Billion BiPAC 7402G User manual

BIPAC 7402G

802.11g ADSL VPN Firewall Router

Quick Start Guide

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Package Contents

BIPAC 7402G 802.11g ADSL VPN Firewall Router

CD-ROM containing the on-line manual

RJ-11 ADSL/telephone Cable

Ethernet (CAT-5 LAN) Cable

Console (PS2-RS232) Cable

AC-DC power adapter (12VDC, 1A)

External Antenna

This Quick Start Guide

For more detailed instructions on configuring and using

the 802.11g ADSL VPN Firewall Router, please refer to

the on-line manual.

9DO NOT use the BIPAC 7402G in high humidity or high

temperatures.

9DO NOT use the same power source for the BIPAC 7402G as

other equipment.

9DO NOT open or repair the case yourself. If the BIPAC

7402G is too hot, turn off the power immediately and have it

repaired at a qualified service center.

9Avoid using this product and all accessories outdoors.

Warning

9Place the BIPAC 7402G on a stable surface.

9Only use the power adapter that comes with the package.

Using a different voltage rating power adaptor may damage

the router.

ttention

Quick Start Guide

The Front LEDs

LED Meaning

PPP / MAIL

Lit steady when there is a PPPoA / PPPoE connection.

Lit and flashed periodically when there is email in the Inbox.

ADSL When lit, it indicates that the ADSL (Line) port is connected to the DSLAM and

working properly.

LAN Port

1X — 4X

(RJ-45

connector)

Lit when the LAN link is connected to an Ethernet device.

Green for 100Mbps; Orange for 10Mbps.

Blinking when data is Transmitted / Received.

WLAN

Lit green when the wireless connection is established.

Flashes when sending/receiving data.

SYS Lit when the system is ready.

PWR Lit when power is ON.

PPP/MAILADSLWLAN

SYS

PWR

LAN

1234

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

The Rear Ports

Port Meaning

1 Power Switch Power ON/OFF switch

2 PWR Connect the supplied power adapter to this jack.

3 RESET

After the device is powered on, press it to reset the device or

restore to factory default settings.

0-3 seconds: reset the device

6 seconds above: restore to factory default settings (this is used

when you can not login to the router, e.g. forgot the password)

4 LAN

1X — 4X

(RJ-45 connector)

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the

four LAN ports when connecting to a PC or an office/home

network of 10Mbps or 100Mbps.

5 CONSOLE Connect a PS2/RS-232 cable to this port when connecting to a

PC’s RS-232 port (9-pin serial port).

6 LINE Connect the supplied RJ-11 (“telephone”) cable to this port when

connecting to the ADSL/telephone network.

4 3

Quick Start Guide

Connecting Your ADSL Router

1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.

2. Power on the device.

3. Make sure the PWR, SYS, and WLAN LEDs are lit steadily and that the relevant LAN LED

is lit.

PPP/MAIL

ADSLWLAN

SYS

PWR 4

LAN

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Configuring PC in Windows XP

1. Go to Start / Control Panel (in Classic

View). In the Control Panel, double-click on

Network Connections

2. Double-click Local Area Connection.

3. In the Local Area Connection Status

window, click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows 2000

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

Dial-up Connections.

2. Double-click Local Area Connection.

3. In the Local Area Connection Status window

click Properties.

4. Select Internet Protocol (TCP/IP) and click

Properties.

5. Select the Obtain an IP address

automatically and the Obtain DNS server

address automatically radio buttons.

6. Click OK to finish the configuration.

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Configuring PC in Windows 98/Me

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Configuration tab.

2. Select TCP/IP ->

NE2000 Compatible, or the name of your

Network Interface Card (NIC) in your PC.

3. Select the Obtain an IP address

automatically radio button.

4. Then select the DNS Configuration tab.

5. Select the Disable DNS radio button and click

OK to finish the configuration.

Quick Start Guide

Configuring PC in Windows NT4.0

1. Go to Start / Settings / Control Panel. In the

Control Panel, double-click on Network and

choose the Protocols tab.

2. Select TCP/IP Protocol and click Properties.

3. Select the Obtain an IP address from a

DHCP server radio button and click OK.

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Configuring Your ADSL VPN Firewall Router

Connecting to the Router

1. Open the web browser and type

http://192.168.1.254 in the browser’s

address box. This number is the default IP

address for this router. Press Enter.

2. A user name and password window will

appear. The default User Name and

Password are “admin” and” admin”.

Press OK to logon to the router.

To configure this device, you must have IE 5.0

Netscape 4.5 or above installed

Quick Start Guide

Verifying Your Local Network Connection with the Device

To see if this ADSL Router is

visible on the local network, go

to Start / Run.In the Run dialog

box, type “ping 192.168.1.254”

then press OK.

A command prompt window will

pop out. If your ping is

successful which means your

local network is able to reach to

the device, then the command

prompt window will close up

automatically.

Connection fails, when you see

“Request timed out” in the

command prompt window. You

may need to check your set up.

Billion BIPAC 7402G 802.11g ADSL VPN Firewall Router

Product Support and Contact Information

Most problems can be solved by referring to the Troubleshooting section in the User’s

Manual.If you cannot resolve the problem with the Troubleshooting chapter, please contact

the dealer where you purchased this product.

Contact Billion

WORLDWIDE

http://www.billion.com

Mac OS is a registered Trademark of Apple Computer, Inc.

Windows 98, Windows NT, Windows 2000, Windows Me and Windows XP are registered Trademarks of Microsoft

Corporation.

Other manuals for BiPAC 7402G

Table of contents

Other Billion Network Router manuals

Billion

Billion (802.11g) ADSL2+ Modem/Router BIPAC 5102G User manual

Billion

Billion BiPAC 5200G R4 Series User manual

Billion

Billion BiPAC 8200N User manual

Billion

Billion BiPAC 7800GZ(L) User manual

Billion

Billion BIPAC-74x GE Series User manual

Billion

Billion BILLION BIPAC-7500GL User manual

Billion

Billion BiPAC 8500 User manual

Billion

Billion BIPAC- 8500 User manual

Billion

Billion Modem/Router ADSL BIPAC-7100 Guide

Billion

Billion BiPAC 7800NL User manual

Billion

Billion BiPAC 5400SW Installation and operation manual

Billion

Billion BiPAC 5200N RC User manual

Billion

Billion BiPAC 7560G User manual

Billion

Billion myGuard 7202 User manual

Billion

Billion BiPAC 5200S Series User manual

Billion

Billion ADSL Modem / Router BIPAC-710C2 Parts list manual

Billion

Billion M500 User manual

Billion

Billion 800VGT User manual

Billion

Billion BiPAC 6300NXL User manual

Billion

Billion BiPAC 7402R2 User manual

Billion

Billion BIPAC-7402 User manual

Billion

Billion BiPAC 7402X Series User manual

Billion

Billion BiPAC 8500/8520 User manual

Billion

Billion BiPAC 2070 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview

LevelOne

LevelOne FBR-1416 user manual