Black Box LGB6026A User manual

BL A C K B OX®

This smart, stackable switch offers 10-Gbps uplinks

plus full SNMP and Web management.

Gigabit L3 Managed Switch with 10G Uplinks, 24-Port or 48-Port

LGB6026A LGB6000SC-001

LGB6050A LGB6000SC-004

LGB6001C

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

724-746-5500 | blackbox.com

Page 2

724-746-5500 | blackbox.com

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

724-746-5500 | blackbox.com

724-746-5500 | blackbox.com Page 3

LGB6026A GIGABIT ETHERNET SWITCH: LGB6050A GIGABIT ETHERNET SWITCH

Layer 3 Stackable Gigabit Ethernet Switch Layer 3 Stackable Gigabit Ethernet Switch

with 20 10/100/1000BASE-T (RJ-45) Ports, with 44 10/100/1000BASE-T (RJ-45) Ports,

4 Gigabit Combination Ports (RJ-45/SFP), 4 Gigabit Combination Ports (RJ-45/SFP),

2 10-Gigabit Extender Module Slots, 2 10-Gigabit Extender Module Slots,

and 2 Stacking Ports and 2 Stacking Ports

LGB6001C LGB6000SC-001 LGB6000SC-004

10G Uplink Module 1-ft. (0.3-m) Stacking Cable 4-ft. (1.2-m) Stacking Cable

We‘re here to help! If you have any questions about your application

or our products, contact Black Box Tech Support at 724-746-5500

or go to blackbox.com and click on “Talk to Black Box.”

You’ll be live with one of our technical experts in less than 30 seconds.

TALLATION

UIDE

LGB6026A GIGABIT ETHERNET SWITCH

Layer 3 Stackable Gigabit Ethernet Switch

with 20 10/100/1000BASE-T (RJ-45) Ports,

4 Gigabit Combination Ports (RJ-45/SFP),

2 10-Gigabit Extender Module Slots,

and 2 Stacking Ports

LGB6050A GIGABIT ETHERNET SWITCH

Layer 3 Stackable Gigabit Ethernet Switch

with 44 10/100/1000BASE-T (RJ-45) Ports,

4 Gigabit Combination Ports (RJ-45/SFP),

2 10-Gigabit Extender Module Slots,

and 2 Stacking Ports

LGB6026A

LGB6050A

COMPLIANCES AND SAFETY

STATEMENTS

FCC - CLASS A

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment

is operated in a commercial environment. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to

cause harmful interference in which case the user will be required to correct the

interference at his own expense.

You are cautioned that changes or modificationsnot expressly approved by the

party responsible for compliance could void your authority to operate the

equipment.

You may use unshielded twisted-pair (UTP) for RJ-45 connections - Category 3

or better for 10 Mbps connections, Category 5 or better for 100 Mbps

connections, Category 5, 5e, or 6 for 1000 Mbps connections. For fiber optic

connections,

you

may use 50/125 or 62.5/125 micron multimode fiber or 9/125

micron single-mode fiber.

INDUSTRY CANADA - CLASS A

This digital apparatus does not exceed the Class A limits for radio noise

emissions from digital apparatus as set out in the interference-causing

equipment standard entitled “Digital Apparatus,” ICES-003 of the Departmentof

Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables

aux appareils numériques de Classe A prescrites dans la norme sur le matériel

brouilleur: “Appareils Numériques,” NMB-003 édictée par le ministère des

Communications.

JAPAN VCCI CLASS A

– 5 –

OMPLIANCES

AND SAFETY

TATEMENTS

CE MARK DECLARATION OF CONFORMANCE FOR EMI AND SAFETY (EEC)

This information technology equipment complies with the requirements of the

Council Directive 89/336/EEC on the Approximation of the laws of the Member

States relating to Electromagnetic Compatibility and 73/23/EEC for electrical

equipment used within certain voltage limits and the Amendment Directive 93/

68/EEC. For the evaluation of the compliance with these Directives,the following

standards were applied:

RFI Emission:



Limit class A according to EN 55022



Limit class A for harmonic current emission according to EN 61000-3-



Limitation of voltage fluctuation and flicker in low-voltage supply

system according to EN 61000-3-3

Immunity:



Product family standard according to EN 55024



Electrostatic Discharge according to EN 61000-4-2



Radio-frequency electromagnetic field according to EN 61000-4-3



Electrical fast transient/burst according to EN 61000-4-4



Surge immunity test according to EN 61000-4-5



Immunity to conducted disturbances, Induced by radio-frequency

fields: EN 61000-4-6



Power frequency magnetic field immunity test according to EN 61000-

4-8



Voltage dips, short interruptions and voltage variations immunity test

according to EN 61000-4-11

LVD:



EN 60950-1:2001

– 6 –

OMPLIANCES

AND

AFETY

TATEMENTS

SAFETY COMPLIANCE

Warning: Fiber Optic Port Safety

CLASS I

LASER DEVICE

When using a fiber optic port, never look at the transmit laser while it

is powered on. Also, never look directly at the fiber TX port and fiber

cable ends when they are powered on.

Avertissment: Ports pour fibres optiques - sécurité sur le plan optique

DISPOSITIF LASER

DE CLASSE I

Ne regardez jamais le laser tant qu'il est sous tension. Ne regardez

jamais directement le port TX (Transmission) à fibres optiques et les

embouts de câbles à fibres optiques tant qu'ils sont sous tension.

Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit

LASERGERÄT

DER

KLASSE

Niemals ein Übertragungslaser betrachten, während dieses

eingeschaltet ist. Niemals direkt auf den Faser-TX-Anschluß und auf

die Faserkabelenden schauen, während diese eingeschaltet sind.

PSE ALARM .3+*051! 

.3+-2.51! .

3+%,3+#$24'2

(/3+.&*051! 

)2$3+51! '2"





– 7 –

OMPLIANCES

AND SAFETY

TATEMENTS

POWER CORD SAFETY

Please read the following safety information carefully before installing

the switch:

WARNING: Installation and removal of the unit must be carried out by qualified

personnel only.



The unit must be connected to an earthed (grounded) outlet to comply with

international safety standards.



Do not connect the unit to an A.C. outlet (power supply) without an earth

(ground) connection.



The appliance coupler (the connector to the unit and not the wall plug) must

have a configuration for mating with an EN 60320/IEC 320 appliance inlet.



The socket outlet must be near to the unit and easily accessible. You can

only remove power from the unit by disconnecting the power cord from the

outlet.



This unit operates under SELV (Safety Extra Low Voltage) conditions

according to IEC 60950. The conditions

are

only

maintained if the

equipment to which it is connected also operates under SELV conditions.

France and Peru only

This unit cannot be powered from IT† supplies. If your supplies are of IT

type, this unit must be powered by 230 V (2P+T) via an isolation transformer

ratio

1:1, with the secondary connection point labelled Neutral, connected directly to

earth (ground).

† Impédance à la terre

MPORTANT

Before making connections, make sure you have the correct cord

set. Check it (read the label on the cable) against the following:

– 8 –

OMPLIANCES

AND

AFETY

TATEMENTS

Power Cord Set

U.S.A. and Canada The cord set must be UL-approved and CSA certified.

The minimum specifications for the flexible cord are:

- No. 18 AWG - not longer than 2 meters, or 16 AWG.

- Type SV or SJ

- 3-conductor

The cord set must have a rated current capacity of at least 10 A

The attachment plug must be an earth-grounding type with NEMA

5-15P (15 A, 125 V) configuration.

Denmark The supply plug must comply with Section 107-2-D1, Standard

DK2-1a or DK2-5a.

Switzerland The supply plug must comply with SEV/ASE 1011.

U.K. The supply plug must comply with BS1363 (3-pin 13 A) and be fitted

with a 5 A fuse which complies with BS1362.

The mains cord must be <HAR> or <BASEC> marked and be of type

HO3VVF3GO.75 (minimum).

Europe The supply plug must comply with CEE7/7 (“SCHUKO”).

The mains cord must be <HAR> or <BASEC> marked and be of type

HO3VVF3GO.75 (minimum).

IEC-320 receptacle.

Veuillez lire à fond l'information de la sécurité suivante avant d'installer

le Switch:

AVERTISSEMENT: L’installation et la dépose de ce

groupe

doivent

être confiés à

un personnel qualifié.



Ne branchez pas votre appareil sur une prise secteur (alimentation

électrique) lorsqu'il n'y a pas de connexion de mise à la terre (mise à la

masse).



Vous devez raccorder ce groupe à une sortie mise à la terre (mise à la

masse) afin de respecter les normes internationales de sécurité.



Le coupleur d’appareil (le connecteur du groupe et non

pas

prise murale)

doit respecter une configuration qui permet un branchement sur une entrée

d’appareil EN 60320/IEC 320.

– 9 –

OMPLIANCES

AND SAFETY

TATEMENTS



La prise secteur doit se trouver à proximité de l’appareil et son accès doit

être facile. Vous ne pouvez mettre l’appareil hors circuit qu’en débranchant

son cordon électrique au niveau de cette prise.



L’appareil fonctionne à une tension extrêmement basse de sécurité qui est

conforme à la norme IEC 60950. Ces conditions ne sont maintenues que si

l’équipement auquel il est raccordé fonctionne dans les mêmes conditions.

France et Pérou uniquement:

Ce groupe ne peut pas être alimenté par un dispositif à impédance à la terre. Si

vos alimentations sont du type impédance à la terre, ce groupe doit être

alimenté par une tension de 230 V (2 P+T) par le biais d’un transformateur

d’isolement à rapport 1:1, avec un point secondaire de connexion portant

l’appellation Neutre et avec raccordement direct à la terre (masse).

Cordon électrique - Il doit être agréé dans le pays d’utilisation

Etats-Unis et Canada: Le cordondoit avoir reçu l’homologation des UL et un certificatde

la CSA.

Les spécifications minimales pour un cable flexible sont AWG No.

18, ouAWG No. 16 pour un cable de longueur inférieure

mètres.

- type SV ou SJ

- 3 conducteurs

Le cordon doit être en mesure d’acheminer un courant nominal

d’au moins 10 A.

La prise femelle de branchement doit être du type à mise à la

terre (mise à la masse) et respecter la configuration NEMA 5-15P

(15 A, 125 V).

Danemark: La prise mâle d’alimentationdoit respecter la section 107-2 D1 de

la norme DK2 1a ou DK2 5a.

Suisse: La prise mâle d’alimentation doit respecter la norme SEV/ASE

1011.

Europe La prise secteur doit être conforme aux normes CEE 7/7

(“SCHUKO”)

LE cordon secteur doit porter la mention <HAR> ou <BASEC> et

doit être de type HO3VVF3GO.75 (minimum).

– 10 –

Other manuals for LGB6026A

This manual suits for next models

Table of contents

Other Black Box Switch manuals

Black Box

Black Box LB8405A-R3-US User manual

Black Box

Black Box DCX3000 User manual

Black Box

Black Box KV9304A User manual

Black Box

Black Box MT760A-232/232 User manual

Black Box

Black Box PFBS120 User manual

Black Box

Black Box LGT616A-JP User manual

Black Box

Black Box SCSI Switch II User manual

Black Box

Black Box ACX576 User manual

Black Box

Black Box KVS4-1002V User manual

Black Box

Black Box KV9502A User manual

Black Box

Black Box LB9006A-SC User manual

Black Box

Black Box ServSwitch II ACS250A User manual

Black Box

Black Box EMS1G-48 Manual

Black Box

Black Box LGB1005A-R2 User manual

Black Box

Black Box LGB708A-R2 User manual

Black Box

Black Box ServSwitch Plus Series User manual

Black Box

Black Box IC147A-R3 User manual

Black Box

Black Box LPH1004A User manual

Black Box

Black Box LB9007A-SC-R User manual

Black Box

Black Box ServSwitch DT Series User manual

Black Box

Black Box LH8000A-M User manual

Black Box

Black Box ME500A User manual

Black Box

Black Box SW540A-R3 User manual

Black Box

Black Box Remote Management Switch SW555A User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual