BioLAB BSFLS-101 User manual

Operation Manual

Floor Standing Shaking Incubator

BSFLS-101

Thank you for Choosing Biolab products. Please read the “Operating Instructions” and

“Warranty” before operating this unit to assure proper operation.

Index

. Product Drawing............................................................................................................................3

2. Structure and Working Principle..............................................................................................4

3. Technical Parameter.......................................................................................................................4

4. Panel Instruction.............................................................................................................................5

5. Operation..........................................................................................................................................5

6. Temperature and its parameter setting.................................................................................6

7. Trouble Shooting.......................................................................................................................... 6

8. The Wiring Diagram..................................................................................................................... 7

9. After Sales Services...................................................................................................................... 8

www.biolabscientific.co

Floor Standing Shaking Incubator BSFLS-101

0 Product Drawing

Sectional view Front view Back view

. Oscillator

2. Driving wheel

3. Printer

4. USB Port

5. Controller

6. Power Switch

7. Observation window

8. Door Handle

9. Universal caster

0. Fan

. Heating Tube

2. Evaporator

www.biolabscientific.co 3

Floor Standing Shaking Incubator BSFLS-101

02 Structure and Working Principle

The shaking incubator is composed of a microcomputer temperature control system

with LCD Display, Stainless steel inner material, The Body is Composed of environmental

protection foam , transparent glass door, stainless steel oscillation car and rack, stainless steel

inner chamber and refrigeration system

Transparent glass door is good for insulation and observing the platelet preservation

condition.

stainless steel material is easy to clean and disinfect, oscillating frame divided lots of layers,

each layer can put numbers of platelet bags, frame grid can be taken out independently, easy

to operate, oscillation frame was working by a constant speed motor for horizontal shaking

The machine is equipped with multiple axial flow fans to keep temperature evenly in the box.

03 Technical Parameter

. Temperature range: RT+5-60°C

2. Shake frequency: 20-300 rpm

3. Amplitude: 26mm

4. Plate size: 500x350 mm

5. Working Mode: continuous

6. Voltage: 220V, 50/60Hz

7. Power: 720 W

8. Overall Size: 700x665x 350 mm

www.biolabscientific.co

Floor Standing Shaking Incubator BSFLS-101

04 Panel Instruction

05 Operation

. Controller is powered on, the temperature display window showing "HY - 2", speed

display window showing"8888", the time display window showing "8888", all identifiers

is lighting, the machine into the normal display status after 4 seconds.

2. Prohibit temperature and speed control function

Temperature value is less than the set temperature value, temperature display window

showing "OFF", said the ban on temperature control function. Speed value is less then

set speed value, speed display widow showing “OFF”,said the ban on speed control

function .

3. Timing function

When total timing set to "0", said there was no timing function, the controller run

continuously; When timing setting is not "0", after the time stop running (see the ndt

parameters: the internal parameter table 7), the time display shows "End", buzzer call

for minute. Click the run/stop "button, can restart the controller.

4. Start and Stop

Long press the "run/stop" key for second can start or stop the controller . Runtime

identifier light "RUN", "STOP" when to STOP identifier to light.

5. Refrigeration function

Compressor works can choose (intermittent type, balanced type and open type),

www.biolabscientific.co 5

Floor Standing Shaking Incubator BSFLS-101

intermittent work can choose manual or automatic start-stop compressor (see the

NDC, CP, Htd, Crc, Cnp parameters: the internal parameter table – 2).

6. Memory function when power off

By modifying off electrical parameter values (see the "rES" parameters: the internal

parameter table - 2) can choose whether to have memory function when power supply

drop.

7. Lighting and sterilization function (see the Lt, St parameters: the internal parameters of

table )

Note: click on lighting lighting function work; Sterilization function long press for 3

seconds sterilization work.

8. In the condition of setting if without any key pressed for minute, the controller will

automatically return to normal display state.

9. Over temperature alarm, "ALM identifier" light, buzzer, buzzer can press any key when

it sound.

0. When the controller (Er - ) power module fault occurring, locked-rotor (Er - 2), hall

error (Er - 3), busbar undervoltage (Er - 4), bus over-voltage (Er - 5), communication

failure (Er - 6), "ALM2 identifier to light," speed controller automatically stop running.

. If the temperature controller display window "-", said temperature sensor failures or the

controller itself, please carefully check the temperature sensor and its wiring.

06 Temperature and its parameter setting

．Click on the "temperature" button, enter the temperature setting state, flashing

temperature display area, can be modified by shift, increase and decrease key to the desired

set point; Then click on "temperature", exit temperature setting state, the value is

automatically saved.

2．Long press "temperature" button for 3 seconds temperature display area to show the

password prompt "Lc", speed display area shows the password value, enter the password

value into the temperature internal parameters setting state, then click on "temperature" can

modify the parameters. Long press "temperature" button for 3 seconds, exit this state, the

parameter value automatically saved.

www.biolabscientific.co

Floor Standing Shaking Incubator BSFLS-101

Intrinsic parameter-1

Parameter

code

Parameter

name Parameter function factory default

(range)

Lc Password “Lc=3”view and modify parameters 0

AL-

Over-

temperature

alarm margins

when “test temp. > set temp. +AL ”, alarm

light is on, alarm beeps, stop running,

heating output

(0~20.0 )℃

5.0

Ct- Compressor

delay start

Compressor startup time delay protection,

compressor minimum time interval from

stop to restart

(0~600s)

uP-

The

compressor

Start threshold

When compressor working in Continuous

way

If "temperature measured values ≥

temperature setting value + uP" and the

compressor start delay time is over, start the

compressor

Note: This parameter is only effective in

manual start-stop compressor mode, in the

automatic mode is invalid

(- 0.0~ 0.0 )℃

0.4

dn-

The

compressor

shut down

threshold

When compressor working in Continuous

way

If "temperature measured values ≤

temperature setting value + dn" and the

compressor is closed

Note: This parameter is only effective in

manual start-stop compressor mode, in the

automatic mode is invalid

(- 0.0~(uP-

0. ))

0.2

Lt- Lighting close

delay close

Open lamp, delay after Lt time automatically

shut down."Lt = 0", the time delay is invalid,

must manually close the lighting.

Lights, delay shut down automatically after

St time."St = 0", the time delay is invalid

must manually shut the sterilization lamp

(0~9999min)

St-

The

sterilization

lamp close

time delay

After sterilization lamp open, delay St time

shut down automatically."St = 0", the time

delay is invalid must manually shut the

sterilization lamp.

(0~9999min)

www.biolabscientific.co 7

Floor Standing Shaking Incubator BSFLS-101

T- Control cycle Heating Control cycle ( ~60s) 5

P- Proportional

band Time scale functional governing (0. ~50.0) 5.0

I- Integration

time Integration functional governing ( ~2000s) 380

d- Differential

time Differential functional governing (0~2000s) 00

Pb- Zero

adjustment

Correction (low temperature) generated

when the measuring error of the sensor.

Pb = actual temperature - meter

measurements

(-99.9~99.9 )℃

PK- Full

adjustment

Correction (high temperature) generated

when the measuring error of the sensor.

PK = 000 * (the actual temperature value -

instrument measurements)/instrument

measured values

(-999~999) 0

Intrinsic parameter-2

Parameter

code

Parameter

name Parameter function factory default

(range)

Lc password "Lc = 9 to view and modify the parameter

values. 0

rES

power supply

drop memory

function

0: no memory function when power supply

drop

: power lost memory function

(0~ )

FAn fun style

chose

0：The fan is short axial fan

：The fan is long axial fan

(0~ )

ndc compressor

working way

0: compressor only intermittent work;

: compressor according to the CP (see

below) the value of the compressor balance

type or intermittent work;

2: compressor according to Htd (see below)

judging the value of the compressor balance

type or intermittent work;

(0~2) 0

CP-

The

compressor

works fixed

switching

points

When "NDC = ",

If the temperature set point or CP ", the

compressor work in intermittent way,

whereas work in balanced way

(0~ 00.0 )℃

30.0

www.biolabscientific.co

Floor Standing Shaking Incubator BSFLS-101

Htd

The

compressor

works

automatically

switching

points

When "NDC = 2"

If the temperature set point ≥ ambient

temperature + Htd", compressor work in

continuous way, otherwise work in balanced

way.

(-50.0~50.0 )℃

0.0

Crc

The

compressor

Start and Stop

mode

When the compressor work in continuous

way,

0: automatic start-stop compressor

(according to the environmental temperature

and set point);

: manual start-stop compressor (according

to the internal parameters in table of the

uP and dn value);

(0~ ) 0

Cnp

Ban on

compressor

Working

temperature

point

Setting Value ≥Cn when temperature is "p",

prohibit the compressor work.

Note: this way is the highest priority, the

controller to perform this command first,

then to judge compressor balance or

intermittent work.

(0~ 00.0 )℃

42.0

nP- Maximum

power output

The percentage of maximum power heating

output (0~ 00%) 00

Co-

Shut off the

heating output

deviation

When the temperature measured values

≥setting value + Co, shut off the heating

output.

(0.0~20.0 )℃

5.0

SPL

Temperature

setting min

value

temperature setting min value data

50.0~ 00.0 )℃

0.0

SPH

temperature

setting max

value

temperature setting max value data (SPL~ 00.0 )℃

60.0

Adr address The machine factory produce address ( ~ 6)

www.biolabscientific.co 9

Floor Standing Shaking Incubator BSFLS-101

Intrinsic parameter-3

Parameter

code

Parameter

name Parameter function factory default

(range)

Lc password "Lc = 8" to view the environment

temperature.

Ht Environment

temperature

the environment temperature of The

controller

Intrinsic parameter-4

Parameter

code

Parameter

name Parameter function factory default

(range)

Lc- Password “Lc=27”to view or modify the parameter

value 0

CdS

apillary,

pressure

release

function

selection

0: relay for pressure relief function;

: relay for capillary function; (0~ ) 0

CAP

Capillary

switch Setting

value

When the temperature setting ≥ CAP ", start

relay;

When the temperature setting ＜ CAP ",

close the relay.

50.0~ 00.0 )℃

0.0

dpL

Pressure

release

(cooling)

solenoid valve

start valve

When the compressor work in balanced way,

If the temperature measurement ≤

temperature setting value + dpL ", start the

electromagnetic valve;

When the compressor to off work, if the

compressor stop working, the starting

electromagnetic valve.

(- 0.0~0.0 )℃

0.0

www.biolabscientific.co

Floor Standing Shaking Incubator BSFLS-101

Table of contents

Other BioLAB Laboratory Equipment manuals

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide