Black Box SI1P-SH-DVI-UCAC User manual
USER GUIDE
• SI1P-SH-DVI-UCAC 2-Port Secure DVI-I KVM Switch with Audio and CAC Support
• SS2P-SH-DVI-U 2-Port Secure DVI-I KVM Switch with Audio
• SS2P-DH-DVI-U 2-Port Secure Dual-Head DVI-I KVM Switch with Audio
• SS2P-SH-DVI-UCAC 2-Port Secure DVI-I KVM Switch with Audio and CAC Support
• SS2P-DH-DVI-UCAC 2-Port Secure Dual-Head DVI-I KVM Switch with Audio and CAC Support
• SS4P-SH-DVI-U 4-Port Secure DVI-I KVM Switch with Audio
• SS4P-DH-DVI-U 4-Port Secure Dual-Head DVI-I KVM Switch with Audio
• SS4P-SH-DVI-UCAC 4-Port Secure DVI-I KVM Switch with Audio and CAC Support
• SS4P-DH-DVI-UCAC 4-Port Secure Dual-Head DVI-I KVM Switch with Audio and CAC Support
• SS4P-QH-DVI-UCAC 4-Port Secure Quad-Head DVI-I KVM Switch with Audio and CAC Support
CONSOLE
12VDC2.0A Audio
K/M
Audio
K/M
Audio
K/M
IN-4 IN-3
Audio
K/M
Audio
K/MCAC CAC CAC CAC
IN-1
IN-2
CAC
4 PORT DVI-I W/ AUDIO AND CAC
SECURE KVM SWITCH
SS4P-SH-DVI-UCAC
DVI-I OUT DVI-I DVI-I DVI-I DVI-I
MS KB
1 2 3 4
1
MODELS:
ADVANCED
1/2/4-PORT DVI-I
SECURE KVM SWITCH
USM-2S0-MM1 REV: 1.1A DATE: 07/03/2018
2
USER GUIDE
TABLE OF CONTENTS
TECHNICAL SPECIFICATIONS
WHAT’S IN THE BOX?
SECURITY FEATURES
SECURE KVM SWITCH FRONT AND REAR
INSTALLATION
CAC INSTALLATION: COMMON ACCESS CARD, SMART CARD READER
CAC PORT CONFIGURATION
AUDITING: Dumping the Event Log via User Menu Options
RESET: Restore Factory Default
LED’s BEHAVIOR
SYSTEM OPERATION
TROUBLESHOOTING
TECHNICAL SUPPORT
LIMITED WARRANTY STATEMENT
3
4
4
4
5
11
11
12
12
13
14
14
14
15
USER GUIDE
3
TECHNICAL SPECIFICATIONS
VIDEO
Format DVI-I Dual Link
Host Interface
SI1P-SH-DVI-UCAC (1) DVI-I 29-pin (female)
SS2P-SH-DVI-U/SS2P-SH-DVI-UCAC (2) DVI-I 29-pin (female)
SS2P-DH-DVI-U/SS2P-DH-DVI-UCAC/
SS4P-SH-DVI-U/SS4P-SH-DVI-UCAC (4) DVI-I 29-pin (female)
SS4P-DH-DVI-U/SS4P-DH-DVI-UCAC (8) DVI-I 29-pin (female)
SS4P-QH-DVI-UCAC (16) DVI-I 29-pin (female)
User Console Interface
SI1P-SH-DVI-UCAC/SS2P-SH-DVI-U/
SS2P-SH-DVI-UCAC/SS4P-SH-DVI-U/
SS4P-SH-DVI-UCAC
(1) DVI-I 29-pin (female)
SS2P-DH-DVI-U/SS2P-DH-DVI-UCAC/
SS4P-DH-DVI-U/SS4P-DH-DVI-UCAC (2) DVI-I 29-pin (female)
SS4P-QH-DVI-UCAC (4) DVI-I 29-pin (female)
Max Resolution 2560 x 1600 @ 60Hz; 3840x2160 @ 30Hz (w/HDMI-to-DVI adapter)
DDC 5 volts p-p (TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft.
Output Cable Length Up to 20 ft.
USB
Signal Type USB 1.1 and 1.0 Keyboard and Mouse only. USB 2.0 for CAC connection (Only in models with CAC)
Type B
SI1P-SH-DVI-UCAC/SS2P-SH-DVI-U/SS2P-DH-DVI-U: (2) USB Type B
SS2P-SH-DVI-UCAC/SS2P-DH-DVI-UCAC/SS4P-DH-DVI-U/SS4P-DH-DVI-U: (4) USB Type B
SS4P-SH-DVI-UCAC/SS4P-DH-DVI-UCAC/ SS4P-QH-DVI-UCAC: (8) USB Type B
User Console Interface
(2) USB Type-A for keyboard and mouse connection only
(1) USB Type-A for CAC connection (only in models with CAC)
AUDIO
Input (1)/(2)/(4) Connector Stereo 3.5mm Female
Output (1) Connector Stereo 3.5mm Female
PS/2
Connector (2) 6-pin Mini-DIN female K/M
POWER
Power Requirements 12V DC, 3A (minimum) power adapter with center-pin positive polarity.
ENVIRONMENT
Operating Temp 32° to 104° F (0° to 40° C)
Storage Temp -4° to 140° F (-20° to 60° C)
Humidity 0-80% RH, non-condensing
CERTIFICATIONS
Security Accreditation Common Criteria Validated To NIAP, Protection Prole PSS Ver. 3.0
OTHER
Emulation Keyboard, Mouse and Video
Control Front Panel Buttons
4
USER GUIDE
CONSOLE
12VDC2.0A Audio
K/M
Audio
K/M
Audio
K/M
IN-4 IN-3
Audio
K/M
Audio
K/MCAC CAC CAC CAC
IN-1
IN-2
CAC
4 PORT DVI-I W/ AUDIO AND CAC
SECURE KVM SWITCHSS4P-SH-DVI-UCAC
DVI-I OUT DVI-I DVI-I DVI-I DVI-I
MS KB
1 2 3 4
CONSOLE
12VDC2.0A Audio
K/M
Audio
K/M
Audio
K/M
IN-4 IN-3
Audio
K/M
Audio
K/MCAC CAC CAC CAC
IN-1
IN-2
CAC
4 PORT DVI-I W/ AUDIO AND CAC
SECURE KVM SWITCH
SS4P-SH-DVI-UCAC
DVI-I OUT DVI-I DVI-I DVI-I DVI-I
MS KB
1 2 3 4
Port Selection LEDs
Port Selection Push Buttons CAC Backlight LEDs
WHAT’S IN THE BOX?
SECURITY FEATURES
ANTI-TAMPER SWITCHES
Each model is equipped with internal Anti-Tamper switches, which sense attempts to open the device enclosure. Once the
system identies such an attempt, all the front panel LED’s will flash rapidly and the unit will become useless by shutting off
connection with all attached PCs and peripherals disabling any functionality.
TAMPER-EVIDENT SEAL
The enclosure of the unit is protected with a tamper-evident seal to provide a visual evidence if the unit has been opened.
PROTECTED FIRMWARE
The controller of the unit has a special protection feature that prevents reprogramming or reading the rmware.
HIGH ISOLATION ON USB CHANNELS
Opto-isolators are used in the unit to keep USB data paths electrically isolated from each other, providing high isolation and
preventing data leakage between ports.
SECURE EDID EMULATION
The unit prevents unwanted and unsecure data to be transmitted through the DDC lines by means of secure EDID learning
and emulation.
Secure DVI-I KVM Switch Unit 1/2/4-port Secure DVI-I KVM Switch
BX-1203000 Desktop power supply 100-240V, 12VDC 3A
User Manual
Figure 4-1: SS4P-SH-DVI-UCAC Front panel
Figure 4-2: SS4P-SH-DVI-UCAC Rear panel
USER GUIDE
5
INSTALLATION
SYSTEM REQUIREMENTS
1. Black Box Secure PSS is compatible with standard personal/portable computers, servers or thin-clients, running
operating systems such as Windows or Linux.
2. The peripheral devices that are supported by the Secure KVM Switch are listed in the following table:
*TOE - Models with CAC only Table 5-1
Console Port Authorized Devices
Keyboard
Wired keyboard and keypad without internal USB hub or composite device functions,
unless the connected device has at least one endpoint which is a keyboard or mouse HID
class, KVM/KM extender.
Audio out Analog amplied speakers, Analog headphones, Digital audio appliance.
Mouse / Pointing Device Any wired mouse or trackball without internal USB hub or composite device functions,
Touch-screen, Multi-touch or digitizer, KVM/KM extender.
User Authentication Device Smart-card reader, PIV/CAC reader, Token or Biometric reader*
6
USER GUIDE
INSTALLATION
Single-Head Units:
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use a DVI cable to connect the DVI output port from each computer to the corresponding DVII IN ports of the unit.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit.
4. Optionally connect a stereo audio cable (3.5mm to 3.5mm) to connect the audio output of the computers to the
AUDIO IN ports of the unit.
5. Connect a monitor to the DVI-I OUT console port of the unit using a DVI cable.
6. Connect a USB keyboard and mouse in the two USB console ports.
7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8. Optionally connect CAC (COMMON ACCESS CARD, SMART CARD READER) to the CAC port in the user console
interface. For models with CAC.
9. Finally, power on the Secure KVM Switch by connecting a 12VDC power supply to the power connector, and then
turn on all the computers.
Note: The computer connected to port 1 will always be selected by default after power up.
Note: You can connect up to 2 computers to the 2 port Secure KVM Switch and up to 4 computers to the 4 port
Secure KVM Switch.
USB IN
USB OUT
AUDIO IN
DVI-I OUT
CAC IN
CAC OUT
DVI-I IN
AUDIO OUT
SS4P-SH-DVI-UCAC
1 2 3 4
4 PORT DVI-I W/ AUDIO AND CAC
SECURE KVM SWITCH
SS4P-SH-DVI-UCAC
IMPORTANT WARNINGS - FOR SECURITY REASONS:
• This product does not support wireless devices. Do not attempt to use a wireless keyboard or a wireless mouse with
this product.
• This product does not support keyboards with integrated USB hubs or USB ports. Only use standard (HID) USB
keyboards with this device.
• This product does not support microphone audio input or line input. Do not connect any microphones or headsets
with microphones to this device.
• Connection of authentication devices (CAC) with external power sources is prohibited.
Figure 6-1: SS4P-SH-DVI-UCAC
USER GUIDE
7
INSTALLATION (Continued)
Multi-Head Units:
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use DVI cables to connect the DVI output ports of each computer to the corresponding DVI-I IN ports of the unit.
For example, if using SS4P-QH-DVI-UCAC the four DVI ports of one computer must all be connected to one channel.
The DVI-I IN connectors that belong to the same channel are arranged vertically.
3. Use a USB cable (Type-A to Type-B) to connect a USB port on each computer to the respective USB ports of the unit.
4. Optionally connect a stereo audio cable (3.5mm on both ends) to connect the audio output of the computer to the
AUDIO IN ports of the unit.
5. Connect the monitors to the DVI-I OUT console ports of the unit using DVI cables.
The DVI-I IN ports on one row will be switched to the DVI-I OUT of the same row.
6. Connect a USB keyboard and mouse in the two USB console ports.
7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8. Optionally connect CAC (smart card reader) to the CAC port in the user console interface.
9. Power on the Secure KVM Switch by connecting a 12VDC power supply to the power connector, and then turn on all
the computers.
Note: VGA-to-DVI adapter must be used if video input sources are analog. Also, if the monitors connected to the outputs
are dual-link DVI monitors, then DVI-I cables must be used from each computer.
Note: The computer connected to port 1 will always be selected by default after power up.
Figure 7-2: SS4P-QH-DVI-UCAC
Figure 7-1: SS4P-QH-DVI-UCAC
CONSOLE
K/M
Audio
CAC
12VDC3.0A
DVI OUT DVI
IN-4
Audio
K/M CAC
DVI
IN-3
Audio
K/M CAC
DVI
IN-2
Audio
K/M CAC
DVI
IN-1
DVI OUT DVI DVI DVI DVI
DVI OUT DVI DVI DVI DVI
DVI OUT DVI DVI DVI DVI
Audio
K/M CAC
SDVN-4Q-P
PC Workstation
CONSOLE
K/M
Audio
CAC
12VDC3.0A
DVI OUT DVI
IN-4
Audio
K/M CAC
DVI
IN-3
Audio
K/M CAC
DVI
IN-2
Audio
K/M CAC
DVI
IN-1
DVI OUT DVI DVI DVI DVI
DVI OUT DVI DVI DVI DVI
DVI OUT DVI DVI DVI DVI
Audio
K/M CAC
SDVN-4Q-P
8
USER GUIDE
INSTALLATION (Continued)
SS4P-QH-DVI-UCAC
USB IN
USB OUT
AUDIO IN
DVI-I OUT
CAC IN
CAC OUT
DVI-I IN
AUDIO OUT
4 PORT DVI-I W/ AUDIOAND CAC
SECURE KVM SWITCH
SS4P-QH-DVI-UCAC
1 2 3 4
Figure 8-1: SS4P-QH-DVI-UCAC
Figure 8-2: SS2P-SH-DVI-UCAC
SS2P-SH-DVI-UCAC
USB IN
USB OUT
AUDIO IN
DVI-I OUT
CAC IN
CAC OUT
DVI-I IN
AUDIO OUT
1 2
2 PORT DVI-I W/ AUDIO AND CAC
SECURE KVM SWITCHSS2P-SH-DVI-UCAC
USER GUIDE
9
INSTALLATION (Continued)
EDID Learn:
The Secure KVM Switch is designed to learn the connected monitor’s EDID upon power up. In the event of connecting a new monitor
to the Secure KVM Switch, a power recycle is required.
The Secure KVM Switch will indicate to the user the EDID learn process by flashing the front panel’s LEDs. Port one green and push
button blue LEDs will both begin to flash for about 10 seconds. When the LEDs stop flashing, the EDID learn process is done.
If the Secure KVM Switch has more than one video board (such as dual-head and quad-head models), then the unit will continue to
learn the EDIDs of the connected monitors and indicate the progress of the process by flashing the next port selection green and
push button blue LEDs respectively.
The monitor must be connected to the video output connector located in the console space at the back of the Secure KVM Switch
during the EDID learn process.
If the read EDID from the connected monitor is identical to the current stored EDID in the Secure KVM Switch then the EDID learn
function will be skipped.
10
USER GUIDE
SINGLE-HEAD MODE SECURE KM SWITCHING
In addition to traditional channel switching by buttons located on the front panel, Secure KM Switch also supports cursor
control of selected channels. This technology allows seamless switching between computers by moving the mouse
cursor from one display to another. Users can effortlessly switch computers for faster productivity.
1. KM functionality for KVM devices is only available once the device has been put into KM mode,
refer to admin tool guide for detail.
2. When the device is placed into KM mode, it will behave identically to the KM models of the product.
3. The major difference when the device is placed into KM mode is that cursor control of selected channels is available
as an additional method to switch the connected computer.
4. Figure 10-1 below shows how this functionality works.
5. For more information about how to congure this functionality, refer to the KM guide.
Figure 10-1
Cursor
Auto-switch
from 4 to 1
Auto-switch
from 1 to 2
Auto-switch
from 2 to 3
Auto-switch
from 3 to 4
Monitor 4
Monitor 3Monitor 2
Monitor 1
MULTI-HEAD MODE SECURE KM SWITCHING
When using computers with multiple displays, cursor control of selected channels allows switching between computers through
the use of simple mouse clicks and gestures. No device driver is required. Simply press the scroll wheel twice and then move the
mouse in the direction of the channel you desire to switch to.
+
Click the Mouse Wheel Twice
Move the mouse to the
direction of the target
computer screen
Figure 10-2
Note: This feature only works in Multi-Head display mode.
This manual suits for next models
9
Table of contents
Other Black Box Switch manuals
Black Box
Black Box ServSelect II KV2016A Installation and maintenance instructions
Black Box
Black Box LB8508A User manual
Black Box
Black Box LGB6026A Programming manual
Black Box
Black Box AVSC-0401H User manual
Black Box
Black Box PSE508MA User manual
Black Box
Black Box KV9204A User manual
Black Box
Black Box MT720A-232T User manual
Black Box
Black Box SWI083A User manual
Black Box
Black Box IC254A-US User manual
Black Box
Black Box ServSwitch DTX5000 User manual
Black Box
Black Box KV9622A User manual
Black Box
Black Box ServSwitch 4site User manual
Black Box
Black Box LB8505A User manual
Black Box
Black Box KVM2016A User manual
Black Box
Black Box SERVSWITCH PANTHER KV1116A User manual
Black Box
Black Box LinkUp 5294 User manual
Black Box
Black Box LGB2118A User manual
Black Box
Black Box LGB1108A User manual
Black Box
Black Box LPB316A User manual
Black Box
Black Box ServSwitch ACU1006RA User manual
