BEMIS IMUNSEN TOWER User manual
IMUNSEN TOWER
AIR PURIFIER MANUAL
3
DEAR CUSTOMERS,
Thank you for purchasing the Bemis Imunsen Tower Air Purifier.
Please read carefully through the user manual for safe and proper use.
This manual also contains warranty details.
CAUTIONS
Cautions
PRODUCT INTRODUCTION
Product Parts
Product Diagram
USER GUIDE
Connecting the Purifier
Diffuser Oil Capsule (Optional)
Placing the Purifier
Functionality
MAINTENANCE
Cleaning Filter & Filter Storage
Cleaning Dust Sensor
How to use the APP (Android & IOS) (SMART TOWER ONLY)
SPECIFICATIONS
Product Functions
FAQ
Warranty
TABLE OF CONTENTS
4
6-7
8-15
16-23
24-29
4 5
CAUTIONS
CAUTIONS
TRANSPORTATION
POWER CORD
IN USAGE
INSTALLATION
REGULATIONS
When transporting the product, please make sure
the device is turned off and unplugged.
Insert the filter cover properly before usage. Make sure
the air purifier is at least 4 inches away from the wall.
Do not use the purifier in humid locations.
Severe pressure or bending the power cord could cause
damage. Do not use inadequate or non-certified power adaptors.
Do not temporaily replace the power cord with inadequate or
non-certified power adaptors. Do not pull the power cord with
force when unplugging. User must hold the head of the power
cord when connecting. When transporting or cleaning the
device, please make sure to turn the power off and unplug
the product beforehand.
Immediately stop the purifier if it behaves oddly.
Do not cover the air inlet area.
6 7
PRODUCT DIAGRAM
PRODUCT INTRODUCTION
FRONT BACK
Humitidy Sensor
PM 2.5 Dust Sensor
Filter Storage Cover
Power Port
Additional
Air Inlet
Air Inlet
(3 Sides)
Air Quality
LED Display
Base
PRODUCT PARTS
PRODUCT INTRODUCTION
Device Body
Maple Wood Panel
HEPA 13 Filter Power Cord
Protective Cover
Diffuser
(Optional Detaching Hook)
8 9
CONNECTING THE PURIFIER
USER GUIDE
1. Open the filter cover situated at the
back of the product.
2. Press down and pull the filter out.
3. Remove filter packaging.
4. Place the filter back into the product.
CONNECTING THE PURIFIER
Do not touch with wet hands
USER GUIDE
5. Unpack the maple wood panel.
6. Connect the power cable to the plug situated
at the back of the purifier.
10 11
DIFFUSER OIL CAPSULE (OPTIONAL)
USER GUIDE
1. Use the hook accessory to remove the maple wood panel.
2. Remove the safety net with a screwdriver.
3. Remove the capsule cover from the blower fan case, then peel off the top foil.
Do not poke the clear protective film that contains the essential oil.
4. Reassemble the maple wood panel. The purifier is ready to be used.
The purifier does not operate when the filter cover is open, so please
properly attach the filter before turning on the device.
Remove capsule cover Remove top foil Reassemble capsule cover
USER GUIDE
PLACING THE PURIFIER
MINIMUM 8 INCHES (20 CM)
MINIMUM 4 INCHES (10 CM)
MINIMUM 8 INCHES (20 CM)
Maintain the above indicated distances from other objects/walls when using the purifier.
To use the purifier to its full potential, please make sure it is placed at over 4 inches away
from the wall. Place the provided transparent cover on top when not using.
Available oil scents come in lavender and eucalyptus.
12 13
USER GUIDE
FUNCTIONALITY FUNCTIONALITY
AIR QUALITY DISPLAY IN NUMBERS & COLORS
0~30
Good (Green)
PM 2.5
Air Quality Display
31~80
Average (Blue)
81~150
Bad (Orange)
ADDITIONAL
INDICATOR
FILTER
REMINDER
When you turn on the power, the time before filter
replacement is shown on the screen.
Check whether the filter storage cover is properly placed.
CAUTION: After replacing the filter, turn off the power and push
the Auto button and Cyclone button at the same time
to reset the filter replacement time.
PRE-FILTER
H13 TRUE HEPA FILTER
DEODORIZATION FILTER
MAPLE WOOD PANEL
Removes larger obstacles such as hair, pollen, pet fur and dander.
H13 True HEPA Filter removes 99.97% of fine dust.
Eliminates VOC caused by daily movement, harmful gases, and pet odors.
Natural odor neutralization and aromatherapy.
1514
USER GUIDE USER GUIDE
FUNCTIONALITY
SMART FUNCTIONS
Ambient
light sensor
Power Auto Wind Level
(3 levels)
Sleep
Mode
Cyclone Optional
Power Saving
Optional
Wifi
POWER
OPTIONAL
POWER SAVE
AMBIENT
LIGHT SENSOR
OPTIONAL WIFI (SMART TOWER ONLY)
AUTO
WIND POWER (3 LEVELS)
SLEEP MODE
CYCLONE
Turns the power on and off. Night mode and
power save mode recommended for night usage.
Converts to the power save
mode. The wind speed decreases
to reduce power consumption.
Automatically changes mode
based on the brightness of the
room. Automatically activates
sleep mode when in dark
areas, and returns to auto mode
once the area brightens up.
Operates when manually set. Operates under 3
different modes (low-moderate-strong) set by
the user.
Operated automatically during night time. The fan
speed automatically reduces, making less noise and
using minimum energy. Sleep mode is unavailable
when the lights are turned on.
Product can be controlled and monitored via
mobile app if set up.
Purify the air efficiently with full
power. Most efficient when used
while cleaning, or after cooking.
Automatically transits to auto
mode after 20 minutes of
operating under cyclone mode.
Automatically changes function levels according
to the air quality, using the 2.5pm dust sensor
situated at the back of the purifier.
16 17
MAINTENANCE MAINTENANCE
CIRCULAR FILTER &
CLEANING FILTER STORAGE
If the device has been in usage for 400 hours, it will
automatically alarm to clean the filter storage area.
Please clean the filter storage area when notified to
maintain the product at good condition.
When the air purifier is not in use, place the provided
cover on top of the maple wood panel to prevent dust
from entering.
WARNING: Please do not use water to
clean the circular filter.
*Filter is recommended
to be replaced every year.
CLEANING THE DUST SENSOR
• Cleaning once every 3 months is recommended. If the
sensor lens is not cleaned, it could cause miscalculations.
• Please open the sensor cover, then use a compressor
or wind power to clean the inner part of the device.
•
WARNING: Please do not use warm wind.
Read and save these instructions.
18 19
HOW TO USE THE APP (ANDROID & IOS) (SMART TOWER ONLY)
1. Download the Bemis Air App
Search and download the Bemis
Air App on the Google Play Store
or Apple App Store
Launch the app and tap
“Account Registration”. Create
an account with your email
address. A comfirmation email
will be sent to your email address.
Choose “Ativate Account” in the
confirmation email to finish
account registration.
After registering your account
and logging in, press the Wi-Fi
button on the device.
2. Account Registration 3. Turn on the Wi-Fi
Function from the Device
MAINTENANCE
Table of contents
Other BEMIS Air Cleaner manuals
