BenQ FP93V User manual
Welcome
FP93V
LCD Color Monitor
19.0" LCD Panel Size
User’s Manual
2
Copyright
Copyright © 2005 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness
for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication
and to make changes from time to time in the contents hereof without obligation of BenQ
Corporation to notify any person of such revision or changes.
Please follow these safety instructions for best
performance, and long life for your monitor
Power Safety
•The AC plug isolates this equipment from the AC supply.
•The power supply cord serves as a power disconnect device for pluggable equipment. The socket
outlet should be installed near the equipment and be easily accessible.
•This product should be operated from the type of power indicated on the marked label. If you are
not sure of the type of power available, consult your dealer or local power company.
Care And Cleaning
•Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
•Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked
or covered. Your monitor should never be placed near or over a radiator or heat source, or in a
built-in installation unless proper ventilation is provided.
•Never push objects or spill liquid of any kind into this product.
Servicing
•Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as
dropping or mishandling occurs, contact qualified service personnel for servicing.
i
ii
iii
iv
v
Table of Contents 3
Table of Contents
Getting started ...................................................................................................................... 5
Getting to know your monitor ............................................................................................ 6
Front View ...................................................................................................................6
Back View .....................................................................................................................6
How to install your monitor hardware ............................................................................... 7
How to detach the stand base ...................................................................................10
Getting the most from your BenQ monitor ...................................................................... 11
How to install the monitor on a new computer ......................................................12
How to upgrade the monitor on an existing computer ..........................................13
How to install on Windows XP systems ...................................................................14
How to install on Windows 2000, ME, & 98 systems ..............................................15
How to complete the Windows Upgrade Device Driver Wizard ...........................16
How to adjust the screen resolution .................................................................................. 18
How to adjust the screen refresh rate ................................................................................ 19
How to set the picture optimization .................................................................................. 20
How to adjust your monitor ..............................................................................................21
A Look at the Control Panel .....................................................................................21
Hot Key Mode ...........................................................................................................22
Main Menu Mode ......................................................................................................22
Troubleshooting ................................................................................................................. 30
Frequently Asked Questions (FAQ) .........................................................................30
Need More Help? .......................................................................................................31
Supported operating modes ............................................................................................... 32
Specifications ...................................................................................................................... 33
i
Table of Contents4
5Getting started
Getting started
When unpacking please check you have the following items. If any are missing or damaged, please
contact the place of purchase for a replacement.
11
1
1
BenQ LCD Monitor
Quick Start Guide
CD-ROM
Power Cord
Signal Cable: D-Sub
Signal Cable: DVI-D
P
/
N
:
5
3
.
L
9
0
0
3
.
0
0
2
6 Getting to know your monitor
Getting to know your monitor
Front View
Back View
1. Power AC input jack
2. DVI-D Connector
3. D-Sub Connector
11
1
2
7How to install your monitor hardware
How to install your monitor hardware
If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the
power to the monitor until instructed to do so.
1. Attach the monitor base.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
Lay the screen down on a flat clean padded surface.
Orient and align the stand base socket with the end of the
stand arm, then push the stand base until it locks into
place.
Carefully lift the monitor and place it upright on its stand
on a flat even surface.
You should position the monitor and angle the screen
to minimize unwanted reflections from other light
sources.
11
1
3
-5 ~ +20
8 How to install your monitor hardware
2. Connect the video cable.
Connect one end of the DVI-D cable to the monitor
DVI-D socket and the other end to the DVI-D port on
your computer.
The DVI-D format is used for direct digital connection
between source video and digital LCD monitors or
projectors. The digital video signals produce a
superior quality picture than analog video signals.
Connect the plug of the D-Sub cable (at the end without
the ferrite filter) to the monitor D-Sub socket. Connect
the other plug of the D-Sub cable (at the end with the
ferrite filter) to the computer video D-Sub socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
’POWER IN’ on the rear of the monitor. Do not connect
the other end to a power point just yet.
9How to install your monitor hardware
4. Route the cables behind the monitor stand.
Route the cables together via the loose bracket as illus-
trated.
Alternatively, you may release the cable retaining clip by
squeezing the clip inwards as illustrated.
In case you intend to store your monitor when not in
use, please keep the cable retaining clip somewhere
safe for future storage.
Position the cables together and route them through the
hole in the monitor stand.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point
and turn it on.
Turn on the monitor by pressing the power button located
at the top of the row of buttons on the left edgeof the mon-
itor.
Turn on the computer too, and follow the instructions in
Section 4: Getting the most from your BenQ monitor to
install the monitor software.
10 How to install your monitor hardware
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler
or a mouse will crack the glass or damage the LCD
substrate voiding your warranty. Sliding or scraping
the monitor around on your desk will scratch or
damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
2. Press the Lock button on the stand base while pulling
the edge of the monitor base away from the monitor
stand.
Hold the base tightly in the hand to prevent it falling
downwards while pressing the Lock button.
Table of contents
Other BenQ Monitor manuals
BenQ
BenQ FP91E User manual
BenQ
BenQ VZ Series User manual
BenQ
BenQ XL2410T User manual
BenQ
BenQ EW3270UE User manual
BenQ
BenQ FP93E S User manual
BenQ
BenQ SV500 User manual
BenQ
BenQ PL4901 User manual
BenQ
BenQ GL2430HM User manual
BenQ
BenQ G2200W - 22" LCD Monitor User manual
BenQ
BenQ Q7T3 Series User manual
