Black Box LBH100A-SC User manual

1000 PARK DRIVE • LAWRENCE, PA 15055-1018 • 724-746-5500 • FAX 724-746-0746

Media Converter Switches

September 2004

LBH100A, AE

LBH100A, AE-H

LBH100A, AE-P

LBH110A, AE

LBH110A, AE-H

LBH110A, AE-P

CUSTOMER

SUPPORT

INFORMATION

Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX

FREE tech. support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

100Mbps 10 Mbps

BLACK BOX

Media Converter Switches Installation and User Guide

BLACK BOX

Series

Media Converter Switches

LBH100-series = 100Mb fiber + 2 10/100 copper ports

LBH110-series = 10 Mb fiber + 2 10/100 copper ports

Installation and User Guide

Trademarks

Ethernet is a trademark of Xerox Corporation

NEBS is a trademark of Telcordia Technologies

UL is a registered trademark of Underwriters Laboratories

Important: The LBH100 and LBH110 -series 10/100 Mb/s Media Converter

Switches contains no user serviceable parts. Attempted service by

unauthorized personnel shall render all warranties null and void. If problems

are experienced with LBH 100 and 110 10/100 Mb/s Converter Switch

products, consult Section 5, Troubleshooting, of this User Guide.

BLACK BOX

publication may be reproduced without prior written permission from Black Box, Inc.

Printed in the United States of America.

BLACK BOX

Media Converter Switches Installation and User Guide

Contacting Black Box Corporation

Please use these mailing address and phone and fax numbers:

Black Box Corporation

1000 Park Drive

Pittsburgh, PA 15055

Phone: (724) 746-5500

Fax: (724) 746-0746

E-mail: [email protected]

__________________________________________________________

BLACK BOX

Media Converter Switches Installation and User Guide

iii

FEDERAL COMMUNICATIONS COMMISSION

AND

CANADIAN DEPARTMENT OF COMMUNICATIONS

RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio frequency energy and if not

installed and used properly, that is, in strict accordance with the manufacturer’s

instructions, may cause interference to radio communication. It has been tested and

found to comply with the limits for a Class A computing device in accordance with the

specifications in Subpart B of Part 15 of FCC rules, which are designed to provide

reasonable protection against such interference when the equipment is operated in a

commercial environment. Operation of this equipment in a residential area is likely to

cause interference, in which case the user at his own expense will be required to take

whatever measures may be necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

BLACK BOX

Media Converter Switches Installation and User Guide

This digital apparatus does not exceed the Class A limits for radio noise emission from

digital apparatus set out in the Radio Interference Regulation of the Canadian

Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le

brouillage radioélectrique publié par le ministère des Communications du Canada.

NORMAS OFICIALES MEXICANAS (NOM)

ELECTRICAL SAFETY STATEMENT

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato

eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberan ser guardadas para referencia futura.

Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser

respetadas.

Todas las instrucciones de operación y uso deben ser seguidas.

BLACK BOX

Media Converter Switches Installation and User Guide

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño,

lavabo, sótano mojado o cerca de una alberca, etc..

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean

reconnendados por el fabricante.

El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recommendado por el

fabricante.

Servicio—El usuario no debe intentar dar sercicio al equipo eléctrico más allá a lo descrito en

las instrucciones de operatión. Todo otro servicio deberá ser referido a personal de servicio

calificado.

El aparato eléctrico debe ser situado de tal mannera que su posición no interfiera su uso. La

colocación del aparato eléctrico sobre una cama, sofá, alfombra o superficie similar puede

bloquea la ventilación, no se debe colocar en libreros o gabinetes que impidan el flujo de aire

por los orificios de ventilación.

10.

El equipo eléctrico deber ser situado fuera del alcance du fuentes de calor como radiadores,

registros de calor, estufas u otros aparatos (incluyendo amplificadores) que producen calor.

11.

El aparato eléctrico deberá ser connectado una fuente de poder sólo del tipo descrito en el

instrucivo de operación, o como se indique en el aparato.

BLACK BOX

Media Converter Switches Installation and User Guide

12.

Precaución debe ser tomada de mal manera que la tierra fisica y la polarización del equipo no

sea eliminada.

13.

Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni

pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los

contactos y receptáculos donde salen del aparato.

14.

El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recommendaciones del

fabricante.

15.

En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.

16.

El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo

periodo de tiempo.

17.

Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la

cubierta u orificios de ventilación.

18.

Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su desempeño;;o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

BLACK BOX

Media Converter Switches Installation and User Guide

vii

Certification Notice for

Equipment Used in Canada

The Canadian Department of Communications label identifies certified equipment. This

certification means that the equipment meets certain telecommunications-network

protective, operation, and safety requirements. The Department does not guarantee the

equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to be

connected to the facilities of the local telecommunications company. The equipment

must also be installed using an acceptable method of connection. In some cases, the

company’s inside wiring associated with a single-line individual service may be extended

by means of a certified connector assembly (extension cord). The customer should be

aware that compliance with the above conditions may not prevent degradation of service

in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance

facility—in this case, your supplier. Any repairs or alterations made by the user to this

BLACK BOX

Media Converter Switches Installation and User Guide

viii

equipment, or equipment malfunctions, may give the telecommunications company cause

to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the

power utility, telephone lines, and internal metallic water pipe system, if present, are

connected together. This precaution may be particularly important in rural areas.

CAUTION:

Users should not attempt to make such

connections themselves, but should contact

the appropriate electric inspection authority,

or electrician, as appropriate.

The LOAD NUMBER (LN) assigned to each terminal device denotes the percentage of

the total load to be connected to a telephone loop which is used by the device, to prevent

overloading. The termination on a loop may consist of any combination of devices,

subject only to the requirement that the total of the load numbers of all the devices does

not exceed 100.

BLACK BOX

Media Converter Switches Installation and User Guide

TABLE OF CONTENTS Page

1.0

SPECIFICATIONS ............................................................................... 1

1.1

Technical Specifications..................................................................... 1

2.0

INTRODUCTION ............................................................................... 13

2.1

Inspecting the Package and the Product............................................. 13

2.2

Product Description ........................................................................... 14

2.3

Frame Buffering and Latency............................................................ 22

2.4

Features and Benefits......................................................................... 24

2.5

Applications for LBH100A and LBH110A Media Converter ......... 27

3.0

INSTALLATION................................................................................. 34

3.1

Locating the Converter Switch Unit .................................................. 34

3.2

LE1505-RACK for Rack Mounting of LBH100A and LBH110A.... 35

3.3

LH1505P-RACK for Rack Mounting Media Converter Switches .... 37

3.4

DIN-Rail mounting option................................................................. 39

3.5

Power Requirements, Supply Types for LBH100A and LBH110A.. 40

3.6 Powering the LBH-series (DC internal) power input............................ 42

3.7

LBH100H and P Series , DC-powered, Installation ......................... 44

Table of contents

Other Black Box Switch manuals

Black Box

Black Box SWI080A-R3 User manual

Black Box

Black Box SW488A User manual

Black Box

Black Box JPM816A-HD User manual

Black Box

Black Box KV6224DPH User manual

Black Box

Black Box ServSwitch Octet KV1701 User manual

Black Box

Black Box ServSwitch SW4007A-USB-PLUS User manual

Black Box

Black Box LGB710A User manual

Black Box

Black Box SW722A-R2 User manual

Black Box

Black Box S-COS/2 User manual

Black Box

Black Box SERVSWITCH KV3108SA-R4 User manual

Black Box

Black Box KV404A User manual

Black Box

Black Box LIE1014A User manual

Black Box

Black Box COS-2 User manual

Black Box

Black Box LPBG716A User manual

Black Box

Black Box SS4P-DVI-4X2-UCAC User manual

Black Box

Black Box LGB5028A User manual

Black Box

Black Box KV814A User manual

Black Box

Black Box SW847A User manual

Black Box

Black Box SWI069A User manual

Black Box

Black Box LB9801A User manual

Black Box

Black Box LE2690A User manual

Black Box

Black Box KV9622A User manual

Black Box

Black Box LGB5124A User manual

Black Box

Black Box KV9104A User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual