Black Box IC147A-R3 User manual

BL A C K B O X®

Connect four or seven standard (1.5-Mbps)

or high-speed (480-Mbps) USB devices to your

computer.

USB 2.0 High-Speed Hub

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax

724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,

PA 15055-1018 • Web site: www.blackbox.com • E-mail: [email protected]

Customer

Support

Information

IC147A- R3

IC148A

1. Specifications

Distance (Maximum): 15 ft. (4.5 m)

Speed: 1.5/12/480 Mbps

RoHS: Yes

Connectors: IC147A-R3: (4) USB Type A F, (1) USB mini Type B F;

IC148A: (7) USB Type A F, (1) USB mini Type B F

Power: From the USB interface or from external power supply;

From external power supply: Input: 120 VAC, 0.4 amps, 47–63 Hz;

Output: 5 VDC, 2 amps

Size: IC147A-R3: 0.5"H x 1.4"W x 3.3"D (1.3 x 3.6 x 8.4 cm);

IC148A: 0.6"H x 4.5"W x 2.4"D (1.5 x 11.4 x 6.1 cm)

Page 2 724-746-5500 | blackbox.com

USB 2.0 High-Speed Hub

2. Overview

2.1 Introduction

The USB 2.0 High-Speed Hub is USB 2.0 compliant and connects to a Universal

Serial Bus (USB) port on your desktop or notebook computer. This slim hub has 4

or 7 ports for connecting USB (high-speed 480 Mbps or standard 1.5 Mbps)

devices to your computer. With a maximum bandwidth of 480 Mbps, this slim

hub enables you to connect devices that consume a large amount of bandwidth,

such as an external storage device, printer, scanner, DVD or CD-RW drive or digital

camera, to your computer.

2.2 Features

• Complies with Universal Serial Bus Specification Version 2.0 (Data Rate

1.5/12/480 Mbps)

• Four or seven external USB Type A downstream ports

• Connects up to a maximum of 127 USB devices through cascading multiple

hubs

• Derives power from the USB interface or from provided power supply

• Enables one Transaction Translator per hub and supports four or seven

concurrent non-periodic transactions

• Supports plug-and-play and hot-swap functions

• Compatible with Windows® and Mac® OS

• Supports EHCI/UHCI/OHCI specification

• Per-port output voltage is +5 VDC. Output current is 500 mA

2.3 System Requirements

To use the hub, your computer must meet the following hardware requirements

and run on one of the operating systems listed in Section 2.4.

NOTE: The USB 2.0 High-Speed 4- and 7-Port Hubs are backward compatible, so

you can connect them to a computer with either a USB 1.1 or 2.0 interface.

When using the hub with a computer that has a version 1.1 USB interface,

all the devices attached to the hub will run at USB 1.1 speed (up to

12 Mbps).

2.4 Hardware Operating System

• 64 MB RAM or higher, depending on the operating system

• USB interface

Page 3

724-746-5500 | blackbox.com

USB 2.0 High-Speed Hub

• Windows 98 SE/Windows Me/Windows 2000/Windows XP/Windows Vista®/

Windows 7 and higher

• Mac OS 8.6 and higher

3. Installation

3.1 Connecting the Hub and Installing the Driver

To connect the hub to your computer and install the operating system’s default

driver, follow the steps listed below.

The hub comes with one high-speed Type A/mini USB cable so that you can

connect it to a host computer.

1. Power on the computer.

2. Plug the supplied cable’s USB Type A connector end into a USB port on your

computer.

3. Plug the cable’s USB mini USB connector end into the hub.

4. Your computer’s operating system automatically detects the new hardware and

begins installing the appropriate default driver. If the power LED does not come

on, attach the AC power adapter to the AC power jack on the hub and plug

the adapter into an electrical outlet.

5. Follow the on-screen instructions to complete the driver installation. You can

now connect USB devices to the hub or daisychain additional hubs.

3.2 Connecting Devices to the USB Hub

To connect a USB device, plug it into a USB port on the hub and follow any

additional instructions provided with the device. When connecting new devices

to the hub, consider the following guidelines.

• If your computer is running the Windows 98 operating system, a series

of screens appears, beginning with the “Add New Hardware Wizard,” to guide

you through the driver installation process.

• If your computer is running Windows 98 SE, Windows Me, Windows 2000,

Windows XP, Windows Vista, or Windows 7, the device driver may install

automatically.

• When connecting a new device to your hub, you must run the “Setup” or

“Install” program for that device.

• When connecting a device to the hub, to avoid possible damage, never force

the cable connector into the port on the hub if the cable connector does not

attach.

FREE, live, 24/7 Tech Support is just 30 seconds away.

724-746-5500 | blackbox.com

3.3 Device Not Working

• Make sure that the device is connected to the hub.

• Plug the device into a different port on the hub. If it still does not work, test the

device by connecting it directly to your computer.

• Check that you ran the “Setup” or “Install” program for the device.

• Make sure that the device appears in Device Manager. See Section 3.4.

• Disconnect all devices from the hub and reconnect them, one at a time. Check

that each device works before plugging in the next device.

3.4 Verifying Device is Installed in Windows Operating System

To check that the hub is installed properly, use Device Manager to locate the

Generic USB Hub on USB 2.0 Bus device. To access Device Manager for Windows

98/Me operating system, right-click “My Computer, Properties” and then click the

“Device Manager” tab. For Windows 2000/XP/7 and Windows Vista, right-click

“My Computer, Properties, Hardware tab,” then click the “Device Manager” tab.

To test that the hub is working properly, in the Device Manager window:

• Select the “Generic USB Hub” on USB 2.0 Bus device.

• Click the “Properties” button or icon, depending on the operating system.

• Verify that the message “This device is working properly” appears.

• To verify that the Hub is installed properly for Mac, locate the “Generic USB Hub

on USB 2.0 Bus device” by opening “Apple System Profiler” and clicking

“Devices and Volumes.”

IC147A-R3, rev. 1

Black Box® and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Double Diamond™ is a

trademark of BB Technologies, Inc.

Mac is a registered trademark of Apple Computer, Inc.

Windows and Windows Vista are registered trademarks of Microsoft Corporation.

Any other third-party trademarks appearing in this publication are acknowledged to be the property of their respective

owners.

This manual suits for next models

Table of contents

Other Black Box Switch manuals

Black Box

Black Box LBS216AE-R3 User manual

Black Box

Black Box KV1044A-R2 User manual

Black Box

Black Box LE2700A User manual

Black Box

Black Box KV62-CBL User manual

Black Box

Black Box SERVSWITCH PANTHER KV1116A User manual

Black Box

Black Box ICI207A User manual

Black Box

Black Box ACXC Series User manual

Black Box

Black Box ICI104A User manual

Black Box

Black Box INTEL EXPRESS 410T Specification sheet

Black Box

Black Box LPH240A-H User manual

Black Box

Black Box SW1042A-MM User manual

Black Box

Black Box KV9004A User manual

Black Box

Black Box AlertWerks SH124A User manual

Black Box

Black Box PSE508MA User manual

Black Box

Black Box ServSwitch RMK19WX 1 User manual

Black Box

Black Box KV5300 Series User manual

Black Box

Black Box LGB1048A User manual

Black Box

Black Box SERVSWITCH KV3108SA-R4 User manual

Black Box

Black Box LGB5510A Programming manual

Black Box

Black Box ServSwitch ACU5001A User manual

Black Box

Black Box SI1P-SH-DVI-UCAC User manual

Black Box

Black Box LBS005A User manual

Black Box

Black Box KVM2016A User manual

Black Box

Black Box ServSwitch Uno USB Quick start guide

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual