working Mode”
7) Enter “1” for password (unless you’ve changed it)
8) Press the green Enter button on the keypad
9) Press “2” for “Fraud Control”
10) Select the option you want to change –most likely “3” for “AVS On CardNotPrsnt”
11) On the next screen select the card types you want to include –most likely 1 for “All”
12) Select which items you want to turn AVS on for on the following screen
Disable or enable
the beeping noise
1) Press “Menu” on the screen
2) Enter “1” for password (unless you’ve changed it)
3) Press the green Enter button on the keypad
4) Press 3 for “Operations Settings”
