Black Box LB9316A User manual

BLACK BOX®

Provides serial management in a value-priced,

yet capable switch.

Value Managed Switches

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax

724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,

PA 15055-1018 • Web site: www.blackbox.com • E-mail: info@blackbox.com

Customer

Support

Information

LB9316A

LB9316C-SC-2K

LB9316C-SC-20K

LB9324A

Page 2 724-746-5500 | blackbox.com LB9316A

FCC and IC RFI Statements

FEDERAL COMMUNICATIONS COMMISSION AND

INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS

This equipment generates, uses, and can radiate radio-frequency energy,

and if not installed and used properly, that is, in strict accordance with the

manufacturer’s instructions, may cause interference to radio communication.

It has been tested and found to comply with the limits for a Class A computing

device in accordance with the specifications in Subpart B of Part 15 of FCC rules,

which are designed to provide reasonable protection against such interference

when the equipment is operated in a commercial environment. Operation of

this equipment in a residential area is likely to cause interference, in which case

the user at his own expense will be required to take whatever measures may be

necessary to correct the interference.

Changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

This digital apparatus does not exceed the Class A limits for radio noise

emission from digital apparatus set out in the Radio Interference Regulation

of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de la classe A prescrites dans le

Règlement sur le brouillage radioélectrique publié par Industrie Canada.

Normas Oficiales Mexicanas (NOM)

Electrical Safety Statement

INSTRUCCIONES DE SEGURIDAD

1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el

aparato eléctrico sea operado.

2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia

futura.

3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de

operación deben ser respetadas.

Page 3

724-746-5500 | blackbox.com

LB9316A

NOM Statement

4. Todas las instrucciones de operación y uso deben ser seguidas.

5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo,

cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca,

etc.

6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales

que sean recomendados por el fabricante.

7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea

recomendado por el fabricante.

8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá

lo descrito en las instrucciones de operación. Todo otro servicio deberá ser

referido a personal de servicio calificado.

9. El aparato eléctrico debe ser situado de tal manera que su posición no

interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá,

alfombra o superficie similar puede bloquea la ventilación, no se debe

colocar en libreros o gabinetes que impidan el flujo de aire por los orificios

de ventilación.

10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor

como radiadores, registros de calor, estufas u otros aparatos (incluyendo

amplificadores) que producen calor.

11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del

tipo descrito en el instructivo de operación, o como se indique en el

aparato.

12. Precaución debe ser tomada de tal manera que la tierra fisica y la

polarización del equipo no sea eliminada.

13. Los cables de la fuente de poder deben ser guiados de tal manera que no

sean pisados ni pellizcados por objetos colocados sobre o contra ellos,

poniendo particular atención a los contactos y receptáculos donde salen

del aparato.

14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las

recomendaciones del fabricante.

15. En caso de existir, una antena externa deberá ser localizada lejos de las

lineas de energia.

Page 4 724-746-5500 | blackbox.com LB9316A

NOM Statement

16. El cable de corriente deberá ser desconectado del cuando el equipo no sea

usado por un largo periodo de tiempo.

17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean

derramados sobre la cubierta u orificios de ventilación.

18. Servicio por personal calificado deberá ser provisto cuando:

A: El cable de poder o el contacto ha sido dañado; u

B: Objectos han caído o líquido ha sido derramado dentro del aparato; o

C: El aparato ha sido expuesto a la lluvia; o

D: El aparato parece no operar normalmente o muestra un cambio en su

desempeño; o

E: El aparato ha sido tirado o su cubierta ha sido dañada.

Page 5

724-746-5500 | blackbox.com

LB9316A

Trademarks Used in this Manual

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc.

Hyperterminal is a registered trademark of of Hilgraeve, Inc.

Any other trademarks mentioned in this manual are acknowledged to be

the property of the trademark owners.

Page 6 724-746-5500 | blackbox.com LB9316A

Table of Contents

Chapter Page

1. Specifications ........................................................................................ 7

2. Overview ........................................................................................ 8

2.1 Introduction................................................................................... 8

2.2 Features ........................................................................................ 8

2.3 What’s Included............................................................................. 8

2.4 Hardware Description .................................................................... 8

2.4.1 Front Panel ...................................................................... 8

2.4.2 Back Panel ....................................................................... 9

3. Hardware Installation .............................................................................. 10

4. Software Configuration ...........................................................................11

5. Operation: Main Menu ........................................................................... 14

5.1 Status ...................................................................................... 14

5.2 Configuration .............................................................................. 14

5.3 Security ...................................................................................... 19

5.4 Diagnostics .................................................................................. 19

5.5 Load Factory Defaults .................................................................. 20

5.6 Save ...................................................................................... 20

Page 7

724-746-5500 | blackbox.com

LB9316A

Chapter 1: Specifications

1. Specifications

Buffer: LB9316A: 1.625 MB;

LB9324A: 1.25 MB

Temperature Tolerance: Operating: 32 to 131° F (0 to 55° C)

Humidity Tolerance: Operating: 10 to 90%, noncondensing

Filtering and Forwarding Rate: 10 Mbps: 14,880 pps;

100 Mbps: 148,800 pps

MAC Addresses: LB9316A: 4K;

LB9324A: 8 K

Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-T,

IEEE 802.3x flow control

Switching Method: Store-and-forward

CE Approval: Yes

RoHS: Yes

Connectors: LB9316A: (16) RJ-45, (1) Power;

LB9324A: (24) RJ-45, (1) Power

Indicators: LB9316A: (17) LEDs: (1) Power, (16) LINK/ACT;

LB9324A: (25) LEDs: (1) Power, (24) LINK/ACT

Power: Both models: 100–240 VAC, 50–60 Hz internal power supply;

LB9316A: 7.5 watts maximum;

LB9324A: 10 watts maximum

Size: 1.75" (1U) x 17.3" x 8.7"D (4.4 x 44 x 22 cm)

Page 8 724-746-5500 | blackbox.com LB9316A

Chapter 2: Overview

2. Overview

2.1 Introduction

Use this basic utility switch to connect up to 16 or 24 10-/100-Mbps Ethernet

devices. Manage the devices via a PC connected to the switch‘s console port.

2.2 Features

• Supports real-time status read/write operation

• Provides on-line link status

• Supports Auto MDI/MDI-X, so you don’t need crossover cables

• Supports trunk speeds up to 800 Mbps

• Includes optional fiber optic module slot for 100BASE-FX applications

2.3 What’s Included

Your package should contain the following items. If anything is missing

or damaged, contact Black Box Technical Support at 724-746-5500

or info@blackbox.com.

• (1) Value Managed Switch with DB9 connector on front panel

• (2) Optional Fiber Modules (multimode: part number LB9316C-SC-2K,

single-mode: part number LB9316C-SC-20K)

• This user’s manual

2.4 Hardware Description

2.4.1 Front Panel

Figure 2-1 shows the front panel of the switch. Table 2-1 describes its

components.

1 2 3 4 5

Figure 2-1. Front panel.

Page 9

724-746-5500 | blackbox.com

LB9316A

Chapter 2: Overview

Table 2-1. Front panel components.

Number Component Description

1 DB9 connector Console port connects to PC for management.

2 Power LED Lights when power to the unit is on.

3 LINK/ACT LEDs (16) on the LB9316A; (24) on the LB9324A;

indicates port activity

4 RJ-45 connectors (16) on the LB9316A; (24) on the LB9324A;

links to 10-/100-Mbps Ethernet devices

5 Optional module (1) 100BASE-FX module

slot (multimode: part number LB9316C-SC-2K,

single-mode: part number LB9316C-SC-20K)

2.4.2 Back Panel

Figure 2-2 shows the back panel of the switch. Table 2-2 describes its

components.

6 7

Figure 2-2. Back panel.

Table 2-2. Back panel components.

Number Component Description

6 Switch Press ON to power on the switch;

Press OFF to power off the switch

7 Power receptacle Accepts 100–240 VAC, 50–60 Hz power plug

Page 10 724-746-5500 | blackbox.com LB9316A

Chapter 3: Hardware Installation

3. Hardware Installation

1. Make sure your PC and the Value Managed Switch are powered off.

2. Connect the cable from the PC serial port to the DB9 connector on the switch.

See Figure 3-1.

Value Managed Switch

PC console

Figure 3-1. Attaching a PC to the switch’s console port.

NOTE: When you connect the cable from the PC serial port, remember which seri-

al port you connected.

This manual suits for next models

Table of contents

Other Black Box Network Router manuals

Black Box

Black Box LEH908A User manual

Black Box

Black Box VOE212 User manual

Black Box

Black Box LGH1006A User manual

Black Box

Black Box LB9215A User manual

Black Box

Black Box LPB5028A User manual

Black Box

Black Box LR1560A-ST-R2 User manual

Black Box

Black Box LB9017A-R3 User manual

Black Box

Black Box LGB2003A User manual

Black Box

Black Box Multiport Analog VoIP Gateway Router VOE231A User manual

Black Box

Black Box L2 Plus User manual

Black Box

Black Box LBS3041AE User manual

Black Box

Black Box Phone Line Manager 120B User manual

Black Box

Black Box LB611A User manual

Black Box

Black Box lgb2001a User manual

Black Box

Black Box LR120A User manual

Black Box

Black Box LGB2008A-R2 User manual

Black Box

Black Box LR1102A-T1/E1 User manual

Black Box

Black Box LR9601A User manual

Black Box

Black Box Nortel Secure 1001 User manual

Black Box

Black Box LGB1002A-R2 User manual

Black Box

Black Box WS100A User manual

Black Box

Black Box LB9007A-SC-R3 User manual

Black Box

Black Box LB9002A-SC-R3 User manual

Black Box

Black Box LT2060A User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview