BioLAB BCBS-103 User manual

Operation Manual

Biological Safety Cabinet Class I

BCBS-103

Thank you very much for Choosing Biolab products. Please read the“Operating Instructions” and “Warranty”

before operating this unit to assure proper operation.

www.biolabscientific.com

Biological Safety Cabinet Class I BCBS-103

Index

1. Unplugging Installation and Debugging......................................................................................03

2. Using Instruction....................................................................................................................................07

3. Common Faults & Solution...............................................................................................................16

4. Warranty....................................................................................................................................................21

Biological Safety Cabinet Class I BCBS-103

www.biolabscientific.com 3

01Unpacking Installation and Debugging

Please rstly check if packing box is in good condition. If the packing box is damaged, please take

photos.

1.1 Unpacking

Choose the proper unpacking method according to the actual situation.

Method 1 Use M8 Wrench to unpack

Picture 1

www.biolabscientific.com

Biological Safety Cabinet Class I BCBS-103

Method 2 Necessary tools for unpacking: Electric drill with hexagon dead M8

Picture 2

Biological Safety Cabinet Class I BCBS-103

www.biolabscientific.com 5

Rapid unpacking diagram (Picture 3). Disassemble the screws shown in the below Picture, then move

the wooden pieces to right and left.

Picture 3

1.2 Accessories checking

Items Quantity Location

BCBS-103 Main Body 1 unit Wooden Case

Power cord 1 pc Packing bag

Fuse (5A) 1 pc Document pouch

UV Lamp (T6 20W) 1 pc Paper Packing

User manual 1 pc Document pouch

www.biolabscientific.com

Biological Safety Cabinet Class I BCBS-103

1.3 Installation conditions and using environment

The machine should be placed in a area of air ow protection. Front window operation opening

couldn’t be opposite the door and window. Machine should be located far away from ventilating

system and air-conditioning vents, in case of Biological safety cabinet aected by airow which come

from ventilating system, air-condition, door, window and people move.

Biological safety cabinet should not located in the place near door and walls around the corner.

Working environment:

(1) Only is suitable for indoor;

(2) Ambient temperature: 15°C~5°C;

(3) Relative Humidity: ≤75%;

(4) Atmospheric pressure range: 70 kPa~106 kPa, without strong air ow.

(5) Electrical parameters: Consistent with the rated voltage of the technical parameter. (See 2.1.4

technical parameter performance index);

(6) Power supply need to be grounded; (Judging method: testing the re wire and the zero line of the

power supply with multimeter, the re wire to ground voltage should be grid voltage and the zero

line to ground voltage should be 0, otherwise the power supply ground is bad);

1.4 Installation

a. Remove all the package materials;

b. Inspect the surface of main body to make sure whether there is scratch, deformation or uncorrelated

things;

c. Checking the accessories and documents based on packing list in User Manual;

d. Move the item to a place where is as close as possible to the nal location and easy to install.

Biological Safety Cabinet Class I BCBS-103

www.biolabscientific.com 7

1.5 Check after installation nished

Please check if the voltage displayed in nameplate is coincidence with the actual voltage. When the

machine power on, push ON button of the display and check the following items:

Items Normal Condition

Fan Running Normally

LED Lamp Light on when press the corresponding

button

UV Lamp Light on when press the corresponding

button

Display screen buttons All buttons can be used

Please contact your engineer to debug it if there are any problems. Debug method is displayed in

the After sale service manual.

02User Instruction

2.1 Functions

2.1.1 Product Concept

With the developing of medical technology, human’s cognition of microorganism protection keep

improving as well. Laboratory safety become more comprehensive and standard. Meanwhile, the

requirement of lab equipment come to a higher stage. Aerosol particle would be produced during

experimental operation in clinical laboratory of medical institution and research laboratory, such

as specimen pre-treatment of mixing, stir, grinding, communication, centrifugal and Pathogen

inoculating loops ring. When dirt in a high pressure heat up and exhausting, aerosol could be

produced. Biological biosafety cabinet Class I could protect personnel and environment from the

harm of aerosol pollution suciently.

Biological safety cabinet Class I is a kind of negative pressure ltration system, front opening which air

ow inward have protection function for operator. The polluted air ow become pure after processed

by HEPA lter. Biological safety cabinet Class I could be placed in any place and easy to operate,

meanwhile, it protecting operator and environment when experimental operation.

www.biolabscientific.com

Biological Safety Cabinet Class I BCBS-103

2.1.2 Working theory/Air ow pattern and protected area

Picture 4

2.1.3 Protected Objects

Biological safety cabinets Class I are designed to protect the operator, the laboratory environment

and work materials from exposure to infectious aerosols and splashes that may be generated when

manipulating materials containing infectious agents.

Biological Safety Cabinet Class I BCBS-103

www.biolabscientific.com 9

2.1.4 Technical Parameters

Model

Parameters BCBS-103

Power Supply AC 220V±10% 110V±10%

Frequency 50 Hz 60Hz

External

Size(W*D*H) 900*713*1250 mm

Working Zone

Size(W*D*H) 800*635*600 mm

Consumption ≤400 W

Average airow >0.3m/s

LED uorescent

lamp Consumption T5 8W

UV Lamp

Consumption 20Ws

HEAP Filter 99.985 (Diameter:0.3μm)

Noise ≤60 dB(A)

Notes: Our company reserve the right for changing the products, if we need to change and re-design.

1) Illuminance: Average illuminance ≥ 500lux

2) Electrical performance:

Withstand voltage: voltage values up to AC 1390V within 5s, keep not breakdown in 5s.

Ground resistance: ≤0.1Ω

3) Vibration Amplitude:

The vibration net amplitude of frequency between 10Hz and 10Khz no more than 10μm(rms).

www.biolabscientific.com

Biological Safety Cabinet Class I BCBS-103

2.2 Product Structure

2.2.1 Structural Composition

Picture 5

1. Ship type switch 2. Countertop 3. Side window 4. UV lamp 5. Chimney fan 6.

Ground terminal 7. Power socket 8. Front screen 9. Control panel 10. Fluorescent Lamp

2.2.2 Structure Introduction

1) Front glass door:

Front glass door is made of toughened glass, which have little damage to human when cracking.

Front window was controlled by motor, it could up and down by adjusting direction switch.

2) Air Filtration System

Air Filtration System is the most important system of this machine. It consists of blower, purify air

lter and air ue. Aerosol produced during experiment operation enter Biosafety cabinet Class I with

the air outside, then Filtration System will lter the dust particle or infectant and exhaust the puried

air to external environment. Air Filtration System use the HEPA lter, which make sure the cleanliness

of air outlet.

Note: Though Biological biosafety cabinet could protect operator and environment from harm, it

couldn’t make sure the samples used in experiment won’t be polluted by the air in lab. It couldn’t

foreclose the possibility of cross-infection.

Table of contents

Other BioLAB Laboratory Equipment manuals

Popular Laboratory Equipment manuals by other brands

Qiagen

Qiagen DML 3000 user manual

Queensgate

Queensgate NANOSCAN OP400 Quick start instructions

Conviron

Conviron GEN1000-GE Operator's manual

Parr Instrument

Parr Instrument 4560 Operating instructions manual

IKA

IKA IC control operating instructions

Integra

Integra DOSE IT operating instructions

Agilent Technologies

Agilent Technologies 5800 ICP-OES user guide

Endress+Hauser

Endress+Hauser Cleanfit CPA875 operating instructions

NI PXI-5422 CALIBRATION PROCEDURE

Collomix

Collomix Aqix operating instructions

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series operating manual

Ocean Insight

Ocean Insight FLAME-NIR+ Installation and operation manual

Parker

Parker ALIGN-MG-NA Installation, operation and maintenance manual

BD 644787 user guide

DENTAURUM

DENTAURUM Compact Megaplus Instructions for use

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 instruction manual

VWR

VWR SAS Super IAQ instruction manual

illumina

illumina MiSeqDx reference guide