Beok Controls BOT-313 User manual

Remark:

(1) The defaulted temperature of period3 and period4 is the same as

period2. Please change it according to the request.

(2) When setting temperature is 00, this period is power off.

Period

Week

Weekend

Period Icon Defaulted Time Defaulted Temp.

6:00

8:00

11:30

12:30

17:30

22:00

8:00

23:00

20℃

15℃

22℃

15℃

Press M to switch operation between manual mode and programmable

mode.

Display Code Function Setting And Options Factory Defult

SVH High limit temp.

for internal sensor 5-99℃35℃

SVL Low limit temp.

for internal sensor 5-99℃5℃

ADJ Temp.calibration Check and calibrate the

actual room temp.

0.5℃accuracy

calibrate

FRE

Frost-protection

00：Close 00

PON Power memory 00：Off

01：On 00

FAC WIFI setting

10 or 32: Wifi mode open

00:

Positive output

7. Advanced Setting

In the state of power-off, long press and hold then press into

advanced setting mode. Then press M to set relative item.

For Opt:

When the thermostat connect with gas boiler, the terminal short circuit

is extinguished, the open circuit is ignition. Then Turn to the reverse output ‘01'.

IX. Phone Port Operation Instruction

1. Install APP on phone

For iOS system: Login in App Store, search “ Beok Home”, you can

download it on your iphone.

For Android System: Login in Google Play, search “Beok Home”, you can

download it on your phone.

Or scan below code to download:

2. Connection Thermostat with Phone

Thermostat Setting

At this time, wifi symbol will be twinkling quickly and frequently. It means, you can

connect thermostat with phone now.

When wifi symbol stop twinkling, it means thermostat is successfully connected with

phone.

Twinkling Quickly and Frequently:

Connection can start

Twinkling slowly:

Off Line

Twinkling Stops:

Successful Connection

Connection with Phone

Open Beok Home APP on your phone, you can see APP welcome page

Powered off state

DFI Precision

for room temp. 0.5-3℃1℃

Opt Linkage terminal

output direction

00:Set temp>Room temp,

relay close

01:Set temp<Room temp,

relay close

When the Opt is adjusted to 00, thermostat can also be used in the

water floor heating system, the water temperature is too low will prohibit the output

(relay output 3A/200W), this function only suits for wifi linkage function thermostat.

DFI:

DFI is hysteresis for room temp, factory set is 1,if 1 is too big for you,

it can be adjusted to 0.5.

08: just display

00: factory reset

01：Open

Explanation:

For example,If Room temp is 22℃,Hysteresis‘DFI’=1.

when room temp rise to 23℃,the relay will stop outputting;

when room temp down to 21℃, the relay will output again and start heating.

Time setting

In the power off state, long press the up button for 10 seconds

blue

When the thermostat Wifi Symbol twinkling fast, you can start the

configure on your Phone.

Press C onfigure key

Enter your wifi name and password, then start connection at below. When

connection success, it will appear “Connection Success”.

After connection success, you need press “Search “ key.

a. Long press HVAC for 5 seconds, it will appear Edit Thermostat page.

b. Press Modify Current Thermostat.

c.You can change HVAC to room 1, Bedroom Bath room, or anything you

like.

APP Interface on the Phone

Ther mo stat Na me

Retu rn R efres h

Room Tempe ra ture

Heat in g State

Scre en L ockin g

Anti -f reezi ng

Long p re ss into Ad va nced Sett in g

Manu al /Auto m od e

Powe r Sw itch

Peri od D ispla y

Tim e Ma tchin g

Set Temper at ure

Adju st ment( do wn)

Curr en t Temp erature

Set Temper at ure

Thermostat Setting through Phone Operation

1. Clock : You can press Time Matching switch to match your phone

clock with thermostat clock.

2. Children lock (screen locking) : Press to lock the thermostat.

3. Anti-Freezing: Press thermostat will show on the screen , it

means Anti-freezing function open.

4. Temperature setting: You can drag the pointer on

Temperature Setting Dial to set temperature. Or press and to set

temperature step.

directly

5.Period setting: Long press Period Display, then

you will go into the Period Setting mode:

Touch work loop: you can choose the week program mode: 5+2/ 6+1 /7.

Touch each time value: you can set the time of the period.

Touch each temperature: you can set the temperature of the period.

Notice: When you choose the program mode to 7, Weekend program data

set will no appear.

6. Advanced Setting: Long Press Senior , you will go into Advanced

setting mode:

Press S earch key

Then it will appear your wifi thermostat HVAC. HVAC is the factory setting

name, when you have more than 2 thermostats, you can change it to any

name you want.

V 2 0 1 9 0 2

Thank you for buying this product!

7. Switch of Manual mode and Auto mode: Press to switch manual

mode or Auto mode.

8.Power off : Press to turn on or off thermostat.

This product is suitable for standard 80*80mm wall box and 60 mm

european round box.

XII. ATT:

Please read this manual for complete instructions on installing and

operating your thermostat. If you require further assistance, please

feel free to contact us.

Display Code Function Setting And Options Factory Defult

SVH High limit temp.

for internal sensor 5-99℃35℃

SVL Low limit temp.

for internal sensor 5-99℃5℃

ADJ Temp.calibration Check and calibrate the

actual room temp.

0.5℃accuracy

calibrate

FRE

Frost-protection

00：Close 00

PON Power memory 00：Off

01：On 00

01：Open

Attention to Phone WiFi Connection:

Table of contents

Other Beok Controls Thermostat manuals

Beok Controls

Beok Controls BOT Series User manual

Beok Controls

Beok Controls TDR-83 User manual

Beok Controls

Beok Controls TGP51WIFI User manual

Beok Controls

Beok Controls TGR87WIFI-WP User manual

Beok Controls

Beok Controls TOL62A Series User manual

Beok Controls

Beok Controls TDS23 User manual

Beok Controls

Beok Controls TDS21 User manual

Beok Controls

Beok Controls TGT70-AC2 User manual

Beok Controls

Beok Controls TGW60 User manual

Beok Controls

Beok Controls TGR-86 User manual

Beok Controls

Beok Controls TDS23M User manual

Beok Controls

Beok Controls TOL313WIFI Series User manual

Beok Controls

Beok Controls TDS75 User manual

Beok Controls

Beok Controls TGR-86 User manual

Beok Controls

Beok Controls TDS21-AC User manual

Beok Controls

Beok Controls TGP51 User manual

Beok Controls

Beok Controls TDS23-AC2 User manual

Beok Controls

Beok Controls TGR87 Series User manual

Beok Controls

Beok Controls BOT-205 User manual

Beok Controls

Beok Controls TOL47 Series User manual

Beok Controls

Beok Controls TGR-86 User manual

Beok Controls

Beok Controls TDS23WIFI-AC2 User manual

Beok Controls

Beok Controls WIFI-AC2 User manual

Beok Controls

Beok Controls TOL63R User manual

Popular Thermostat manuals by other brands

EWELLY

EWELLY EW-181 manual

Prolon

Prolon T1100 Hardware guide

Computherm

Computherm Q20 operating instructions

Heatmiser

Heatmiser neoStat user manual

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA user manual

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat user manual

Saswell

Saswell SAS920XWHB-7-S-RF User manual and warranty card

Aircalo

Aircalo TFP1-ET85P2 operating manual

Honeywell

Honeywell CM721 user manual

Carrier

Carrier DEBONAIR 33CS Installation and operating instructions

Lennox

Lennox iHarmony Zone Thermostat Installation and setup guide

Gemtech

Gemtech GT7000 Operation

Rollei

Rollei Smartes 45000 manual

Sinope

Sinope TH1300RF user guide

Honeywell

Honeywell RLV4305 owner's guide

Honeywell

Honeywell Prestige 2.0 THX9421 manual

NuTone

NuTone NTBZ48 Installation & operation guide

Stelpro

Stelpro MAESTRO ASMT402AD user guide