BenQ FP202W V3 User manual
Welcome
FP202W V3/FP202W A
20.1" (51.1cm) Wide-Screen LCD Monitor
User Manual
2
Copyright
Copyright © 2007 by BenQ Corporation. All rights reserved. No part of this publication may be
reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language
or computer language, in any form or by any means, electronic, mechanical, magnetic, optical,
chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with
respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness
for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication
and to make changes from time to time in the contents hereof without obligation of BenQ
Corporation to notify any person of such revision or changes.
Please follow these safety instructions for best performance,
and long life for your monitor
Power Safety
•The AC plug isolates this equipment from the AC supply.
•The power supply cord serves as a power disconnect device for pluggable equipment. The socket
outlet should be installed near the equipment and be easily accessible.
•This product should be operated from the type of power indicated on the marked label. If you are
not sure of the type of power available, consult your dealer or local power company.
Care And Cleaning
•Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD
monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass
cleaners.
•Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked
or covered. Your monitor should never be placed near or over a radiator or heat source, or in a
built-in installation unless proper ventilation is provided.
•Never push objects or spill liquid of any kind into this product.
Servicing
•Do not attempt to service this product yourself, as opening or removing covers may expose you to
dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as
dropping or mishandling occurs, contact qualified service personnel for servicing.
Table of Contents 3
Table of Contents
Getting started ...................................................................................................................... 4
Getting to know your monitor ............................................................................................ 6
Front view ....................................................................................................................6
Back view (FP202W V3) .............................................................................................6
Back view (FP202W A) ...............................................................................................7
How to assemble your monitor hardware ........................................................................... 8
How to detach the stand base ...................................................................................11
Getting the most from your BenQ monitor ...................................................................... 12
To install the monitor on a new computer ..............................................................13
To upgrade the monitor on an existing computer ..................................................14
How to install on Windows Vista system .................................................................15
How to install on Windows XP system ....................................................................16
How to adjust the screen resolution .................................................................................17
How to adjust the screen refresh rate ................................................................................18
Picture optimization ...........................................................................................................19
How to adjust your monitor .............................................................................................. 20
The control panel ......................................................................................................20
Hot key mode ............................................................................................................21
Main menu mode ......................................................................................................22
Troubleshooting ................................................................................................................. 32
Frequently asked questions (FAQ) ...........................................................................32
Need more help? ........................................................................................................33
Supported PC Timings .......................................................................................................34
Specifications ...................................................................................................................... 35
4 Getting started
1. Getting started
Your FP202W V3/FP202W A will provide the optimal display performance of the video resolution
standard of 1680 x 1050. Please ensure that your graphic card supports the resolution of
1680 x 1050.
When unpacking please check you have the following items. If any are missing or damaged, please
contact the place of purchase for a replacement.
BenQ LCD Monitor
Quick Start Guide
CD-ROM
Power Cord
(Picture may differ from product
supplied for your region)
Signal Cable: D-Sub
5Getting started
Consider keeping the box and packaging in storage for use in the future when you may need to transport
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Signal Cable: DVI-D (optional)
(Not available for FP202W A)
6 Getting to know your monitor
2. Getting to know your monitor
Front view
Back view (FP202W V3)
1. Power AC input jack
2. DVI-D Connector
3. D-Sub Connector
7Getting to know your monitor
Back view (FP202W A)
1. Power AC input jack
2. D-Sub Connector
8 How to assemble your monitor hardware
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate
voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor
surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded sur-
face.
While holding the monitor firmly against the desk, pull
the monitor stand arm upwards clear of the monitor.
Orient and align the stand base socket with the end of the
stand arm, then push them together until they click and
lock into place.
Gently attempt to pull them back apart to check that they
have properly engaged.
Carefully lift the monitor, turn it over and place it upright
on its stand on a flat even surface.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
-2 ~ +20
9How to assemble your monitor hardware
2. Connect the PC video cable.
Do not use both DVI-D cable and D-Sub cable on the
same PC. The only case in which both cables can be
used is if they are connected to two different PCs with
appropriate video systems. (Not available for FP202W A)
Connect one end of the DVI-D cable to the monitor
DVI-D socket and the other end to the DVI-D port on
your computer. (optional, not available for FP202W A)
The DVI-D format is used for direct digital connection
between source video and digital LCD monitors or
projectors. The digital video signals produce a superior
quality picture than analog video signals.
Connect the plug of the D-Sub cable (at the end without
the ferrite filter) to the monitor D-Sub socket. Connect the
other plug of the D-Sub cable (at the end with the ferrite
filter) to the computer video D-Sub socket.
Tighten all finger screws to prevent the plugs from acci-
dently falling out during use.
Either
Or
3. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
‘POWER IN’ on the rear of the monitor. Do not connect
the other end to a power point just yet.
10 How to assemble your monitor hardware
4. Route the cables via the cable clip.
Release the cable retaining clip by squeezing the clip
inwards as illustrated. Position the cables together and
reinsert the clip over them to retain the cables neatly in
place behind the monitor stand.
5. Connect the power cable to a wall power outlet and
press Power on the monitor.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power key located at
the top of the row of keys on the right edge of the monitor.
Turn on the computer too, and follow the instructions in
Section 4: Getting the most from your BenQ monitor
on page 12 to install the monitor software.
Enter
This manual suits for next models
1
Table of contents
Other BenQ Monitor manuals
