Belkin F5U261 User manual

P74102em F5U261

Hi-Speed USB 2.0

4-Port Drive Bay Hub User Manual

Manuel d’utilisation

du hub 4 ports en baie

Benutzerhandbuch für Hub mit 4 Anschlüssen für

USB 2.0 Hi-Speed zum Einbau in Laufwerkschacht

Gebruikershandleiding Hi-Speed USB 2.0

schijfpositiehub met 4 poorten

Manual del usuario del Concentrador USB 2.0

de alta velocidad y 4 puertos para bahía interna

Hi-Speed USB 2.0 Manuale utente

dell'hub del telaio dell'unità a 4 porte

Manual do utilizador do hub interno de 4

portas USB 2.0 de alta velocidade

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:03 AM Page a

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:03 AM Page b

TABLE OF CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:03 AM Page c

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:03 AM Page d

Congratulations and thank you for purchasing the Belkin Hi-Speed

USB 2.0 4-Port Drive Bay Hub (the Hub). The Hub provides four

downstream USB ports that are compatible with Hi-Speed USB 2.0

devices as well as with low- and full-speed USB 1.1 devices.

This means that the Hub is backward-compatible with all of your

current USB 1.1 peripherals while it enables the ultrafast performance

levels of next-generation USB 2.0 devices, including scanners,

printers, mass storage devices, and high-resolution cameras. The Hub

is self-powered, allowing for the cascading of devices with additional

hubs, so that you can connect up to 127 USB devices to a single port.

The Hub provides a multicolored status LED for each individual port,

and a master power LED. For additional information, refer to the

“Technical Specifications” section.

Fig. 1

INTRODUCTION

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:03 AM Page 1

FEATURES

• Hi-Speed USB 2.0 (data rate 1.5/12/480Mbps)

specification compliance

• Backward-compatible with USB 1.1 (data rate 1.5/12Mbps)

• Windows®98 SE, Me, 2000, and XP compatibility

• USB Implementers Forum (USB-IF) approval

• Plug-and-Play functionality

• Hot swap capability of USB devices

• Over-current detection and protection

• Port-status indicator LEDs

• Four 480Mbps downstream ports

• Sizing to fit in 3.5-inch drive bay

• Powered by your computer’s power supply

Package Contents

• Hi-Speed USB 2.0 4-Port Drive Bay Hub

• USB “A” to “B” Device Cable

• User Manual

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:03 AM Page 2

TECHNICAL SPECIFICATIONS

Upstream Ports 1

Downstream Ports 4

Per-Port Voltage DC +5V

Per-Port Current 500mA (max)

Power Mode Self-powered

Operating Temperature 5º C ~ 40º C

Storage Temperature -20º C ~ 60º C

Enclosure Plastic

Power Supply Powered by computer

power supply

Main Power LED

Color Definitions:

Off Not Operational

Red Operational

Port-Status LED

Color Definitions:

Off Not Operational

Amber Error Condition

Green Fully Operational

Blinking Off/Green Software Attention

Blinking Off/Amber Hardware Attention

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:03 AM Page 3

INSTALLATION

1. Turn off power and remove the cover from your computer.

2. Remove the front panel insert from an empty 3.5-inch drive

bay, and install the Hub into the drive bay (consult your

computer manual for information regarding installation of

drive bay compatible devices). (See Fig. 2.)

Fig. 2

3. Plug a compatible power connector from your computer

power supply onto the power connector on the rear of the

Hub. (See Fig. 3.)

Fig. 3

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:03 AM Page 4

INSTALLATION (CONTINUED)

4. Plug the provided USB cable into the USB connector on

the rear of the Hub. (See Fig. 4). Plug the other end of

the USB cable into an available port on a Hi-Speed USB

2.0 host adapter card.

Fig. 4

Note A: The Hub must be connected to a USB

2.0-compliant host in order to function in high-speed

mode (480Mbps data rate). If the Hub is connected to a

USB 1.1-compliant host, it will operate only in low- or

full-speed mode (1.5Mbps or 12Mbps).

5. Replace your computer’s cover and turn the power on.

6. Your Windows operating system will now detect the Hub

and install the required drivers. (The Windows “Install

New Hardware Wizard” may prompt you to provide your

Windows Installation CD to complete the driver

installation process.)

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:04 AM Page 5

INSTALLATION (CONTINUED)

Note B—VERY IMPORTANT: Hi-Speed USB 2.0 hub drivers are

included with most USB 2.0 PCI upgrade cards, and are

pre-installed along with the PCI card drivers. If you purchased

an upgrade card prior to the release of Hi-Speed USB 2.0 hub

support, please check with your PCI card vendor for an updated

USB 2.0 driver. The Belkin USB 2.0 driver supports all

competitive PCI cards based on the NEC host controller, with

the exception of those released by Adaptec. The most recent

Belkin driver is available at belkin.com.

7. Plug the USB A connector of a USB device, or an additional

hub, into any of the downstream ports of the Drive Bay Hub.

(See Fig. 5.)

Fig. 5

Note C: When plugging a USB device into the Hub for the first

time, it may be necessary to reinstall the USB drivers for that

device. Likewise, if you move the device to another port on the

Hub, it may be necessary to reinstall the drivers.

P74102-em-F5U261-man-9-02.qxd 9/24/02 10:04 AM Page 6

Other manuals for F5U261

Table of contents

Languages:

Other Belkin Switch manuals

Belkin

Belkin OmniView F1DW116C User manual

Belkin

Belkin OmniView F1DP104Aea User manual

Belkin

Belkin F1DN104K-3 Instruction sheet

Belkin

Belkin BusStation F5U1000 User manual

Belkin

Belkin F1DK102PEA User manual

Belkin

Belkin F1DA104Z - OmniView PRO3 USB User manual

Belkin

Belkin F1DN102P User manual

Belkin

Belkin P74081-A, F5U217 User manual

Belkin

Belkin F5U413 User manual

Belkin

Belkin OMNIVIEW P74696 User manual

Belkin

Belkin OmniView F1DP108G Reference guide

Belkin

Belkin F5U237 User manual

Belkin

Belkin F1DM102U User manual

Belkin

Belkin OMNIVIEW F1DA104PEA User manual

Belkin

Belkin OmniView Dual-User PRO3 User manual

Belkin

Belkin 16-Port Gigabit Switch User manual

Belkin

Belkin F1U400 - 4x4 USB Peripheral Switch Sharing User manual

Belkin

Belkin Bitronics F1U128-KIT User manual

Belkin

Belkin OmniView User manual

Belkin

Belkin F5U304 User manual

Belkin

Belkin F5U402-03IN-KIT User manual

Belkin

Belkin F1DC116V User manual

Belkin

Belkin PRO User manual

Belkin

Belkin F1DN102F-3 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual